LENCO SCD-620 User manual
Model No: SCD-620
User manual – Portable Radio/CD Player wit microp one
Gebruikers andleiding – draagbare radio/cd-speler met microfoon
Bedienungsanleitung – Tragbares Radio/CD-Player mit Mikrofon
Mode d’emploi – Radio/lecteur CD portatif avec microp one
Manual de usuario – Reproductor de CD/ radio portátil con micrófono
Index
Englis ········································································································ 3
Nederlands ······························································································· 12
Deutsc ···································································································· 21
Français ···································································································· 30
Español ····································································································· 39
Version: 1.0
2
Englis
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or bloc any ventilation openings. When placing the device on a shelf, leave 5 cm (2”)
free space around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other
heat-generating products or na ed flame. The device can only be used in moderate climates.
Extremely cold or warm environments should be avoided. Wor ing temperature between
0° and 35°C.
4. Avoid using the device near strong magnetic fields.
5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the
device following the instruction manual. During file transmission, please handle with care and
operate in a static-free environment.
6. Warning! Never insert an object into the product through the vents or openings. High voltage
flows through the product and inserting an object can cause electric shoc and/or short circuit
internal parts. For the same reason, do not spill water or liquid on the product.
7. Do not use in wet or moist areas such as bathrooms, steamy itchens or near swimming pools.
8. The device shall not be exposed to dripping or splashing and ma e sure that no objects filled with
liquids, such as vases, are placed on or near the apparatus.
9. Do not use this device when condensation may occur. When the unit is used in a warm wet room
with damp, water droplets or condensation may occur inside the unit and the unit may not
function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power:
the unit should be dry before getting any power.
10. Although this device is manufactured with the utmost care and chec ed several times before
leaving the factory, it is still possible that problems may occur, as with all electrical appliances.
If you notice smo e, an excessive build-up of heat or any other unexpected phenomena, you
should disconnect the plug from the main power soc et immediately.
11. This device must operate on a power source as specified on the specification label. If you are not
sure of the type of power supply used in your home, consult your dealer or local power company.
12. Keep away from animals. Some animals enjoy biting on power cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids.
To remove severe stains, you may use a damp cloth with dilute detergent.
14. The supplier is not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.
15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise,
data may be corrupted or lost.
16. If the unit has USB playbac function, the USB memory stic should be plugged into the unit
directly. Don’t use an USB extension cable because it can cause interference resulting in failing of
data.
17. The rating label has been mar ed on the bottom or bac panel of the device.
18. This device is not intended for use by people (including children) with physical, sensory or mental
disabilities, or a lac of experience and nowledge, unless they’re under supervision or have
received instructions about the correct use of the device by the person who is responsible for
their safety.
19. This product is intended for non professional use only and not for commercial or industrial use.
20. Ma e sure the unit is adjusted to a stable position. Damage caused by using this product in an
unstable position vibrations or shoc s or by failure to follow any other warning or precaution
contained within this user manual will not be covered by warranty.
21. Never remove the casing of this device.
22. Never place this device on other electrical equipment.
23. Do not allow children access to plastic bags.
3
24. Only use attachments/accessories specified by the manufacturer.
25. Refer all servicing to qualified service personnel. Servicing is required when the device has been
damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or
objects have fallen into the device, when the device has been exposed to rain or moisture, does
not operate normally, or has been dropped.
26. Long exposure to loud sounds from personal music players may lead to temporary or permanent
hearing loss.
27. If the product is delivered with power cable or AC power adaptor:
If any trouble occur, disconnect the AC power cord and refer servicing to qualified
personnel.
Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and
the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it.
Keep the entire device out of children’s reach! When playing with the power cable, they can
seriously injure themselves.
Unplug this device during lightning storms or when unused for a long period.
The soc et outlet must be installed near the equipment and must be easily accessible.
Do not overload ac outlets or extension cords. Overloading can cause fire or electric shoc .
Devices with class 1 construction should be connected to a main soc et outlet with a
protective earthed connection.
Devices with class 2 construction do not require a earthed connection.
Always hold the plug when pulling it out of the main supply soc et. Do not pull the power
cord. This can cause a short circuit.
Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or
electric shoc .
28. If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:
“Do not ingest battery, Chemical Burn Hazard” or equivalent wor ing.
[The remote control supplied with] This product contains a coin/button cell battery. If the
battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to
death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and eep it
away from children.
If you thin batteries might have been swallowed or placed inside any part of the body,
see immediate medical attention.
29. Caution about the use of Batteries:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
Battery cannot be subjected to high or low extreme temperatures, low air pressure at high
altitude during use, storage or transportation.
Replacement of a battery with an incorrect type that can result in an explosion or the
lea age of flammable liquid or gas.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery,
that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or that lea age of flammable liquid or gas.
A battery subjected to extremely low air pressure that may result in an explosion or the
lea age of flammable liquid or gas.
Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
• Unpac all parts and remove protective material.
• Do not connect the unit to the mains before chec ing the mains voltage and before all other
connections have been made.
4
CONTENTS
Power cord
Microphone
5
LOCATION OF CONTROLS
1. ANTENNA
2. HANDLE
3. CD DOOR
4. FUNCTION SWITCH
5. VOLUME KNOB
6. SKIP-
7. SKIP+
8. POWER ON/OFF
9. LED DISPLAY/FUNCTION INDICATOR
10. MICROPHONE JACK
11. PLAY/PAUSE
12. STOP
13. PROGRAM/REPEAT
14. TUNING KNOB
15. AUX IN JACK (3.5MM)
16. HEADPHONE JACK (3.5MM)
17. AC SOCKET
18. BATTERY COMPARTMENT
6
LOCATION OF CONTROLS
to AC IN to a wall outlet
17
18
2
3
11
12
13
14
15
4
5
6
7
8
9
10
16
1
7
POWER SUPPLY
1. To power the device, plug the AC power cord into the AC power input on the rear of the unit and
a standard power outlet
2. For battery power, this unit requires 6 x C size batteries (Not included).
POWER SOURCE
Press the “POWER” button to turn the device.
Set the “FUNTION” switch to select different mode
CD/AUX
FM
VOLUME
Adjust the “VOLUME” nob to the desired volume level.
ANTENNA
Use Antenna to improve the signal reception.
1. Extend the antenna
2. Adjust the position of the antenna for the best reception
CD
Select the CD mode.
1. Put CD into the CD door insides
2. Auto CD reading & playing from first trac
3. Press the “PLAY/PAUSE” button to do playbac or pause playbac temporarily
4. Press the “SKIP+/-” button to s ip the next or previous trac s
5. Press and Hold the “SKIP+/-” button search the point of sound quic ly
6. Press the “STOP” button to stop the playbac
PROGRAMMED (CD MODE)
CD = max 20 trac s
1. Press “PROGRAM” button (Sure to press “STOP” button before)
* Program Indicator flashing
2. P01 will appear blin ing in the display, press “SKIP+/-” to select the trac Press “PROGRAM”
button again to save the selected trac
3. Press “PLAY/PAUSE” button to play the programmed trac list “PROGRAM” indicator on
4. Press “STOP” button twice to cancel the programmed trac list
* Repeat One and Repeat All function is available for programmed trac list
8
REPEAT
Press “REPEAT” Button to choose the different function in CD mode as follows:
1. Repeat One = Repeat indicator on
2. Repeat All = Repeat indicator flashing
3. Normal Playbac = No Repeat indicator
FM RADIO
1. Select the FM Radio mode.
2. Adjust the “TUNING” nob to the desired station
* FM Stereo indicator on = Stereo broadcast program is received
AUX IN
1. Select the Aux mode.
2. Use 3.5mm jac Aux In cable (not included) to connect the Aux in jac and external audio player
Control the music from the external audio player
3. Change the volume level on this item or External Music Device separately
HEADPHONE JACK
Use 3.5mm headphone plug (not included) to connect the 3.5mm headphone jac
MICROPHONE JACK
1. Use 3.5mm microphone plug to connect the 3.5mm microphone jac
2. Control the music from the device
3. Change the volume level on this item
4. Enjoy the singalong function
ENERGY SAVING
To comply with the energy saving requirement this device will automatically switch to standby mode
when no music has been playing for 15 minutes.
9
TECHINCAL SPECIFICATIONS
Power supply:
AC 230 ~ 50Hz
DC 9V 6 x 1.5V “C” TYPE BATTERIES
Frequency range:
FM 88-108 MHz
Power consumption: 13W
Audio power output: 2 x 1W
Dimensions (W x D x H): 217 x 220 x 118mm
Weight: 1 g
Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of
repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the
warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations
of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the
instruction, specifications and pictures in this documentation may differ slightly from your particular
situation. All items described in this guide for illustration purposes only and may not apply to particular
situation. No legal right or entitlements may be obtained from the description made in this manual.
Disposal of t e Old Device
This symbol indicates that the relevant electrical product or battery should not be
disposed of as general household waste in Europe. To ensure the correct waste
treatment of the product and battery, please dispose them in accordance to any
applicable local laws of requirement for disposal of electrical equipment or
batteries. In so doing, you will help to conserve natural resources and improve
standards of environmental protection in treatment and disposal of electrical waste
(Waste Electrical and Electronic Equipment Directive).
10
This manual suits for next models
2
Table of contents
Languages:
Other LENCO Portable Radio manuals
LENCO
LENCO ODR-150 User manual
LENCO
LENCO PDR-03 User manual
LENCO
LENCO PR2700 User manual
LENCO
LENCO SCD-685BK User manual
LENCO
LENCO SCD-330 User manual
LENCO
LENCO SCD-430RD User manual
LENCO
LENCO SCR-970 User manual
LENCO
LENCO SCD-501 User manual
LENCO
LENCO IPD-5100 User manual
LENCO
LENCO SCD-38 USB User manual
LENCO
LENCO PDR-011BK User manual
LENCO
LENCO SCD-341BK User manual
LENCO
LENCO DAR-017 User manual
LENCO
LENCO PDR-045BK User manual
LENCO
LENCO SCD-580 User manual
LENCO
LENCO PDR-045 User manual
LENCO
LENCO SCD-580SI User manual
LENCO
LENCO PDR-031 User manual
LENCO
LENCO PDR-046 User manual
LENCO
LENCO PDR-045 User manual
