LENCO Xemio-668 User manual
USER’S MANUAL
Xemio-668
MP4 Media Player
1
For information and support: www.lenco.com
2
English
Xemio-668
CAUT ON:
Usage of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
PRECAUT ONS BEFORE USE
KEEP THESE NSTRUCT ONS N M ND:
. Do not use this device near water.
2. Clean only with a slightly damp cloth.
3. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”)
free space around the whole device.
4. Install in accordance with the supplied user manual.
5. * Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the
cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the
entire device out of children’s reach! When playing with the power cable, they can seriously injure
themselves.
6. * Unplug this device during lightning storms or when unused for a long period.
7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-
generating products or naked flame.
8. Avoid using the device near strong magnetic fields.
9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the
device following the instruction manual. During file transmission, please handle with care and operate
in a static-free environment.
0. Warning! Never insert an object into the product through the vents or openings. High voltage flows
through the product and inserting an object can cause electric shock and/or short circuit internal
parts. For the same reason, do not spill water or liquid on the product.
. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
2. Do not use this device when condensation may occur.
3. Although this device is manufactured with the utmost care and checked several times before leaving
the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice
smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect
the plug from the main power socket immediately.
4. This device must operate on a power source as specified on the specification label. If you are not
sure of the type of power supply used in your home, consult your dealer or local power company.
5. * The socket outlet must be installed near the equipment and must be easily accessible.
6. * Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
7. * Devices with class construction should be connected to a main socket outlet with a protective
earthed connection.
8. * Devices with class 2 construction do not require a earthed connection.
9. Keep away from rodents. Rodents enjoy biting on power cords.
3
20. * Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This
can cause a short circuit.
2 . Avoid placing the device on any surfaces that may be subject to vibrations or shocks.
22. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove
severe stains, you may use a damp cloth with dilute detergent.
23. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification
of the device or battery replacement.
24. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data
may be corrupted or lost.
25. If the unit has USB playback function, the usb memory stick should be plugged into the unit directly.
Don’t use an usb extension cable because it can cause interference resulting in failing of data.
26. The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with
liquids, such as vases, are placed on or near the apparatus.
27. * To completely disconnect the power input, the mains plug of the apparatus shall be disconnected
from the mains, as the disconnect device is the mains plug of apparatus.
28. If the unit works with battery, Battery shall not be exposed to excessive heat such as sunshine, fire or
the like.
29. Attention should be drawn to the environmental aspects of battery disposal.
30. The apparatus can only be used in moderate extremely cold or climates warm environments should
be avoided.
3 . The rating label has been marked on the bottom or back panel of the apparatus.
32. This device is not intended for use by people (including children) with physical, sensory or mental
disabilities, or a lack of experience and knowledge, unless they’re under supervision or have
received instructions about the correct use of the device by the person who is responsible for their
safety.
33. This product is intended for non professional use only and not for commercial or industrial use.
34. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an
unstable position or by failure to follow any other warning or precaution contained within this user
manual will not be covered by warranty.
35. Never remove the casing of this apparatus.
36. Never place this apparatus on other electrical equipment.
37. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust
or vibration.
38. Do not allow children access to plastic bags.
39. Only use attachments/accessories specified by the manufacturer.
40. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or
objects have fallen into the apparatus, when the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
4 . *Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric
shock.
42. Prolonged exposure to loud sounds from personal music players may lead to temporary or
permanent hearing loss.
4
NSTALLAT ON
• Unpack all parts and remove protective material.
• *Do not connect the unit to the mains before checking the mains voltage and before all other
connections have been made.
*Those instruction are related only to products using power cable or AC power adaptor.
WARN NG: When participating in the traffic listening to a personal music player can make the
listener less aware of potential dangers such as approaching cars.
WARN NG: Prolonged exposure to loud sounds from personal music players may lead to
temporary or permanent hearing loss.
1. Get to know the controls on Player
tem Description
1TFT LCD Display
2 Button (On / Off, Play / Pause)
3 Button (Previous / Fast-Rewind)
4 Button (Next / Fast-Forward)
5 M Button (Menu)
6 Button (Previous Menu / Exit)
7Micro USB Port (PC Connection / Charge)
8Microphone Position (mono, inside USB port)
9Micro SD Memory Card Slot
10 Earphone Output Jack (3.5mm Stereo)
11 Button (Volume Down)
12 Button (Volume Up)
2. nsert Micro SD Memory Card
This device is design without an internal memory; before you use it, please must insert a Micro SD
memory card into player.
Turn “Off” the play, then plug in the Micro SD memory card into player card slot;
Now you can use the player for upload / download the desired media files with your PC computer.
Or, Upload the desired media files direct to the Micro SD memory card with your computer before
insert it into player.
5
However, “Card error / no card” will display if Micro SD card is not in place or not in proper position
when you want to enter into related menu.
Note: Make sure the player power is in “Off” status when insert / remove the Micro SD memory card
from memory card slot. Otherwise, the player functional may result dead halt or the internal data / files
will be lost or damaged.
3. About Player Battery
Player has an internal, non–user-replaceable battery. For best results, the first time you use player,
let it charge for about 2 ~ 3 hours or until the battery status icon in the “Connect” screen shows that the
battery is in full.
Battery is in full
Note: Player may continue use battery power after it s been turned off. For maintain the battery life and
performance, if unit isn t used for a while, the battery need to be recharged, recharging the battery at
least once per month.
a. Charging the Battery:
You can charge the player battery in two ways:
Connect player to your computer. Or,
Use the USB power charger. (not included)
b. Connection and Charging:
Once you have connected player with computer / power charger, then you will see the “Connect”
screen appear on screen,
The level bars are running in battery status icon at the “Connect” screen. The battery is in charging.
“Connect” Screen
n Charging
Important: The battery does not charge when your computer is in sleep. The USB port on most
keyboards does not provide enough power to charge the player. Connect player to a USB 2.0 port on
your computer only to prevent charge problem.
4. Connecting and Disconnecting Player
You can connect the player with your computer to transfer those media files and recorded voice
6
memos when necessary, and to charge the battery.
a. To Connecting Player
To connect player to your computer, plug the connector of USB Cable into a USB port on your
computer, and connect the other end to player, then the “Connect” screen appear for view.
Now the player is ready for media files transfer with your computer and the battery is charging.
You can transfer the media files by using the computer mouse use drag and place, or copy and
paste, in between the player and your computer. Disconnect it when you’re done.
b. To Disconnecting Player
It’s important not to disconnect player while it’s syncing or transferring files. Eject the player before
disconnect it.
To eject player, press and hold M button for about 2 seconds, the “Connect” screen will switch to
“Main Menu” screen. And now is safe to disconnect the player with your computer. Unplug the USB
cable from the player. Or,
If you’re using a Windows PC, you can also eject player in My Computer or by clicking the “Safely
Remove Hardware” icon in the Windows system tray, select the correspondence name of USB
Device and choose “Stop” > choose “Confirm” > choose “Confirm” follow by the pop up windows
you’re your computer.
If you’re using a Mac, you can also eject player by dragging the player icon on the desktop to the
Trash.
Disconnect the USB cable from the player and computer, simply remove it.
If you accidentally disconnect player without ejecting it, reconnect it to your computer and sync again.
However, some media file may loss.
5. Getting Start the Player
Turn ON / OFF the player and use of Main Menu.
Press and hold the button for 3 seconds to turn ON, then you will see any one of the following
shown Main Menu screen, Music / Movie / Record / Voice / Photo / Setup / eBook / Game, will
appear on LCD after the Loading and Opening screen have displayed.
To OFF the player, press and hold the button for 3 seconds.
“Main Menu” screens
7
6. Use Setup Menu
You might need to set date & time or change some default setting as you desired in setup sub menu
before you start to use the player.
To go into setup menu, from main menu, choose “Setup” by use / button and then press
button, a “Setting” menu appears to use.
You can go back to previous menu by press the button during in setup menu. Or, press and hold
the button to return to main menu.
Setup Menu
(Menu Page 1) (Menu Page 2)
a. To Setup “System time” (Date & Time):
Choose “System time” by using / button and then press button, a date & time setting
screen appears to use.
Press “ ” button, the year is highlighted then adjusting to current year by pressing the /
button. And repeating the adjusting methods by “ / ” and / button again for finished
those items; Month, Date, Hour, Minute and seconds setting adjustment.
Finally, you need to press the button to confirm the adjustment and back to Setup menu, if not the
date & time will not to memorize and you need to adjust them again.
Note: the set date & time will be losses if internal rechargeable battery is fully emptied in protection mode.
Adjust the clock again if you want it to use.
b. To change “LCD set”
You can set the backlight to illuminate the screen for a certain amount of time as you desired or
make the backlight to always ON when every time you turn ON the player.
To change LCD backlight, choose “LCD set” > choose “Dark mode”, a level bar with number
appear then chose “0 (always On) / 5 / 0 / 5 / 20 / 25 / 30 / 35 / 40 / 45 / 50 seconds” as you
desired by using and / buttons. Choose “0” to prevent the LCD backlight from turning to
off. (choosing this option decrease battery performance)
8
c. To Change “Language”
This player can use difference OSD languages.
To set the language, choose “Language”, and then choose which language as you desired by using
and / buttons.
d. To Set “Power Off”
The Power Off setting can extend the time between battery charges by turning OFF the player when
you are not using the controls or no operation. Also, Sleep function provided for more choice.
To set power off time, choose “Power off”, then choose “Off time”, a levels bar with number menu
appear, then choose “0 - 200 seconds” as you want by using and / buttons.
To set sleep time, choose “Power off”, then choose “Sleep time”, a levels bar with number menu
appear, choose “0 / 0 / 20 /30 / 40 / 50 / 60 / 70 / 80 / 90 / 00 / 0 / 20 minutes” as you want by
using and / buttons.
e. To View “Memory info”
You can view about the memory status of Micro SD card, such as the numbers of remaining memory
space available and the percentage of memory have used.
To view the status, choose “Memory info” by using and / buttons. An information screen,
remaining memory space available and percentage of memory used, appear for view.
To return to setup menu or main menu press button or press and hold button.
f. To View “Firmware Version”
You might need to view the details about firmware information inside the Player.
Choose “Firmware version” by using and / buttons, an information screen appear for
view.
To return to setup menu or main menu, press button or press and hold button.
g. To “Exit”
Select Exit to back to main menu. Or, press and hold the button to go back main menu.
7. Use Music Menu
You can use music player to playback with supported music file format of audio coding; WMA and
MP3 are supported by the player. To open the music player in Main Menu:
From main menu, choose “Music” by using / and button, a “Music Now Playing” screen
appears to use.
“Music Now Playing” Screen
a. To Play / Pause Music
In Music Now Playing screen, press button to start the play.
Press button to pause the playing music.
Press it again to resume.
9
b. Play Previous or Next Music
Press button to play next music.
Press button to play previous music.
c. Use Fast-Forward or Fast-Backward
Press and hold button to use fast-forward
Press and hold button to use fast-backward.
d. Adjust volume level
In music playing, press / buttons to adjust volume levels to Up / Down.
Wait for 6 – 8 seconds or press button to return to music now playing screen.
For hearing protection; A display warning pop-up on TFT screen, when every time you increase the
volume level and reach to the default setting level which may exceed 85db. Press M button to accept the
warning and press Button to increase the volume level.
e. Use Lyric Display
This player supports “*.LRC” lyric files and lyrics can synchronous displayed while playing music if
you music has lyric included. How to know whether the lyrics exist? If the current song has matching lyric
files, the color dot beside the Lyric Message icon will be turned to green color from red in
Music Now Playing screen.
Make sure the music file name and “*.LRC” file name must be same and upload into player together.
Playing the music with lyrics, and then press and hold M button to enter the lyric display mode and
the lyrics is displaying and moving up accordingly with the playing music.
Press M button to cancel the lyrics display and go back to Music Now Play screen if you want.
8. Use Music Submenu in Music Stop Mode
You might need to selecting folders for music play and delete music files. To do this:
In Music Now Playing screen, press the button to stop the playing music if player is in playing.
Then,
Press the M button to pop-up the Music Submenu;
a. Card Folder
In Music Submenu screen, choose “Card folder” a list menu appear, and then select folder and / or
choose a music file by using / and button.
It will go back to music now playing screen once a music file is selected. Then press button to
play.
b. Artists
Choose “Artists” to enter folder(s) list menu grouping by Artist name, then choose who name of
Artist folder > choose a song file in list where start the play.
c. Album
Choose “Album” to enter folder(s) list menu grouping by Album name, then choose who name of
Album folder > choose a song file in list where start the play.
d. Genre
Choose “Genre” to enter folder(s) list menu grouping by Genres name, then choose who name of
Genres folder > choose a song file in list where start the play.
e. Update playlist
Choose “Update playlist” to update the playlist when you found it show incorrect; actually, it is
10
Other manuals for Xemio-668
3
Table of contents
Other LENCO Media Player manuals
LENCO
LENCO XEMIO-3530 User manual
LENCO
LENCO Xemio-6531 User manual
LENCO
LENCO Xemio-668 User manual
LENCO
LENCO Xemio-657 User manual
LENCO
LENCO Xemio-280 User manual
LENCO
LENCO XEMIO-1020 User manual
LENCO
LENCO Xemio-657 User manual
LENCO
LENCO MMC-2900 User manual
LENCO
LENCO Xemio-860 User manual
LENCO
LENCO PODO-152 User manual
LENCO
LENCO APD-100 User manual
LENCO
LENCO DVP-931 User manual
LENCO
LENCO XEMIO-866 User manual
LENCO
LENCO XEMIO-950 User manual
LENCO
LENCO XEMIO-965 - V1.0 User manual
LENCO
LENCO Xemio-658 UK User manual
LENCO
LENCO XEMIO-950 User manual
LENCO
LENCO Xemio-760BT User manual
LENCO
LENCO PO DO-153 User manual
LENCO
LENCO IR-2002 User manual
