LENCO CR-335 User manual
Radio Controlled Clock with FM Radio
CR-335
For information and support www.lenco.eu
2
Table of content
Warning ....……………………………………………………………………..3
Important Safety Instructions.............................................……………… 3
Features........................………………………………………………………5
Installation ....................................................………………………………6
Description of Parts ................……………………………………………... 7
Radio Tuner Operation .........................…………………………………… 9
Listening to External Audio Source...........................…………………….10
Clock Setting................................................................………………….10
Alarm Operation.............................................….…………………………11
Sleep Timer Function............................................................……..…….14
Wave Sensing Function and LED Display ………………………………..15
Care and Maintenance..................……………………………………….. 15
Specifications............................................………………………………. 17
3
Warning
* See Rear of the Unit
WARNING :
To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquid such as vases, shall be placed on the apparatus.
Important Safety Instructions
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. However, improper use
can result in potential electrical shock or fire hazards. Please read all
safety and operating instructions carefully before installation and use,
and keep these instructions handy for future reference. Take special note
of all warnings listed in these instructions and on the unit.
1. Water and Moisture
The unit should not be used near water. For example: near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool or in a set
basement.
2. Ventilation
The unit should be situated so that its location or position does not
interfere with its proper ventilation. For example, it should not be
situated on a bed, sofa, rug or similar surface that may block the
4
ventilation openings. The ventilation should not be impeded by
covering the ventilation openings with items, such as newspapers,
table-cloths, curtains, etc. Also, it should not be placed in a built-in
installation, such as a bookcase or cabinet, which may impede the flow
of air through the ventilation openings.
3. Heat & Flame
The unit should be situated away from heat sources such as radiators,
heat registers, stoves or other appliances (including amplifiers) that
produce heat.
No naked flame sources, such as lighted candles, should be placed on
the apparatus.
4. Power Source
The unit should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
Where the power cord is used as the disconnect device, the
disconnect device shall remain readily operable.
5. Power Cord Protection
Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them. It is
always best to have a clear area from where the cord exits the unit to
where it is plugged into an AC outlet.
6. Cleaning
The unit should be cleaned only as recommended. See the section
"Care and Maintenance" of this manual for cleaning instructions.
7. Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not
spilled into any openings or vents located on the product. It shall not be
exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
8. Attachments
Do not use attachments not recommended by the product
manufacturer.
9. Lightning and Power Surge Protection
Unplug the unit from the wall outlet and disconnect the periods of time.
This will prevent damage to the product due to lightning and power-line
surges.
10.Overloading
Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire of electric shock.
11. Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A. The power supply cord or plug has been damaged.
5
B. Objects have fallen into or liquid has been spilled into the enclosure.
C. The unit has been exposed to rain.
D. The unit has been dropped or the enclosure damaged.
E. The unit exhibits a marked change in performance or does not
operate normally.
12. Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a
month or longer, the power cord should be unplugged from the unit to
prevent damage or corrosion.
13. Servicing
The user should not attempt to service the unit beyond those methods
described in the user's operating instructions. Service methods not
covered in the operating instructions should be referred to qualified
service personnel.
Features
Thank you for purchasing the Radio Controlled Clock Radio.
This model incorporates following features:
zFM Tuner
zRCC clock (Radio Controlled Clock)
zDaylight Savings Time setting
zDual Alarm timer function
zWake up to Alarm (Buzzer) or Radio with Snooze function
zWave sensing to activate snooze timer
zSleep timer function
zLED display
zAudio line-in (AUX-IN) for connecting other digital audio player
zBuilt-in High Fidelity Speaker
6
Installation
Clock setting battery back-up
A backup battery compartment located at bottom of the unit.
(1) Open the battery compartment lid.
(2) For clock setting backup, follow the polarity diagram shown inside
the compartment and install
2 x AAA (UM-4) batteries (purchase separately).
(3) Close the battery compartment lid.
Warnings:
- Batteries shall not be exposed to excessive heat such as sunshine,
fire or the like.
- Be sure that the batteries are installed correctly. Wrong polarity may
damage the unit.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-
cadmium) batteries.
- Only batteries of the same or equivalent type as recommend are to
be used.
- If the unit is not to be used for an extended period of time, remove
the battery.
- Do not dispose of batteries in fire, battery may explode or leak.
- Danger of explosion if battery is incorrectly replaced.
AC Power Connection
CAUTION: Before operate the unit; check the ac voltage marked at
the rating plate located on the unit which matches the power system
of your area.
Connect the AC power plug into your household AC power outlet.
7
Description of Parts
Main Unit
Top View
Front View
12
911
10
34
5678
13 1
8
16
15
17
21
20
19
22
2324
14 1
8
Rear View
Description of Parts
Main Unit
1. POWER button ----- To turn the unit on and off
2. WAVE SENSOR ON/OFF button ----- To enable / disable Snooze
To enable / disable wave triggering of “the LED display bright for
few seconds” function.
3. TIME SET button ----- Set 12/24 hour format, clock, year and date
4. ALM2 SET button ---- Set Alarm 2 alarm time
5. ALM1 SET button ---- Set Alarm 1 alarm time
6. TIME ZONE button ----- Select daylight savings time (DST)
7. MM/DD/YY button ----- Press to view month, date and year
8. SLEEP button ---- Select the time duration of the sleep timer
9. + button ---- In setting mode: press to advance setting value
10. - button ---- In setting mode: press to decrease setting value
11. SNOOZE button ----- Activate the snooze function
262729 28
25
9
12. WAVE Sensor
13. LED Display
14. PM LED indicator ----- In 12 hours display format mode: LED on for
pm, LED off for am
15. Radio mode LED Indicator
16. ALM 1 switch ---- Select alarm source or disable alarm 1
17. ALM 2 switch ---- Select alarm source or disable alarm 2
18. ALARM 1 LED indicator
19. ALARM 2 LED indicator
20. AUX (auxiliary) mode LED indicator
21. VOLUME wheel ----- Adjust volume level
22. TUNING wheel ---- Tuning FM radio frequency
23. FM frequency dial scale
24. Clock backup battery compartment ---- Located at bottom of the unit
25. Speaker
26. AC Power Cord
27. FM Antenna wire
28. RESET button ---- For resetting the unit
29. AUX-IN jack ---- Auxiliary audio signal input
Radio Tuner Operation
FM Antenna
Fully extend the FM antenna wire for the best FM radio reception.
Radio Tuning
1. Press the POWER button to turn on the unit, where the Radio mode
LED indicator light on.
Note: When a 3.5mm auxiliary plug is inserted in the AUX-IN jack,
the unit will be at auxiliary mode and the AUX LED indicator lights
on. If it is the case, unplug the auxiliary plug at rear of the unit and
the Radio mode LED indicator lights on again.
2. Turn the TUNING wheel tuning to a desired radio station.
3. Turn the VOLUME wheel to adjust the volume to a desired level.
10
Listening to an External Audio Source
1. Connect an audio cable (not included) with 3.5mm stereo plug from
an auxiliary audio device to the AUX-IN jack of the unit.
2. Press the POWER button to turn on the unit and the AUX LED
indicator lights on.
3. Turn on the external auxiliary audio device.
4. The volume level can now be controlled through the unit.
5. Operate all other functions on the external device as usual.
Notes: Press the POWER button to turn off the unit when you finish
listening.
Don't forget to switch off the power of the external audio device as
well.
Clock Setting
When the unit is OFF (power off mode):
Set 12/24 Hour format
1. Press the TIME SET button entering 12/24 hour format setting
mode.
2. Press the +/- button to select 12 or 24 hour display format.
Set Clock
3. Press the TIME SET button again and the clock Hour digits blink.
4. Press the +/- button to set hour.
5. Press the TIME SET button and the clock Minute digits blink.
6. Press the +/- button to set minute.
Set Year
7. Press the TIME SET button and the Year digits blink.
8. Press the +/- button to set year.
Set Month and Date
9. Press the TIME SET button and the Month digit blinks.
10. Press the +/- button to set month.
11. Press the TIME SET button and the Date digits blink.
12. Press the +/- button to set date.
Table of contents
Languages:
Other LENCO Clock Radio manuals
