Leica 3D Disto User manual

Leica 3D Disto

User Manual

Version 3.0

English

3D Disto, Introduction

Introduction

Purchase Congratulations on the purchase of a Leica 3D Disto.

This manual contains important safety directions as well as instructions for setting

up the product and operating it. Refer to "12 Safety Directions" for further informa-

tion.

Read through the User Manual carefully before you switch on the product.

Product

identification

The serial number of your product is indicated on the data label, refer to "12.8 FCC

Statement, Applicable in U.S.". Enter the serial number in your manual and always

refer to this information when you contact your authorised dealer or to register in

the Leica myWorld portal.

Serial number: _______________

3D Disto, Introduction 3

Symbols The symbols used in this manual have the following meanings:

Trademarks • Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the property of their respective owners.

Type Description

Danger Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

Warning Indicates a potentially hazardous situation or an unintended

use which, if not avoided, could result in death or serious

injury.

Caution Indicates a potentially hazardous situation or an unintended

use which, if not avoided, may result in minor or moderate

injury and/or appreciable material, financial and environ-

mental damage.

Important paragraphs which must be adhered to in practice

as they enable the product to be used in a technically

correct and efficient manner.

3D Disto, Table of Contents

Table of Contents

In this manual Chapter Page

1 How to Use this Manual 10

2 Technical Terms and Abbreviations 14

3 Description of the System 27

3.1 General 3D Disto System Information 27

3.2 Container Contents 28

3.3 Instrument Components 30

3.3.1 3D Disto 30

3.3.2 Control Unit 34

3.3.3 RM100 Remote Control 35

3.4 Power Supply 36

3.4.1 3D Disto 36

3.4.2 Control Unit 37

3.4.3 RM100 Remote Control 39

3.5 Software Concept 40

3D Disto, Table of Contents 5

4 User Interface 47

4.1 Control Unit 47

4.1.1 Screen 48

4.1.2 Main Operation Bar 51

4.1.3 Toolbar 52

4.1.4 Icons & Symbols 53

4.2 RM100 Remote Control 57

5 Instrument Setup 58

5.1 Start-up Procedure 58

5.2 Assistant 65

5.3 Device Configuration and Menu Settings 67

5.4 Data Management 71

5.4.1 General 71

5.4.2 File Manager 73

5.4.3 Photo and Secure Points Administration 74

5.4.4 Data Transfer 76

5.4.5 Exported files 82

5.5 Calculator 83

3D Disto, Table of Contents

6 Operation 85

6.1 Measurements 85

6.2 Viewfinder 86

6.3 Measurement Workflow 91

6.4 Touch Screen in Sketch Area 97

6.5 Addition and Subtraction 99

6.6 Area & Volume Calculations 102

6.6.1 Horizontal Areas/Volumes 103

6.6.2 Tilted Areas 105

3D Disto, Table of Contents 7

7 Software Applications 106

7.1 Overview 106

7.2 Tool Kit 107

7.2.1 Comfort Plumbing 108

7.2.2 Comfort Targeting 110

7.2.3 Comfort Level 112

7.2.4 Metre Mark 114

7.2.5 Height Tracking 116

7.2.6 Parallel Line 118

7.3 Location 120

7.4 Room Scan 126

7.4.1 Manual Measurement 128

7.4.2 Unfold Mode 130

7.4.3 CAD tools 132

7.4.4 Automated Scans 149

7.5 Projector 159

7.5.1 Workflow 160

7.5.2 Targeting and Layout with RM100 Remote Control 167

8 Error Messages 168

3D Disto, Table of Contents

9 Check & Adjust 171

9.1 Overview 171

9.2 Crosshairs Offset 173

9.3 V-Index Error 175

9.4 Tilt Sensor Calibration 177

9.5 Reset to Factory Settings 179

10 Instrument Protection (Theft Protection) 180

11 Care and Transport 182

11.1 Transport 182

11.2 Storage 183

11.3 Cleaning and Drying 184

12 Safety Directions 185

12.1 General 185

12.2 Intended Use 186

12.3 Limits of Use 188

12.4 Responsibilities 189

12.5 Hazards of Use 190

12.6 Laser Classification 194

12.7 Electromagnetic Compatibility EMC 196

12.8 FCC Statement, Applicable in U.S. 199

12.9 Conformity to National Regulations 203

3D Disto, Table of Contents 9

13 Technical Data 205

14 International Limited Warranty, Software License Agreement 210

Index 213

3D Disto, How to Use this Manual 10

1 How to Use this Manual

It is recommended to set up the instrument while reading through this manual.

Index The index is at the back of the manual.

Keys, fields and options on the screens which are considered self-explanatory are not

explained.

Validity of this

manual

This manual applies to the 3D Disto instruments and software application.

Other manuals for 3D Disto

Table of contents

Popular Laser Level manuals by other brands

Nedo

Nedo ET-5 operating instructions

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP user manual

LaserLiner

LaserLiner X2-Laser manual

Spectra

Spectra LL300N manual

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP user manual

Nedo

Nedo Crossliner 4 operating instructions

Lasertec

Lasertec FX360G instruction manual

Flex

Flex ALC 8 Original operating instructions

Black & Decker

Black & Decker LZR5 user manual

Johnson

Johnson 40-6692 instruction manual

Cocraft

Cocraft HL 20-SG Original instructions

Zircon

Zircon iLine instructions

HWH

HWH 310 SERIES Operator's manual

LaserLiner

LaserLiner SuperCross-Laser SCL 2 operating instructions

LaserLiner

LaserLiner ActiveFinder XP user manual

DeWalt

DeWalt DW082 Original instructions

imex

imex EL20 manual

Fixturlaser

Fixturlaser NXA D I-0912 user manual