Larson Electronics EPL-HB-3X150LED-RT User manual

EPL-HB-3X150LED-RT

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

1of 2

Class 1 Division 1 Explosion Proof 450 Watt High Bay LED Light

Fixture - Paint Spray Booth Approved

Instruction Manual

This explosion proof light is designed for illumination of industrial locations. It uses the latest in

solid state lighting technology for long life, low maintenance and high efficiency.

The unique design focuses the light where it is needed, giving improved efficiency over a

conventional HID luminaire.

An internal, universal input, power-factor-corrected switch-mode supply allows it to be used from any

nominal 100-277V AC 50/60 Hz power supply without any variation in light output.

WARNING

To avoid the risk of fire, explosion or electric shock, this product should be installed, inspected

and maintained by a qualified electrician only, in accordance with all applicable electrical codes.

To avoid electric shock:

•Be certain electrical power is OFF before and during installation and maintenance.

•Luminaire must be connected to a wiring system with an equipment-grounding conductor.

To avoid explosion:

•Make sure the supply voltage is within the luminaires’ voltage rating.

•Ensure the marked T rating is less than the ignition temperature of the Hazardous

Atmosphere.

•Do not operate in ambient temperatures above those indicated on the luminaire nameplate.

•Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

For supplyconnections, use wire rated for at least 110°

C Recommendedmounting height is 15-25 feet.

MOUNTING

This fixture offers an adjustable mounting system that allows it to be mounted to any

flat surface including walls and ceilings. Three heavy duty bolts are used to mount the fixture to the

surface through predrilled holes on mount. Hole diameter is .563”. Fixture is heavy - two people and

capable equipment are required for hanging fixture.

Fixture angle can be adjusted by loosening the set screws on either side of mount. Swap outer bolts

to move mount in opposite direction. Keep center bolt in place! Otherwise fixture will free from mount.

Use appropriate wiring methods for the area following all NEC, local, and state electrical codes.

Conduit attaches to the junction box on the back for wiring.

ADJUSTMENT BOLTs

CENTER BOLT

DO NOT REMOVE COMPLETELY

WHILE MOUNTED TO SURFACE

EPL-HB-3X150LED-RT

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

2of 2

WIRING (see attached wiring diagram)

This unit comes preconfigured in selected Voltage and Beam Spread. Wire light via junction box on

the back to the correct voltage. Follow applicable local and/or National Electrical Code for the

hazardous area. Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC based on model.

MAINTENANCE

Caution: To avoid personal injury, disconnect power to the light and allow the unit to cool

down before performing maintenance.

Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens

will void the warranty.

1. Perform visual, mechanical and electrical inspections on a regular basis. We recommend

routine checks to be made on a yearly basis. Frequency of use and environment should

determine this. It is recommended to follow an Electrical Preventive Maintenance Program

as described in NFPA 70B: Recommended practice for Electrical Equipment.

2. The lens should be cleaned periodically as needed to ensure continued photometric

performance. Clean the lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use

mild soap or a liquid cleaner.

3. Inspect the cooking fins on the luminaire to ensure that they are free of any obstructions

or contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if

needed.

4. Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

WARRANTY

Should further information not covered by these instructions be required, please contact Larson Electronics at

1-800-369-6671 or sales@larsonelectronics.com for further assistance.

Please visit LarsonElectronics.com for Warranty and Return information.

WARNING: CHECK NAMEPLATE

FOR PROPER VOLTAGE. DAMAGE

FROM IMPROPER VOLTAGE WILL

VOID WARRANTY.

Table of contents

Other Larson Electronics Light Fixture manuals

Larson Electronics

Larson Electronics HAL-RSLED-240W User manual

Larson Electronics

Larson Electronics IND-AHF-BX-UVC-R2-120V-15C User manual

Larson Electronics

Larson Electronics ATEX-EHL-1123-LED-50-EPP User manual

Larson Electronics

Larson Electronics EPLC-48-432 User manual

Larson Electronics

Larson Electronics CL1B-SS-PM-1227 User manual

Larson Electronics

Larson Electronics EPL-LP-12-LED-SFC.LP User manual

Larson Electronics

Larson Electronics EPLC2-BS-70LED-100 Manual

Larson Electronics

Larson Electronics GVP-48-2L-LED-125VDC User manual

Larson Electronics

Larson Electronics HALP-96-2L-LED User manual

Larson Electronics

Larson Electronics GAU-WP-500LTL-LED-WG-DNMS User manual

Larson Electronics

Larson Electronics EPL-LP-48W-LED Manual

Larson Electronics

Larson Electronics EPLC2-LED-400W User manual

Larson Electronics

Larson Electronics GVP-48-2L-LED-G3 User manual

Larson Electronics

Larson Electronics EPL-AMB-150LED-250 User manual

Larson Electronics

Larson Electronics EPLC2-AMB-70LED-50 Manual

Larson Electronics

Larson Electronics HAL-PT-LED-CPR-C-100 User manual

Larson Electronics

Larson Electronics EPL-HB-5K-LED User manual

Larson Electronics

Larson Electronics RCL360-LED-40 User manual

Larson Electronics

Larson Electronics HALD-24-1X100LED-DIMM User manual

Larson Electronics

Larson Electronics Golight User manual

Larson Electronics

Larson Electronics LED25WRE-LENSCOVER User manual

Larson Electronics

Larson Electronics EPL-WPLED-100W-RT User manual

Larson Electronics

Larson Electronics EPL-QP-1X150-100 User manual

Larson Electronics

Larson Electronics EPL-PM-1X30LED-120XLV-100 Manual

Popular Light Fixture manuals by other brands

Emos

Emos CLASSIC ZY1431T manual

Westinghouse

Westinghouse Outdoor Lighting Fixture owner's manual

Hedler

Hedler C 12 silent Operation manual

Blizzard Lighting

Blizzard Lighting Puck: CSI manual 

Energetic Lighting

Energetic Lighting ELYSL-5004 Series installation instructions

Lightmaxx

Lightmaxx Shaft 5R user manual

Triarch

Triarch 31083 Assembly instructions

Philips

Philips 32614 Series user manual

IKEA

IKEA TIVED Assembly instructions

Lightolier

Lightolier LP200 specification

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH user manual

Martin

Martin MAC 250 Krypton user manual

Cooper Lighting

Cooper Lighting Halo L3232E Specification sheet

Stageline

Stageline ODW-2410RGBW instruction manual

Light Sky

Light Sky Tornado Series user manual

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U specification

Lightolier

Lightolier Lytespan 83ED17S specification

Lightolier

Lightolier Calculite CS8226 specification