Lark SP-220 User manual
EN User manual 1
PL Instrukcja szybki start 24
CS Návod k obsluze 48
SK Návod na použitie 71
HU Kezelési útmutató 94
SP-220
1ENGLISH
The symbol to the left means that according to European Union
laws and regulations your product and/or its battery shall be dispo-
sed of separately from household waste. When this product reaches
its end of life, take it to a collection point designated by local
authorities. The separate collection and recycling of your product
and/or its battery at thetime of disposal will help conserve natural
resources and ensure that it is recycled in a manner that protects
human health and the environment.
Thank you for selecting our mobile
phone.
We highly recommend reading this manual before
you start using the device. Please, keep this
manual for future reference. Defects caused by
improper usage are not covered by the manufac-
turer’s warranty, hence we do ask you to follow the
instructions included in this booklet.
This user guide will provide you with the general
information and operation instructions.
• Use only accessories approved by the phone
manufacturer to ensure safety. Failing to comply
with this will violate the terms and conditions of
the warranty.
• If the contents and displays described in this
user guide do not match the actual operation of
the phone set, please use the display of the ac-
tual phone set. We reserved the rights to change
the mechanisms of the phone without notice.
2ENGLISH
Security
Emergency call
In any country, you can dial 112 for emergency
help.
Note:
Based on the nature of cellular networking, the success of the emergency call
cannot be guaranteed.
Safety Precautions
Before using your phone, please read the following
important information to eliminate or reduce any
possibility causing damage and personal injury.
• Do not use wireless phones while driving.
• Switch o wireless devices in aircraft.
• Do not use mobile phones at refueling point.
Don’t use near fuel or chemicals.
• Follow regulations or rules in hospital and health
c a r e f a c i l i t i e s . S w i t c h p h o n e o .
• Only qualied service personnel can install or
repair this device.
• Use only approved accessories and batteries.
Do not expose your phone to extreme high
temperatures
above +60°C (+140 F).
3ENGLISH
Battery Information
Information Charging and Discharging
• The charger is designed to be used in tempera-
tures between
0 to 40°C.
• Do not charge the phone in wet and damp condi
tions.
• We strive to produce products in compliance
with global environmental standards.
• When a charger is not in use, disconnect it from
the power source. Do not leave the battery con-
nected a charger for longer than
12 hours, since overcharging may shorten its
life.
Tips for Battery
• Do not disassemble or modify the battery by
yourself.
• Do not short-circuit the battery.
• D o n o t d i s p o s e o f b a t t e r i e s i n r e .
• If you smell anything strange from the battery or
nd that the battery is overheated, you should
stop using it immediately and contact the autho-
rized Service Center in your region.
4ENGLISH
Getting Started
Installing and uninstalling SIM card
Switch o the phone; remove the back cover, bat-
tery and other external power source. Fit the SIM
card into the SIM card slot.
Charging the battery
Plug the charger into the socket on the side of your
phone. Connect the charger to an AC wall socket.
The blinking of the battery level icon indicates
the battery is being charged. When the blinking
stops, it indicates the charging is nished.During
charging, the phone and charger will feel warm to
the touch. This is normal.
Warning:
The operating ambient temperature of the charger is 0°C-50°C.
Do not use it when the temperature exceeds this limit.
Use only chargers approved by the phone manufacturer to ensure safety.
Failing to comply with this will violate the terms and conditions of the warranty.
Connecting to the Network
SIM card
Please insert available Subscriber Identity Module
(SIM) card into your phone before using it. SIM
card is supplied by your network carrier. All the
information related to network connection is recor-
ded on the SIM card, so are the contact informa-
tion such as names, phone numbers and SMS that
5ENGLISH
you set to store on the SIM. You can take out the
SIM card from the phone and insert it into another
GSM phone to use it. Most new phones will reco-
gnize the SIM card automatically.
Connecting to the network
After the SIM card is unlocked, you phone will
automatically search for the registered network or
other local available network. Once connected, the
name of the network carrier will appear on the top
of the screen.
You phone is now in Standby mode, ready for
making and receiving call.
6ENGLISH
Your phone
Standby mode, the function of shortcut
keys
Up navigation key: direct access to Shortcuts,
you can set its function as following: select
Menu→Settings →Phone settings→ Dedicated
keys→Up, then press the left navigation key to
edit interface to chose the function you want , then
press OK.
Down navigation key: direct access to Calcu-
lator, you can set its function as following: select
Menu→Settings →Phone settings→ Dedicated
keys→Down, then press the left navigation key to
edit interface to chose the function you want, then
press OK.
# key: Long press changing the proles.
0 key: Long press 3 seconds into the SOS mode.
1. Phonebook
The phone oers two memory banks: the SIM card
and mobile phone, the phone’s storage capacity is
150, the storage capacity of the SIM card is decid-
ed by the type of SIM card.
• Enter a number in the standby mode, press the
left key to enter the edit save the interface.
• If you saved to the SIM card, the user can edit
the name, telephone number. If you are saved to
7ENGLISH
the „mobile phone”, the user can edit the name,
telephone number.
1.1 Contacts
Select any record in the phone book list will have
the following options:
• You can press the answer key to call this num-
ber
• View: View detailed information on the record.
• Add new contact: add a new record to Phone
or SIM card, the user can edit the name and
telephone number.
• Send text message: send a message to the
record..
• Edit: Edit the record.
• Delete: delete the record.
• Copy: copy in the same or a dierent memory
and the option to save to the le management.
• Move: move to Phone or SIM card memory.
• Add to Speed Dial:add the number to speed dial
list.
1.2 Add new contact
Add a new record to Phone or SIM card, the user
can edit the name and telephone number.
1.3 Speed dial
The user can chose the Status on or o and in Set
8ENGLISH
numbers user can edit the speed dial number list,
the number can add from the phonebook records
or direct insert a new telephone number.
1.4 Phonebook settings
It will have the following options after entering:
• Delete all contacts:Delete all contacts from the
SIM card or phone:
• Copy contacts:Copy all contacts from the SIM
card or phone.
• Move contacts:Move all contacts from the SIM
card or phone.
• Memory status: The mobile phone store state.
2. Messaging
The phone supports the sending messages
(referred to as SMS). The message is rst sent to
the network SMS center, and then network to the
destination user again to send. If the destination
user is not on, or can not receive, the network will
temporarily save this messages, retention period
is the decision by sending the user’s settings and
service operators.
If the text messages is not full, it is directly stored
in the SIM card or phone (user settings). If the text
messages capacity is full, you can not receive new
messages, the top there will be a blinking icon in
the main screen, and prompts the SMS storage is
full, delete some text messages, inbox free space,
the phone can continue to receive new SMS.
9ENGLISH
2.1 Write Message
In the standby screen, select Menu →message
→ write message .to enter the edit SMS interface,
the following: text editing, press the left soft key
„Options”, you can choose to send, save, using
a template, edit, language, Association options.
If you want to delete the contents written by the
navigation key to move the cursor to delete the
contents of the back, and then press the power
button to clear, long press the right soft key to
delete all content. When nished, send a message,
press the left soft key „OK”.
Send to: sending a number of interface, direct en-
ter the number you want to send from contacts, call
history, add a number. Selection is complete, press
the left soft key „OK” to send a message. Select a
recipient the option to do the following:
• Send: send a message to the corresponding
recipient.
• Edit recipient: you can edit the recipient’s
number.
• Remove recipient: delete the recipient.
• Remove all recipients:delete all the recipients.
• Save:save the message to Drafts.
• Input method: set the language need to edit.
• Advanced:you can chose Insert number or name
Table of contents
Languages:
Other Lark Cell Phone manuals
