Landoll 334C User manual

MODEL 334C

CAR CARRIER

OPERATOR’S MANUAL

1900 NORTH STREET

MARYSVILLE, KANSAS 66508

(785) 562-5381

F-274-1299 12/99

WARRANTY

MANUFACTURER’S GUARANTEE POLICY

LANDOLL CORPORATION WARRANTY

LANDOLL warrants each new and unused LANDOLL machine, when properly

assembled, adjusted, and operated, to be free of defects in material and work-

manship, in normal use and when properly serviced, for a period of twelve

(12) months after date of delivery by the Dealer to the original retail purchaser.

LANDOLL shall repair or replace, at its option, freight on board (f.o.b.) at its

factory or designated DEALER location, any part or parts of such new and un-

used machine which shall have been reported in writing to LANDOLL within

thirty (30) days from date of failure thereof and which LANDOLL inspection

shall disclose to have been defective. Defective parts must be returned to the

LANDOLL factory, freight prepaid. LANDOLL will not be liable for labor, trans-

portation, or any other charges resulting from replacement of a defective part.

This warranty is void if any part not supplied by LANDOLL is used in assem-

bly or repair, or if the machine has been altered, abused, or neglected. LAN-

DOLL repair parts are warranted for ninety (90) days from date of replacement

or for the unexpired warranty period of the applicable LANDOLL machine,

whichever period is longer. LANDOLL makes no warranty, whatsoever, as to

purchased component parts and other trade accessories, except to the extent

that such items are warranted by the manufacturer thereof. THIS WARRANTY

IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EX-

PRESSED, IMPLIED, OR STATUTORY (INCLUDING WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR PURPOSE), AND LANDOLL SHALL NOT

BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND ON

ACCOUNT OF ANY LANDOLL PRODUCT.

NO EMPLOYEE OR REPRESENTATIVE IS AUTHORIZED TO CHANGE THIS

WARRANTY, VERBALLY OR IN WRITING, OR GRANT ANY OTHER WAR-

RANTY.

LANDOLL CORPORATION, WHOSE POLICY IS ONE OF CONTINUOUS IM-

PROVEMENT, RESERVES THE RIGHT TO MAKE CHANGES WITHOUT OBLI-

GATION TO MODIFY PREVIOUSLY PRODUCED EQUIPMENT.

MODEL 334C

CAR CARRIER

OPERATOR’S MANUAL

PURCHASED FROM: DATE / /

ADDRESS:

PHONE NO.: SERIAL NO.:

REPORTING SAFETY DEFECTS

If you believe that your vehicle has a defect which could cause a crash or could

cause injury or death, you should immediately inform the National Highway Traffic

Safety Administration (NHTSA) in addition to notifying Landoll Manufacturing.

If NHTSA receives similar complaints, it may open an investigation, and if it

finds that a safety defect exists in a group of vehicles, it may order a recall and

remedy campaign. However, NHTSA cannot become involved in individual prob-

lems between you, your dealer, or Landoll Manufacturing.

To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1-800-

424-9393 (or 366-0123 in Washington, D.C. area) or write to: NHTSA, U.S. Depart-

ment of Transportation, Washington, D.C. 20590. You can also obtain other infor-

mation about motor vehicle safety from the Hotline.

In the event of a defect or problem with your LANDOLL equipment, please notify

LANDOLL CORPORATION:

LANDOLL CORPORATION

SALES AND SERVICE

1900 NORTH STREET

MARYSVILLE, KANSAS 66508

OR PHONE:

1-800-HAULOLL

(1-800-428-5655)

FAX NO.: (785)562-3240

FOR REPLACEMENT PARTS:

(785)562-4650

1-800-423-4320

FAX NO.: (785) 562-4654

TABLE OF CONTENTS

SECTION DESCRIPTION PAGE NO.

1 INTRODUCTION

2 STANDARD SPECIFICATIONS

3 OPERATING INSTRUCTIONS

3-1 GENERAL ...........................................3-1

3-2 PRE-COUPLING OF SEMITRAILER AND TRACTOR ...........3-2

3-3 COUPLING OF THE TRACTOR TO THE SEMITRAILER .........3-3

3-4 CONNECTING TRACTOR SERVICES TO THE SEMITRAILER ....3-3

3-5 TRACTOR AND SEMITRAILER CHECK-OUT .................3-4

3-6 TOWING THE SEMITRAILER .............................3-5

3-7 PARKING THE SEMITRAILER ............................3-6

3-8 UNCOUPLING TRACTOR FROM SEMITRAILER...............3-6

3-9 HYDRAULIC AND AIR LOCK CONTROLS ...................3-7

3-10 WINCH CONTROLS ....................................3-8

3-11 REMOTE CONTROL OPERATION .........................3-9

3-12 ADJUSTING ADJUSTMENT ARMS........................3-10

3-13 PREPARATION FOR LOADING PROCEDURE ...............3-11

3-14 LOADING THE 331 OVER-THE-CAB DECK .................3-13

3-15 LOADING THE UPPER DECK ...........................3-14

3-16 LOADING THE LOWER DECK ...........................3-15

3-17 SECURING THE LOAD.................................3-17

3-18 UNLOADING THE LOWER DECK.........................3-18

3-19 UNLOADING THE UPPER DECK .........................3-18

3-20 UNLOADING THE 331 OVER-THE-CAB DECK ...............3-19

3-21 REAR IMPACT GUARD SYSTEM .........................3-19

3-22 ANTI-LOCK BRAKE SYSTEM (ABS) ......................3-21

3-23 COLD WEATHER OPERATION ..........................3-22

3-24 HOT WEATHER OPERATION............................3-22

4 MAINTENANCE AND LUBRICATION

4-1 MAINTENANCE SCHEDULE .............................4-1

4-2 MAINTENANCE PROCEDURES ...........................4-4

4-3 FRAME AND DECK ....................................4-5

4-4 HYDRAULIC SYSTEM ..................................4-5

4-5 ELECTRICAL SYSTEM .................................4-7

4-6 REMOTE CONTROL ...................................4-8

4-7 SUSPENSION MAINTENANCE ............................4-9

4-8 ALIGNMENT ........................................4-10

4-9 BRAKE SYSTEM MAINTENANCE ........................4-13

4-10 HUB AND DRUM MAINTENANCE ........................4-19

4-11 WHEEL BEARING LUBRICATION AND ADJUSTMENT.........4-22

4-12 TIRE MAINTENANCE ..................................4-23

4-13 WINCHES ..........................................4-24

4-14 AIR SYSTEM FILTER AND LUBRICATOR ..................4-26

5 TROUBLESHOOTING GUIDE

SAFETY PRECAUTIONS

THIS IS THE SAFETY ALERT SYMBOL. IT IS TO ALERT YOU TO POTEN-

TIAL PERSONAL INJURY HAZARDS. OBEY ALL SAFETY MESSAGES

THAT FOLLOW THIS SYMBOL TO AVOID POSSIBLE INJURY OR DEATH.

DANGER DANGER INDICATES A POTENTIALLY HAZARDOUS SITUATION

WHICH, IF NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS IN-

JURY.

WARNING WARNING INDICATES A POTENTIALLY HAZARDOUS SITUATION

WHICH, OF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS

INJURY.

CAUTION CAUTION INDICATES A POTENTIALLY HAZARDOUS SITUATION

WHICH, IF NOT AVOIDED, MAY RESULT IN MINOR OR MODERATE

INJURY.

CAUTION CAUTION USED WITHOUT THE SAFETY ALERT SYMBOL INDICATES

A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED,

MAY RESULT IN PROPERTY DAMAGE.

iii

1INTRODUCTION

This manual provides operating, servicing, and maintenance instructions for Model 334C car carrier,

manufactured by Landoll Corporation, Marysville, Kansas 66508.

SECTION 1 gives basic instructions on the use of this manual.

SECTION 2 gives product specifications. These specifications supply lengths and measures for your

equipment. A Standard Bolt Torque Table is provided to give guidelines for bolt torques

to be used when servicing this product.

SECTION 3 contains assembly instructions for your Model 334C car carrier. When these procedures

are correctly followed, your equipment should provide you years of trouble-free opera-

tion and service.

SECTION 4 instructs how to operate your equipment before using it, and describes adjustments

needed. It also gives practical advice for the care and maintenance of your Landoll

equipment. Drawings in this section locate adjustment points on the equipment.

NOTE: IF THE EQUIPMENT IS IMPROPERLY ASSEMBLED OR MAINTAINED, THE

WARRANTY IS VOID. IF YOU HAVE ANY QUESTIONS CONTACT:

LANDOLL CORPORATION

1900 NORTH STREET

MARYSVILLE, KANSAS 66508

or phone:

(785) 562-5381 or

(800) 428-5655

or FAX:

(785) 562-4893

SECTION 5 is a troubleshooting guide to aid in diagnosing and solving problems with the equip-

ment.

PARTS LIST is a separate manual showing the various assemblies, subassemblies, and systems.

Refer to that manual when ordering Landoll replacement parts. Order parts from your

Landoll dealer.

WARRANTY The Warranty Registration form is included with the product documents. Fill it out and

mail it within 15 days of purchase. The Warranty is printed inside the front cover.

NOTE: IMPROPER ASSEMBLY, MODIFICATION, OR MAINTENANCE OF YOUR

LANDOLL EQUIPMENT CAN VOID YOUR WARRANTY.

COMMENTS Address comments or questions regarding this publication to:

LANDOLL CORPORATION

1900 NORTH STREET

MARYSVILLE, KANSAS 66508

ATTENTION: PUBLICATIONS -DEPT. 55

1-1

2STANDARD SPECIFICATIONS

MODEL 331 - SINGLE CAR CARRIER (OVER-THE-CAB)

DECK:

LENGTH ...........................................................13’-0"

OUTSIDE WIDTH ........................................................92"

INSIDE WIDTH..........................................................84"

CAPACITY ..........................................................1CAR

WINCH:

QUANTITY ..............................................................1

CAPACITY ........................................................8,000 LB.

CABLE LENGTH ........................................................65’

FRONT OVERHANG: ......................................................24"TO36"

MODEL 334C - 4 CAR CARRIER

OVERALL LENGTH..............................................................35’

OVERALL WIDTH ..............................................................102"

WEIGHT ................................................................ 13,300 LB.

UPPER DECK:

INSIDE WIDTH..........................................................87"

DECK HEIGHT (TRANSPORT POSITION) ................................98"-119"

LOWER DECK:

INSIDE WIDTH..........................................................94"

DECK HEIGHT (TRANSPORT POSITION) .....................................34"

WINCH:

QUANTITY ..............................................................4

CAPACITY ........................................................8,000 LB.

CABLE LENGTH ........................................................65’

PIN SETTING: .................................................................34"

SWING CLEARANCE: ...........................................................55"

CAPACITY:

VEHICLES...............................................................4

TOTAL VEHICLE WEIGHT ALLOWED ..................................12,700 LB.

GAWR ........................................................18,160 LB.

GVWR ........................................................26,000 LB.

LOADING ANGLES:

UPPER DECK ....................................................17°TO26°

LOWER DECK .....................................................9°TO17°

CONTROL ..........................................MANUAL AND REMOTE HYDRAULIC

2-1

HYDRAULIC HOOKUP:

QUICK COUPLERS......................................................3/4"

MAXIMUM OPERATING PRESSURE** ....................................2500 PSI

OPERATING FLOW** .................................................17GPM

ELECTRICAL HOOKUP: ............................................7-WAY CONNECTOR

AIR HOOKUP: .........................................................GLAD HANDS

SPECIFIC BOLT TORQUES

AIR RIDE SUSPENSION:

EQUALIZER BEAM PIVOT BOLT: ....................................800FT.-LBS.

SHOCK ABSORBER MOUNTING: ....................................150FT.-LBS.

AIR SPRING MOUNTING: 1/2" .......................................35FT.-LBS.

3/4" ...........................................................35FT.-LBS.

WHEEL FASTENERS - ALL MODELS:

OUTER SPINDLE NUTS ........................................250-400 FT.-LBS.

PILOT WHEEL NUTS ..........................................450-500 FT.-LBS.

DISK WHEEL INNER WHEEL NUTS .............................. 450-500 FT.-LBS.

DISK WHEEL OUTER WHEEL NUTS ..............................450-500 FT.-LBS.

* CAPACITY RATINGS ARE FRAME CAPACITIES ONLY. ACTUAL LOAD CAPACITIES MAY BE RE-

STRICTED BY FACTORS SUCH AS GROSS AXLE WEIGHT RATINGS (GAWR) OR STATE AND FED-

ERAL REGULATIONS.

** TRACTOR HYDRAULIC POWER SUPPLY MUST BE CAPABLE OF OPERATING AT THIS PRES-

SURE AND FLOW RATE AND BE EQUIPPED WITH A PRESSURE RELIEF VALVE SET AT THIS

PRESSURE.

2-2

Table of contents

Other Landoll Utility Vehicle manuals

Popular Utility Vehicle manuals by other brands

Polaris

Polaris ACE 900 SP owner's manual

TrailMax

TrailMax T-12-UR manual

Floe

Floe Cargo Max 9.5-73 Assembly instructions

Toro

Toro 07277 Workman 2110 Operator's manual

Taylor-Dunn

Taylor-Dunn B0-050-00 Operation, t roubleshooting and replacement parts manual

Toro

Toro 133-7128 installation instructions

Taylor-Dunn

Taylor-Dunn ET 3000 manual

Kayo

Kayo S70 Assembly manual

Range Road

Range Road RR608 Assembly manual

pronovost

pronovost PUMA-10000 Operator's manual

SSI SCHAEFER

SSI SCHAEFER WEASEL LITE user manual

Club Car

Club Car TURF 272 2005 Maintenance service manual

Toro

Toro 07059TC Operator's manual

Cushman

Cushman Turf Truckster 84069 Parts & maintenance manual

BERG

BERG Large Trailer user manual

Cub Cadet

Cub Cadet Big Country 641 Operator's manual

Westward

Westward Go-4 XTR Operator's manual

Club Car

Club Car Carryall I 1999 owner's manual