La Crosse 616-146Av2 User manual

Model: 616-146A v2 www.lacrossetechnology.com/support Page | 1

Model: 616-146Av2

Quick Setup Guide

DC: 111815

Atomic Projection Alarm Clock

BUTTONS

Snooze/Backlight

Battery

Compartment

2 “AAA”

AC Power Jack

HX-0501500U

Time, Alarm

with Snooze

Indoor

Temperature +

Trends

Projection

Arm

Rotates 180°

Moon Phase

+ Calendar

USB

Charge

Port 1A

Model: 616-146A v2 www.lacrossetechnology.com/support Page | 2

GET STARTED

Step 1: Insert the included 5-volt AC power adapter into the wall outlet then

into the projection alarm.

Step 2: Insert 2 new “AAA” batteries (not included) into the projection alarm.

Observe the correct polarity.

If the indoor temperature is not displayed after 60 seconds, unplug the AC

adapter and remove batteries from the projection alarm, press a button 20

times. After 5 minutes, return to Step 1 above.

SET TIME AND DATE

1. Hold the SET/°F/°C button to enter time set mode.

2. Use the +/PROJ or -/TIME buttons to adjust values.

Press and hold for fast adjustment.

3. Press the SET/°F/°C button to confirm and move to the next item.

Time and Date setting order:

1. WWVB (ON/OFF)

2. Time Zone

3. DST Daylight Saving Time (ON/OFF)

4. 12/24 Hour Time Format

5. Hour

6. Minutes

7. Year

8. Month

9. Date

Note: Day of the week sets automatically.

Press the SET/°F/°C button to exit, or wait 20 seconds without pressing

buttons to return to the normal time display.

FAHRENHEIT/CELSIUS

•Press the SET/°F/°C button to select Fahrenheit or Celsius

temperature display.

SET TIME ALARM

1. Hold the ALARM button to enter alarm time set mode.

2. Use the +/PROJ or -/TIME buttons to adjust values.

3. Press the ALARM button to confirm adjustments and move to the next

item.

Alarm Time setting order:

1. Hours

2. Minutes

Model: 616-146A v2 www.lacrossetechnology.com/support Page | 3

ACTIVATE / DEACTIVATE TIME ALARM

•Press the ALARM button once to view alarm time.

•Press the ALARM button again to activate the alarm.

Bell icon appears.

•Press the ALARM button again to deactivate the alarm.

The bell icon disappears.

SNOOZE (Silences alarm temporarily)

•Press the SNOOZE/LIGHT button to silence alarm for 9 minutes.

•Zz will show.

•When in snooze mode, press ALARM to stop alarm for one day.

Note: The alarm is crescendo sound. The alarm will sound for 2 minutes and

then shut off completely.

USB CHARGE PORT

Charge a smart phone, camera or other devices when the forecast station is

plugged into a power outlet with the included 5VAC adapter.

NOTE: This is a power-output charging port. It does not supply power to the

forecast station.

•Connect your external device’s USB charging cable (not included) to the

USB charging port.

•Charging times will vary.

•USB Power Output: 1A maximum current. Charge 1A devices or

devices that are self-regulating.

MOON PHASE

The moon phase is based on the year, month and date set (manually or by

the WWVB signal). These are the moon phases.

BACKLIGHT AND PROJECTION INTENSITY (TOGETHER)

Press and release the SNOOZE/LIGHT button to adjust the brightness of the

backlight and projection image (together):

•ON High intensity

•ON Low intensity

•OFF

Note: When theAdapter is NOT in use, the High/Low/On/Off features are not

available.

Alarm

Bell Icon

Model: 616-146A v2 www.lacrossetechnology.com/support Page | 4

PROJECTION (On/Off, rotate, projection mode)

Battery Power: Press and release the SNOOZE/LIGHT button to show the

projection for 10 seconds.

Note: Using Battery power, the projection and backlight will come on for 10

seconds when SNOOZE/LIGHT is pressed. Projection will not display

constantly when operating on battery power.

A/C Power Projection ON/OFF:Projection is displayed constantly

unless turned off.

•Hold the +/PROJ button for 3 seconds to turn off the projection.

•Press the +/PROJ button to turn on the projection.

Rotate Projection:

•Press the PROJECTION button to rotate the projection image 90

degrees.

•Press the PROJECTION button again to rotate another 90 degrees.

Change Projection Modes: Hold, then release the PROJECTION button to

switch projection modes. Watch the projection image to view the changes.

•Time and Indoor Temperature: alternate every 5 seconds (default)

•Time

•Indoor Temperature

MANUAL WWVB RADIO-CONTROLLED TIME SEARCH

•Press the -/TIME button to start or stop a manual signal search. WWVB

Icon will flash

For information about WWVB visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

TEMPERATURE TREND INDICATORS

The temperature (2°F/1°C) trend indicators update every 30 minutes or less.

•Temperature has

risen

in the past 3 hours.

•Temperature has not changed in the past 3 hours.

•Temperature has fallen in the past 3 hours.

LOW BATTERY ICON

If the icon is displayed in Indoor Temperature section,

replace batteries in the projection clock.

Low

Battery

Icon

WWVB

Icon

Model: 616-146A v2 www.lacrossetechnology.com/support Page | 5

POSITION PROJECTION ALARM

•The projection alarm has a wide base to sit on a desk or table.

•Choose a location 6 feet or more from electronics such as cordless phones,

wireless gaming systems, televisions, microwaves, routers, baby monitors, etc.,

which can prevent signal reception.

•Position near an exterior wall that faces Ft. Collins Colorado for WWVB time

signal reception.

CARE AND MAINTENANCE

•Do not mix old and new batteries

•Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

•Always purchase the correct size and grade of battery most suitable for the intended

use.

•Replace all batteries of a set at the same time.

•Clean the battery contacts and also those of the device prior to battery installation.

•Ensure the batteries are installed correctly with regard to polarity

(+and -).

•Remove batteries from equipment with is not to be used for an extended period of time.

•Remove expired batteries promptly.

SPECIFICATIONS

Indoor:

Temperature Range:

+32°F to +122°F (0°C to 50°C)

Interval:

About every 30 seconds

USB Charging Port

USB Output: 1 Amp maximum current

Power:

Projection Alarm

Primary Power:

AC: HX-0501500U

5-volt AC power adapter (included)

Optional/Battery Backup

Optional 2-AAA, IEC, LR3 batteries

(not included)

Battery Life:

Projection Alarm

Battery Backup:

Battery life is over 24 months when using

the AC adapter for primary power

Dimensions:

Projection Alarm:

5.23” L x 1.96” W x 4.33” H

(133 x 50 x 110 mm)

CANADA STATEMENT

This device complies with Industry Canada’s license-exempt RSSs.

Operation is subject to the following two conditions:(1) This device may not

cause interference; and(2) This device must accept any interference,

including interference that may cause undesired operation of the device.

Model: 616-146A v2 www.lacrossetechnology.com/support Page | 6

WARRANTY AND SUPPORT

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase)

on this product relating to manufacturing defects in materials & workmanship.

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

For warranty work, technical support or other information contact out friendly support

staff:

La Crosse Technology, Ltd

2830 South 26th St

La Crosse, WI 54601

Contact Support:

1-608-782-1610

Online Product Support:

www.lacrossetechnology.com/support

Product Registration:

www.lacrossetechnology.com/support/register

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or

transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user authority to operate

the equipment.

duplicated or processed using electronic, mechanical or chemical process without the written

permission of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked

and corrections are included in subsequent editions. We disclaim any responsibility for any

technical error or printing error, or their consequences.

All trademarks and patents are recognized.

Table of contents

Other La Crosse Clock manuals

La Crosse

La Crosse 433-3836 User manual

La Crosse

La Crosse 404-3041 User manual

La Crosse

La Crosse illuminations BBB87283 User manual

La Crosse

La Crosse WS-8007U User manual

La Crosse

La Crosse 513-1919 Installation guide

La Crosse

La Crosse 513-1311OT User manual

La Crosse

La Crosse WS-6118 User manual

La Crosse

La Crosse 404-2635 User manual

La Crosse

La Crosse 404-4070 User manual

La Crosse

La Crosse WT-3181PL User manual

La Crosse

La Crosse M78786 User manual

La Crosse

La Crosse WT535 User manual

La Crosse

La Crosse PCR156 User manual

La Crosse

La Crosse 404-2634INT User manual

La Crosse

La Crosse BBB81403 User manual

La Crosse

La Crosse Equity 29004 User manual

La Crosse

La Crosse 404-3950 User manual

La Crosse

La Crosse 403-3246 User manual

La Crosse

La Crosse WT-8112U User manual

La Crosse

La Crosse 519-1416 User manual

La Crosse

La Crosse 404-3015 User manual

La Crosse

La Crosse 519-1416 User manual

La Crosse

La Crosse 617-249 Operating and maintenance manual

La Crosse

La Crosse 404-4040 User manual

Popular Clock manuals by other brands

Silicon Laboratories

Silicon Laboratories SI5324 manual

Heathkit

Heathkit GC-1005 Assembly manual

Oregon Scientific

Oregon Scientific PRYSMA RMR221P manual

Andrew O'Malley

Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing

ALGE-Timing ASC3 manual

Bodet

Bodet Profil 960 Installation and operating instructions

Nixie Clock

Nixie Clock Divergence Meter user manual

La Crosse Technology

La Crosse Technology WS-8256-AL user manual

Mini Gadgets

Mini Gadgets MCPro user manual

Casio

Casio TMR-200 user guide

Progetti

Progetti ILTEMPOSTRINGE Directions

BVItech

BVItech BV-101 instruction manual

Progetti

Progetti KALIMERO Directions

La Crosse Technology

La Crosse Technology WT-3141b Quick setup instructions

La Crosse Technology

La Crosse Technology W86531 owner's manual

Sharp

Sharp SPC900 instruction manual

La Crosse Technology

La Crosse Technology 404-50447 quick start guide

Datexx

Datexx DF0063 quick guide