La Crosse Technology WT-8005U User manual

WT-8005U www.lacrossetechnology.com/support Page | 1

Model: WT-8005U

Instruction Manual

DC: 091715

Digital Atomic Wall Clock

Get Started

Step 1: Insert 2 fresh AA, LR6 1.5 volt Alkaline batteries into the atomic

clock according to the polarity markings.

Time, Alarm +

WWVB Icon

Indoor Temperature,

Weekday, + Date

2-AA batteries

BUTTONS

WT-8005U www.lacrossetechnology.com/support Page | 2

IMPORTANT:

The clock will look for the Atomic time signal for 7 minutes when batteries

are first installed. Buttons will not function during the Atomic time

signal search.

Hold the WWVB SEARCH button for 3 seconds to stop the Atomic

signal search.

Manually set the time and time zone.

The clock will search for the Atomic time signal again after midnight.

Press WWVB SEARCH button anytime, to start an Atomic signal

search.

For information about Atomic Time, visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

Set Time, Date, 12/24 Hour

1. Press the SET button to enter time set mode, confirm

adjustments and move to next item.

2. Press the ▲ or ▼ buttons to adjust values.

Settings order:

1.12/24 Hour Format 2. Hour 3. Minutes 4. Year 5. Month 6. Date

7. Daylight Saving Indicator

Press SET to exit, or wait 30 seconds without pressing buttons to return

to the normal time display.

Time Zone/Temperature Units

Press the ZONE button to select your time zone.

oP= Pacific

oM= Mountain

oC = Central

oE= Eastern

Press the ºF/ºC button to switch from Fahrenheit to Celsius.

Set Alarm Time

Hold the ALARM button to set time alarm.

Press the ▲ or ▼ buttons to adjust values.

Press the ALARM button to confirm adjustments and

move to next item.

Setting order: 1. Hour 2. Minutes

Press ALARM to exit, or wait 30 seconds without pressing buttons to

return to the normal time display.

SET

▲ ▼

ALARM

ZONE ºF/ºC

▲ ▼

WT-8005U www.lacrossetechnology.com/support Page | 3

Deactivate/Activate Alarm

Press ALARM once to deactivate the alarm.

The alarm icon will disappear.

Press ALARM once to activate the alarm.

The alarm icon will appear.

Snooze

Press SNOOZE to silence an active alarm for 5 minutes.

The alarm icon will flash.

This is a crescendo alarm that will sound for 120 seconds if not

deactivated. Press any button to stop the alarm for 24 hours.

Reset Button

If the atomic clock display appears distorted or is not

responding to buttons, use a pen or paperclip to press

RESET one time.

This will reset the atomic clock to default settings.

Specifications

Indoor:

Temperature Range:

14.1°F to +139.9°F (-9.9ºC to +59.9ºC)

Power:

Atomic clock

2-AA, IEC, LR6 batteries (not included)

Battery Life:

Atomic clock

Up to 24 months

Dimensions:

Atomic clock:

8.9” L x 1.2” W x 7.2” H

(226.06 L x 30.48W x 182.8 H mm)

Care and Maintenance

Do not mix old and new batteries

Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

Always purchase the correct size and grade of battery most suitable for

intended use.

Replace all batteries of a set at the same time.

Clean the battery contacts and also those of the device prior to battery

installation.

Ensure the batteries are installed with correct polarity (+and -).

Remove batteries from equipment with is not to be used for an extended

period.

Remove expired batteries promptly.

Alarm

Icon

SNOOZE

WT-8005U www.lacrossetechnology.com/support Page | 4

Warranty and Support Information

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of

purchase) on this product relating to manufacturing defects in materials &

workmanship.

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

For warranty work, technical support or other information contact:

La Crosse Technology, Ltd

2830 26th Street S.

La Crosse, WI 54601

Contact Support: Online Product Support:

1-608-782-1610 www.lacrossetechnology.com/support

Product Registration:

www.lacrossetechnology.com/support/register

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user authority to operate the

equipment.

processed using electronic, mechanical or chemical process without the written permission of the

publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and

corrections are included in subsequent editions. We disclaim any responsibility for any technical error or

printing error, or their consequences.

All trademarks and patents are recognized.

Canada Statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the

following two conditions:(1) This device may not cause interference; and(2) This device must accept

any interference, including interference that may cause undesired operation of the device.

Other manuals for WT-8005U

This manual suits for next models

Table of contents

Other La Crosse Technology Clock manuals

La Crosse Technology

La Crosse Technology W80000 User manual

La Crosse Technology

La Crosse Technology 512A-811 User manual

La Crosse Technology

La Crosse Technology 404-3556A Dimensions

La Crosse Technology

La Crosse Technology C75723-AU User manual

La Crosse Technology

La Crosse Technology WT-3122A User manual

La Crosse Technology

La Crosse Technology 515-1912 User manual

La Crosse Technology

La Crosse Technology WT-8008U User manual

La Crosse Technology

La Crosse Technology 513-1429BL Dimensions

La Crosse Technology

La Crosse Technology C86279V3 User manual

La Crosse Technology

La Crosse Technology 817-2410 Dimensions

La Crosse Technology

La Crosse Technology WT-3161WH User manual

La Crosse Technology

La Crosse Technology 404-1225 User manual

La Crosse Technology

La Crosse Technology 513-1919 User manual

La Crosse Technology

La Crosse Technology Sagebrook 404-3015CC User manual

La Crosse Technology

La Crosse Technology 83193-BHG User manual

La Crosse Technology

La Crosse Technology C86279 Operating and maintenance manual

La Crosse Technology

La Crosse Technology 513-1918S User manual

La Crosse Technology

La Crosse Technology WS-7038U User manual

La Crosse Technology

La Crosse Technology WT-3143H Manual

La Crosse Technology

La Crosse Technology 513-1918B Dimensions

La Crosse Technology

La Crosse Technology WS-8011UM-TWC User manual

La Crosse Technology

La Crosse Technology 513-1417 Operating and maintenance manual

La Crosse Technology

La Crosse Technology 102819 User manual

La Crosse Technology

La Crosse Technology WT-8002U User manual

Popular Clock manuals by other brands

Silicon Laboratories

Silicon Laboratories SI5324 manual

Heathkit

Heathkit GC-1005 Assembly manual

Oregon Scientific

Oregon Scientific PRYSMA RMR221P manual

Andrew O'Malley

Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing

ALGE-Timing ASC3 manual

Bodet

Bodet Profil 960 Installation and operating instructions

Nixie Clock

Nixie Clock Divergence Meter user manual

Mini Gadgets

Mini Gadgets MCPro user manual

Casio

Casio TMR-200 user guide

Progetti

Progetti ILTEMPOSTRINGE Directions

BVItech

BVItech BV-101 instruction manual

Progetti

Progetti KALIMERO Directions

Sharp

Sharp SPC900 instruction manual

Datexx

Datexx DF0063 quick guide

LG LEC-005 owner's manual

IKEA

IKEA ROTBLÖTA manual

U-Line

U-Line Н-2811 instructions

Digiview

Digiview RC305EL user manual