La Crosse Technology C86279V3 User manual

Atomic Digital Oce Clock

Model: C86279v3

D.C. 031819

For online video support:

http://bit.ly/LaxTechTalk

MONTH

DATE

Setup

Power up. Insert 2-AA batteries into the clock. Observe the correct polarity.

Conﬁgure basic settings. Hold the MODE button for 3 seconds to enter set-

tings menu. Use the + or- button to adjust and MODE to conﬁrm.

Setting order:

1. Language (English or Spanish)

2. Beep ON/OFF

3. Atomic ON/OFF

4. Time Zone

5. DST ON/OFF

6. 12/24 Hour

7. Hour

8. Minutes

9. Year

10.Month

11.Date

12.Fahrenheit/Celsius

English | Español Beep ON | OFF

Atomic ON | OFF Time Zone

AST

EST

CST

MST

PST

AKT

HAT

Atlantic

Eastern

Central

Mountain

Pacific

Alaskan

Hawaiian

Time Zone

Page | 1

Note: When the Atomic setting is

set to OFF, the menu will skip to

item #6, your 12/24 hour setting

Note: The clock will search for

Atomic time 2 hours after

batteries are installed.

Note: When Español is selected, the sub

menu instructions will be in Spanish.

DST ON | OFF Hour

Minutes Year

Month Date

Fahrenheit | Celsius

Atomic Time

• The clock will automatically search at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.

• If there is no WWVB reception, the clock will search for the atomic time signal

every 2 hours until the WWVB time is received.

• After reception, this clock will only search for the atomic signal after midnight.

• From normal time display hold the MINUS button for 3 seconds, to search for the

WWVB time signal.

• For information about WWVB visit: http://bit.ly/AtomicTime

Page | 2

Display icons

AM | PM

Low Battery

Alarm

Atomic Time

Fahrenheit | Celsius

MONTH

DATE

DAY MONTH DATE

Snooze

Display: Date | Indoor Temp | Seconds

• Press and release the MODE button to customize how the top and right sections

of the clock are displayed.

• The clock will stay in the mode selected.

MODE 1:

Weekday &

Month/Date

MODE 2:

Day/Month/Date

& Temperature

MODE 3:

Day/Month/Date

& Seconds

MONTH

DATE

DAY MONTH DATE MONTHDAY DATE

Page | 3

Set Time Alarm

Activate/Deactivate Alarm

1. Hold the ALARM button to enter alarm settings. “AL” will show.

2. Press and release ALARM to activate/deactivate the alarm.

3. The bell icon will show when active.

Snooze

1. When alarm sounds press the SNOOZE/LIGHT button to silence the alarm for 10

minutes.

2. The alarm bell icon will show and Zz will ﬂash.

3. Press any button except SNOOZE/LIGHT to stop the alarm for 1 day.

Note: Alarm is crescendo sound. When the alarm sounds, it continues for 2 minutes

and then shuts o completely.

Alarm ON Alarm OFF

Low Battery Icon

• The low battery icon will appear between the hour and minutes.

• This icon indicates it is time to replace the batteries.

• Hold the ALARM button for 3 seconds to enter alarm settings menu.

• Use the + or- button to adjust and ALARM to conﬁrm.

Page | 4

Position Clock

The clock has a pullout stand to sit on a desk or table, or openings on the back to

mount on a wall.

• For best Atomic time reception orientate the clock with the front or the back

facing Ft. Collins, Colorado.

• Choose a location 6 feet or more from electronics such as cordless phones,

gaming systems, televisions, microwaves, routers etc.

We’re Here to Help!

Page | 5

Backlight: HI-LOW-OFF

• When operating with the AC adapter, the backlight is adjustable:

(HI-LOW-OFF).

• Press and release the SNOOZE/LIGHT HI-LOW-OFF button to adjust backlight.

• When operating on batteries only, the backlight will come on brieﬂy when the

SNOOZE/LIGHT button is pressed.

If you require additional support, call our friendly customer support team based out

of La Crosse, Wisconsin.

Phone: 1.608.782.1610

Or fill out our online support request form here:

bit.ly/contact_techsupport

Our knowledgeable customer support team is available:

Monday-Friday, 8am-6pm CST.

JOIN THE CONVERSATION

Ask questions, watch detailed setup videos, and provide feedback on our social

media outlets!

Indoor

Power

Battery Life

Dimensions

32˚F to 99˚F | 0˚C to 37˚C

Clock: 2 AA (LR6, IEC) batteries not included

24 months with reputable batteries

Clock: 9.84” L x 1.13” W x 7.48” H

(25.02cm L x 2.9cm W x 19.0cm H)

Specications

Care and Maintenance

• Do not mix old and new batteries

• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

• Always purchase the correct size and grade of battery most suitable for use.

• Replace all batteries of a set at the same time.

• Clean the battery contacts and also those of the device prior to battery

installation.

• Ensure the batteries are installed with correct polarity (+ and -).

• Remove batteries from equipment which is not to be used for an extended period

of time.

• Promptly remove expired batteries.

Warranty and Support

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of

purchase) on this product relating to manufacturing

defects in materials & workmanship.

Before returning a product, please contact our friendly customer support or visit our

online help:

Phone: 1-608-782-1610

Online: www.lacrossetechnology.com/support

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

Page | 6

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other

antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by

unauthorized changes or modiﬁcations to this equipment. Such changes or modiﬁ-

cations could void the user authority to operate the equipment.

duplicated or processed using electronic, mechanical or chemical

process without the written permission of the publisher. This booklet may

contain errors or misprints. The information it contains is regularly checked and

corrections are included in subsequent editions. We disclaim any

responsibility for any technical error or printing error, or their consequences.

All trademarks and patents are recognized.

Canada Statement

This device complies with CNR Industry Canada license -exempt devices.

Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may

cause undesired operation of the device.

FCC Statement

Page | 7

Table of contents

Other La Crosse Technology Clock manuals

La Crosse Technology

La Crosse Technology 404-3051 User manual

La Crosse Technology

La Crosse Technology WT-3141b Manual

La Crosse Technology

La Crosse Technology WT-8100 Specification sheet

La Crosse Technology

La Crosse Technology KWS-8140-BK User manual

La Crosse Technology

La Crosse Technology 513-1417H-AL Dimensions

La Crosse Technology

La Crosse Technology 513-1417 User manual

La Crosse Technology

La Crosse Technology 404-3036BW User manual

La Crosse Technology

La Crosse Technology 515-1419 Dimensions

La Crosse Technology

La Crosse Technology WS-8008U-IT User manual

La Crosse Technology

La Crosse Technology WT-8008U User manual

La Crosse Technology

La Crosse Technology W85746-BHG User manual

La Crosse Technology

La Crosse Technology 513-1417BS User manual

La Crosse Technology

La Crosse Technology BBB84022 Dimensions

La Crosse Technology

La Crosse Technology 513-1417 Operating and maintenance manual

La Crosse Technology

La Crosse Technology C86279 Dimensions

La Crosse Technology

La Crosse Technology 513-1417CH User manual

La Crosse Technology

La Crosse Technology Landshark User manual

La Crosse Technology

La Crosse Technology 404-1220v2 User manual

La Crosse Technology

La Crosse Technology 513-1211 User manual

La Crosse Technology

La Crosse Technology WT-3161 Installation guide

La Crosse Technology

La Crosse Technology 513-1429THV2 Dimensions

La Crosse Technology

La Crosse Technology WT-8029U User manual

La Crosse Technology

La Crosse Technology World Time Center WS-7092U User manual

La Crosse Technology

La Crosse Technology WS-8115U User manual

Popular Clock manuals by other brands

Silicon Laboratories

Silicon Laboratories SI5324 manual

Heathkit

Heathkit GC-1005 Assembly manual

Oregon Scientific

Oregon Scientific PRYSMA RMR221P manual

Andrew O'Malley

Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing

ALGE-Timing ASC3 manual

Bodet

Bodet Profil 960 Installation and operating instructions

Nixie Clock

Nixie Clock Divergence Meter user manual

Mini Gadgets

Mini Gadgets MCPro user manual

Casio

Casio TMR-200 user guide

Progetti

Progetti ILTEMPOSTRINGE Directions

BVItech

BVItech BV-101 instruction manual

Progetti

Progetti KALIMERO Directions

Sharp

Sharp SPC900 instruction manual

Datexx

Datexx DF0063 quick guide

LG LEC-005 owner's manual

IKEA

IKEA ROTBLÖTA manual

U-Line

U-Line Н-2811 instructions

Digiview

Digiview RC305EL user manual