Kramer WP-211T User manual

WP-211T Quick Start

P/N:

2900- 301088QS

Rev:

Scan for full manual

WP-211T Quick Start Guide

This guide helps you install and use your WP-211T for the first time.

Go to www.kramerav.com/downloads/WP-211T to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

WP-211T 1 Gang Ethernet and K-NET Control Keypad

1 Power adapter and cord

1 Quick start guide

1 Frame (or frame set) and faceplate

Installation accessories

Step 2: Get to know your WP-211T

Feature

Function

INPUT 1

HDMI Connector

Connect to an HDMI source to route to HDBT OUT.

Button

Press momentarily to manually select HDMI 1 (button lights orange).

Operation Mode

DIP-switches

By-default the DIP-switches are both set to OFF (left).

Controlling via the INPUT buttons overrides all DIP-switch settings and automatic

switching until the manually selected source disconnects, becomes inactive or WP-211T

is powered off.

DIP-switch 1

OFF (left) - Last connected mode.

ON (right) - Priority mode according to DIP-switch 2 settings.

DIP-Switch 2

OFF (left) - INPUT 1 is the default priority.

ON (right) INPUT 2 is the default priority.

WP-211T DIP-switches are located behind the faceplate and should be set during installation, before placing the

faceplate. Pressing an input button manually selects that input, independent of the DIP-switch settings.

INPUT 2

HDMI™Connector

Connect to an HDMI Source to route to HDBT OUT.

Button

Press momentarily to manually select HDMI 2 (button lights orange).

Grounding Screw

Connect to the common ground (optional) to prevent static electricity from impacting the

performance of the unit.

Feature

Function

GND 5V DC 2-pin Terminal

Block Connector

Connect to the supplied power adapter. Not needed on the WP-211T if there is a PoE

provider over HDBaseT.

HDBT OUT RJ-45 Connector

Connect to an HDBaseT receiver (for example, TP-580R).

Step 3: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your WP-211T. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to the WP-211T.

Grounding the WP-211T

Component Description

M3X6 screw

1/8" Toothed Lock

Washer

M3 Ring Tongue Terminal

To ground the WP-211T:

1. Connect the ring tongue terminal to the building grounding point wire (it is recommended to use a green-yellow

AWG#18 (0.82mm) wire, crimped with a proper hand-tool).

2. Insert the M3x6 screw through the toothed lock washers and the tongue terminal in the order shown above.

3. Insert the M3x6 screw (with the two toothed lock washers and ring tongue terminal) into the grounding screw hole and

tighten the screw.

Step 4: Install WP-211T

After connecting the ports, insert the device into the in-wall box and connect the parts as shown in the illustrations below:

EU/UK Version

US-D Version

DECORA® design frames are included in US-D models.

We recommend that you use any of the following standard 1 Gang in-wall junction boxes (or their equivalent):

•US-D: 1 Gang US electrical junction boxes.

•EU: 1 Gang in-wall junction box, with a cut-hole diameter of 68mm and depth that can fit in both the device and the

connected cables (DIN 49073).

•UK: 1 Gang in-wall junction box, 75x75mm (W, H), and depth that can fit in both the device and the connected cables

(BS 4662).

Step 5: Connect the power

If the device is not powered via HDBT PoE, connect the 5V DC power adapter to the WP-211T and plug the adapter into the

mains.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Use only the Kramer Electronics power supply that is provided with the unit.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

See www.KramerAV.com for updated safety information.

Technical Specifications

Inputs

2 HDMI

On female HDMI connectors

Outputs

1 HDBT

On a female RJ-45 connector

Video

Max. Data Rate

8.91Gbps (2.97Gbps per graphic channel)

Max. Resolution

4K@60Hz (4:2:0)

Standard Compliance

HDCP 2.2 (does not support conversion to HDCP 1.4),

HDMI 1.4

Controls

DIP-Switches

Last connected/priority DIP-switches

Front Panel

Input select buttons

Power

Consumption

5V DC, 780mA

Source

5V DC, 4A with open DC head

Environmental

Conditions

Operating Temperature

0° to +40°C (32° to 104°F)

Storage Temperature

-40° to +70°C (-40° to 158°F)

Humidity

10% to 90%, RHL non-condensing

Regulatory

Compliance

Safety

CE, UL

Environmental

RoHs, WEEE

Enclosure

Size

1 Gang wall plate

Cooling

Passive heat sink (metal sheet)

General

Net Dimensions (W, D, H)

US-D: 7cm x 3.7cm x 11.4cm (2.8" x 1.5" x 4.5)

EU: 8cm x 3.8cm x 8cm (3.1" x 1.5" x 3.1)

UK: 8.6cm x 3.8cm x 8.6cm (3.4" x 1.5" x 3.4")

Shipping Dimensions (W, D,

23.2cm x 13.6cm x 10cm (9.1" x 5.4" x 3.9")

Net Weight

0.2kg (0.4lbs) approx..

Shipping Weight

0.6kg (1.2lbs) approx.

Accessories

Included

1 Power adapter, 1 power cord, installation accessories

US-D version: 2 US Frame sets and faceplates (1 in black

and 1 in white)

European version: 1 EU white frame, 1 UK white frame, 1

EU/UK white faceplate

Specifications are subject to change without notice at www.kramerav.com

DECORA® is a registered trademark of Leviton Manufacturing Co., Inc.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual