Kramer VM-1010 User manual

KRAMER ELECTRONICS LTD.

USER MANUAL

MODELS:

VM-1010

Programmable Video

Distributor

VM-1021

1:20 Video Distributor

VM-1055

ideo Component Distributor

VM-54

ideo/Component Distributor

mplifier

P/N: 2900-300182 Rev 1

VM-1010, VM-1021, VN-1055, VM-54 – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1Achieving the Best Performance 2

3Installing in a Rack 3

4Your VM-1010 4

4.1Overview 4

4.2Connecting the VM-1010 7

4.3VM-1010 Technical Specifications 8

5Your VM-1021 9

5.1Overview 9

5.2Connecting the VM-1021 12

5.3VM-1021 Technical Specifications 13

6Your VM-1055 14

6.1Overview 14

6.2Connecting the VM-1055 17

6.3VM-1055 Technical Specifications 18

7Your VM-54 19

7.1Overview 19

7.2Connecting the VM-54 22

7.3VM-54 Technical Specifications 23

Figures

Figure 1: VM-1010 Programmable Video Distributor Front Panel 5

Figure 2: VM-1010 Programmable Video Distributor Rear Panel 6

Figure 3: Connecting the VM-1010 7

Figure 4: VM-1021 1:20 Video Distributor Front Panel 10

Figure 5: VM-1021 1:20 Video Distributor Rear Panel 11

Figure 6: Connecting the VM-1021 12

Figure 7: VM-1055 Video Component Distributor Front Panel 15

Figure 8: VM-1055 Video Component Distributor Rear Panel 16

Figure 9: Connecting the VM-1055 17

Figure 10: VM-54 Video/Component Distributor Amplifier Front Panel 20

Figure 11: VM-54 Video/Component Distributor Amplifier Rear Panel 21

Figure 12: Connecting the VM-54 22

VM-1010, VM-1021, VN-1055, VM-54 - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer VM-1010, VM-1021, VN-1055 or

VM-54 distribution amplifier that is ideal for the following typical applications:

•Broadcast, production, or presentation systems requiring high-quality signal

distribution

•Schools, retail, sports bars, other point-of-sale and CCTV applications

•Computer RGB or component video distribution

2 VM-1010, VM-1021, VN-1055, VM-54 - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high-performance, high-resolution cables

•Use only the power cord that is supplied with this machine

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables to avoid interference, deterioration

in signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer product away from moisture, excessive sunlight and

dust

Caution: There are no operator serviceable parts inside the unit

Warning: Disconnect the power and unplug the unit from the wall

before installing

Your amplifier is pre-calibrated at the factory for

transparent operation. Re-tuning it can upset signal

transparency.

Do not attempt to adjust the LEVEL trimmers without

using accompanying standard calibrated oscilloscope

or waveform monitor!

VM-1010, VM-1021, VN-1055, VM-54 - Installing in a Rack 3

3 Installing in a Rack

This section provides instructions for rack mounting the 1U devices. 2U and 3U

devices use the same procedure with longer rack “ears” and additional screws.

4 VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010

4 Your VM-1010

This section describes the VM-1010 Programmable Video Distributor.

4.1 Overview

The VM−1010 is a highperformance distribution amplifier for composite video. It

can also be configured as a 1:5 distribution amplifier for sVideo (Y/C) signals and

has controls to compensate for signal losses inherent in long cable runs.

The VM−1010 is designed for studio and other demanding applications. It has two

looping video inputs, each splitting to 5 outputs. The user may select 2x1:5 or 1:10

operation via front panel control switches. Several VM-1010 units may be chained

through the looping inputs. Output signals are DC or AC coupled (user selectable)

for maximum flexibility.

The unit features:

•High bandwidth of 235MHz (3dB)

•Dual-mode configuration either as a 1:10 (composite) or a 1:5 (sVideo) DA

•Grouped level (gain) and EQ (peaking) controls

•A video AC/DC coupling selection

•Looping inputs

•Selectable input signal termination

•Standard 19” rack mount size of 1U

Figure 1 and Figure 2 define the unit.

VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010 5

VM-1010, VM-1021, VN-1055, VM-54 – The VM-1010 Programmable Video Distributor 5

Figure 1: VM-1010 Programmable Video Distributor Front Panel

# Feature Function

1 POWER Switch Illuminated switch for turning the device on and off

2 CHANNEL B EQ Trimmer Controls cable equalization of channel B outputs

3 CHANNEL B LEVEL Trimmer Controls the video level of channel B outputs

4 MODE Button Selects either 1:10 or 2 x 1:5 operation

5 CHANNEL A EQ Trimmer Controls cable equalization of channel A outputs

6 CHANNEL A LEVEL Trimmer Controls the video level of channel A outputs

6 VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010

Figure 2: VM-1010 Programmable Video Distributor Rear Panel

# Feature Function

CHANNEL A

OUT BNC Connectors (1A-5A) 5 amplified and buffered video outputs

8 INPUT A BNC Connector Connects to a composite/component/YC/analog sync video source A

9 75Button Selects "75" or "HI-z" impedance (for looping select "Hi-z")

10 DC Button Selects DC coupling when pushed

11 LOOP BNC Connector Provides video looping capability to increase number of outputs

CHANNEL B

INPUT B BNC Connector Connects to a composite/component/YC/analog sync video source B

13 75Button Selects "75" or "HI-z" impedance (for looping select Hi-z)

14 DC Button Selects DC coupling when pushed

15 LOOP BNC Connector Provides video looping capability to increase number of outputs

16 OUT BNC Connectors (1B-5B) 5 amplified and buffered video outputs.

17 Power Connector AC connector and fuse enabling power supply to the unit

6VM-1010, VM-1021, VN-1055, VM-54 – The VM-1010 Programmable Video Distributor

VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010 7

4.2 Connecting the VM-1010

Always switch off the power to each device before connecting it to your

VM-1010. After connecting your VM-1010, connect its power and then

switch on the power to each device.

To connect the VM-1010 as illustrated in the example in Figure 3:

1. Connect up to two video sources (for example composite video players) to

CHANNEL A INPUT A and CHANNEL B INPUT B BNC connectors.

2. Connect up to five video acceptors (for example, composite video recorders)

to each channel.

3. As required, select the coupling and termination, the MODE (2x1:5 or 1:10)

and adjust the EQ and LEVEL of each channel as needed.

Figure 3: Connecting the VM-1010

8 VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010

Note:

•Terminate unused inputs to 75, and terminate active inputs at the

connecting source

•Remember, the output signal format matches the input signal format (for

example, if the input is composite, the output is composite)

•All signal cables to each device should be of equal length (for example, the

R,G,B cables between a camera and the amplifier should be of equal length)

4.3 VM-1010 Technical Specifications

INPUTS: 2 composite/component video, looping, 1Vpp/75on

BNC connectors with termination switch

OUTPUTS: 2x5 composite/component video, 1Vpp/75on BNC

connectors

MAX. VIDEO OUTPUT: 1.8Vpp

VIDEO BANDWIDTH (-3DB): 235MHz

DIFF. GAIN: 0.2%

DIFF. PHASE: 0.04Deg

K-FACTOR: <0.05%

VIDEO S/N RATIO: 77dB

NON-LINEARITY: 0.2%

CONTROL: Level: 1.4dB to +2.5dB, EQ.: 0 to +2.5dB @4.4MHz

COUPLING: DC or AC (user selectable)

POWER SOURCE: 230V AC, 50/60Hz (115V USA), 10.3VA

OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F)

STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F)

HUMIDITY: 10% to 90%, RHL non-condensing

DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable

WEIGHT: 1.98kg (4.4lbs) approx.

ACCESSORIES: Power cord

Specifications are subject to change without notice at http://www.kramerelectronics.com

Other manuals for VM-1010

This manual suits for next models

Table of contents

Popular Media Converter manuals by other brands

SoundTraxx

SoundTraxx Blunami BLU-2200 user guide

SPROLINK

SPROLINK VA1 user manual

Acclaim Lighting

Acclaim Lighting DDC-1-AC user guide

Nikon

Nikon AF-S TC-20E III user manual

Axis

Axis AXIS Q7406 user manual

Omega

Omega TAC80B-J instruction sheet

Zoom

Zoom Thunderbolt TAC-2R Operation manual

OST

OST iConverter 10/100M quick start guide

Vertiv

Vertiv Netsure user manual

birddog

birddog MINI user guide

Roland

Roland GI-10 owner's manual

Wallenstein

Wallenstein WX310 Operator's manual

Pace

Pace MSS 200-1 Service manual

Solar Converters

Solar Converters EQ 12/24-50 manual

CYP

CYP EL-7400V Operation manual

TIE

TIE MIDI 1i1o user manual

DCS

DCS Vivaldi Upsampler user manual

Westermo

Westermo MCW-211 SERIES user guide