●Ex：Set the heating stage from 1st
stage to 3rd stage.
Specifications
4-1
Standby mode, press and hold the
push button 3 seconds to enter into
the quick heating mode.
●
Quick heating mode.
●
Low-voltage mode Description
4-2
At this moment, LED flashes.
●
The heating system will be turned off automatically when the voltage is lower than 11.5 V.
●
Standby mode will be enabled when the voltage over 11.5 V is restored.
Trouble shooting
5
※If still can't solve the problems according to the step above, please contact with distributors or us.
The following situation do not indicate malfunction of the meter. Pleasecheck the following before taking it in for repair.
Trouble
LED indication does not activate.
●
Power supply cable
It might causing by the setting
is not proper set up.
→ Please make sure and
double check if setting is under
the idle mode.
It might be the battery is
running out.
→ Please check your battery
voltage as soon as possible.
It might be causing by no
power supply.
→Please check if power
harness and fuse broken or
disconnected.
→Please check if positive pole
and negative pole is well
connected.
It might be causing by
improper setup.
→Please check if all function
setup is properly proceeded.
Please referring to 4-1
Specification and check with
each step.
disconnected.
→Please check if power supply
cable is broken or disconnect-
ed.
→Please check if positive and
negative poles are properly
connected.
●
●
●
●
Check item Trouble
When turn the key on, the
headed grip is not heating up.
Check item
At this moment, the LED lights will
flash once from left to right.
At this moment, the LED lights will
flash once from left to right.
At this moment, the LED lights will
flash once from left to right.
●
wh000axg1a
●Memory of heating mode.
At this moment, the LED indicators
are on.
At this moment, LED flashes.
●Ex：The last heating stage in memory
before turning off the switch is the 3rd
stage.
B. Memory of heating mode
C. Memory of heating mode
C.Quick heating mode
B. Memory of heating mode
PUSH
OPEN
LOCK
OFF ON
●Example：To set the heating stage to
the third stage.
●
●Press the push button to select the
desired set value.
●Ex：The current heating stage is set
to the 1st stage.
A. Heating stage setup
Standby mode, press the push button
once to enter into the heating mode.
●
C.Quick heating mode
B.Memory of heating mode
Turn the key on to enter the stand by
mode.
This stage is for self-check
without enabling the heating
function.
The default set is off.
The switch is characterized with
memory function；and 3
seconds after setting the
number of stage, the set
number of stage will be
memorized automatically. If the temperature is felt
enough, press the push button
once to stop the quick heating.
Setting range: Off → 1st stage
(low temperature) → 2nd stage
→ 3rd stage → 4th stage → 5th
stage (high temperature)
