KOOGEEK S1 User manual

Koogeek-S1

Function

View 8 Groups of Body Composition Data via the app.

Weight: Check your weight trends

Lean Mass %: Track muscle gain

Fat Mass%: Measure body fat percentage, track fat loss

BMI: Check your healthy range

Bone Mass %: Check your bone mass percentage

Body Water %: Check your body water percentage

BMR: Check your basal metabolic rate

Visceral Fat %: Check your visceral fat percentage

Warning

This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities of lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and any understand

the hazards involved. Children shall not be play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

This product will send the measurement data only after the completion of the human body

measurement

How to use

1. Make sure the power supply is normal before using the smart health scale.

2. When a user stands barefoot on the smart health scale ( face the direction of smart health scale

display with each foot stepping on the ITO film of the smart health scale), once the body weight is

more than 5kg, the smart health scale will start measuring weight and body resistance and

display weight on the screen. The smart health scale will automatically turn off five seconds after

the user stepping off the scale.

3. When the smart health scale is on, switch weight unit (kg, lb, St) by pressing the Reset button

on the back of the scale .

4. When the smart health scale is off, press and hold the Reset button for 5 seconds or more, the

smart health scale enters configuration status, and then the user can bind smart health scale to the

app.

Specifications

Name: Bluetooth Wi-Fi Smart Scale

Model: Koogeek-S1

Users: Up to16 users

Measuring Range: 5kg-150kg

Function: Measuring weight, BMI, body fat, body water, lean mass, bone mass, visceral fat, BMR

Power Supply: 4 * AA Battery

Size: 315mm * 315mm * 29 mm

Weight: 2.5kg

Wireless: Bluetooth 4.0, Wi-Fi

Display Screen: LED (Blue)

Color: White

Supported System: Android, iOS

Compatible iOS devices: iOS 8.0 or above

Compatible Android devices: Android 4.3 or above

Operating Temperature: 0°C to 56°C

Relative Humidity: 0-95%

Material: ITO tempered glass +ABS

APP Introduction

1. APP Download Website: www.koogeek.com

2. APP Installation: For Android mobile phones, please download the app through the official web

site, and install directly on the phone; For iOS mobile phones, please download through app store

and install the app.

3. APP Instructions

3.1 When installing the app for the first time, the user needs to register a new user account and log

in.

3.2 Choose the smart health scale in the device list on the app, when a user stands on the smart hea

lth scale, it can be connected via Bluetooth with the app on the smart phone and the app can get m

easuring results and calculate the eight groups of health data.

POWER

Battery: 4xAA batteries

SWITCH OFF OR AUTO OFF

1，After finish weighing or if no any operation of the scale, the scale will automatically

switch off after approximate 30 seconds.

LOW BATTERY INDICATOR

When the battery power is low, scale will display "Lo", please replace the battery in time.

ATTENTION

1，Place the scale on a hard and flat surface to ensure the greatest accuracy and

reliability.

2，Do not use any chemical cleanser to clean the scale. Clean your scale with a damp

cloth, but do not immerge your scale into any liquid, as this can damage the inner

parts.

3，To ensure that the scales of life, please do not over-heat scale placed in the

environment.

4，Remove the batteries if the scale is not being used for a long time.

5，Treat your scale with care. It’s a precision instrument, do not drop it or jump on it.

Don’t put the object over 150% of the max capacity on the plate.

6，If the scale doesn’t work, check whether the battery contact well with the contactor. If

the scale has been used for a long time, check whether the batteries need to be

replaced. If necessary, please contact the distributor or call our company.

7，This scale is only used in household for body weight measurement, not for

commercial or other use

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved

by the party responsible for compliance could void the user’s authority to operate

this equipment.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment and it also complies with Part 15 of FCC RF Rules.

CAUTION

To comply with the limits of the Class B digital device, pursuant to Part 15 of the

FCC Rules, this device is comply with Class B limits. All peripherals must be shielded

and grounded. Operation with non-certified peripherals or non-shielded cables may

results in interference to radio or reception.

MODIFICATION

Any changes or modifications not expressly approved by the grantee of this device

could void the user’s authority to operate the device.

Annex of Report

Manufacturer’s Declaration of the EUT

(altogether 5 pages)

Guidance and manufacturer’s declaration – electromagnetic emission –

for all EQUIPMENT AND SYSTEMS

Guidance and manufacturer’s declaration – electromagnetic emission

The SF-371 body fat scale is intended for use in the electromagnetic environment specified below. The

customer or the user of SF-371 body fat scale should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment - guidance

RF emissions

CISPR 11

Group 1

The SF-371 body fat scale uses RF energy only for its internal

function. Therefore, its RF emissions are very low and are not

likely to cause any interference in nearby electronic equipment.

RF emissions

CISPR 11

Class B

The SF-371 body fat scale is suitable for use in all

establishments, including domestic establishments and those

directly connected to the public low-voltage power supply netw

ork

that supplies buildings used for domestic purposes.

Harmonic emissions

IEC 61000-3-2

N/A

Voltage fluctuations /

flicker emissions

IEC 61000-3-3

N/A

Guidance and manufacturer's declaration –electromagnetic immunity –

for all EQUIPMENT and SYSTEMS

Guidance and manufacturer’s declaration – electromagnetic immunity

The SF-371 body fat scale is intended for use in the electromagnetic environment specified below. The customer

or the user of the SF-371 body fat scale should assure that it is used in such an environment.

Immunity test

IEC 60601

test level

Compliance level

Electromagnetic environment -

guidance

Electrostatic

discharge (ESD)

IEC 61000-4-2

±6 kV contact

±8 kV air

±6 kV contact

±8 kV air

Floors should be wood, concrete or

ceramic tile. If floors are covered with

synthetic material, the relative

humidity

should be at least 30 %.

Electrostatic

transient / burst

IEC 61000-4-4

±2 kV for power

supply lines

±1 kV for input/output

lines

N/A

Mains power quality should be that of

typical commercial or hospital

environment.

Surge

IEC 61000-4-5

±1 kV differential

mode

±2 kV common mode

N/A

Mains power quality should be that of

typical commercial or hospital

environment.

Voltage dips,

short

interruptions and

voltage variations

on power supply

input lines

IEC 61000-4-11

<5 % UT

(>95 % dip in UT)

for 0.5 cycle

40 % UT

(60 % dip in UT)

for 5 cycles

70 % UT

(30 % dip in UT)

for 25 cycles

<5 % UT

(>95 % dip in UT)

for 5 sec

N/A

Mains power quality should be that of

typical commercial or hospital

environment. If the user of the

SF-371 body fat scale requires

continued operation during power

mains interruptions, it is

recommended that the SF-371 body

fat scale be powered from an

uninterruptible power supply or a

battery.

Power frequency

(50/60 Hz)

magnetic field

IEC 61000-4-8

3 A/m

Power frequency magnetic fields

should be at levels characteristic of a

typical location in a typical

commercial or hospital environment.

NOTE UT is the a. c. mains voltage prior to application of the test level.

Guidance and manufacturer’s declaration – electromagnetic immunity –

for EQUIPMENT and SYSTEM that are not LIFE-SUPPORTING

Guidance and manufacturer’s declaration – electromagnetic immunity

The SF-371 body fat scale is intended for use in the electromagnetic environment specified below. The customer or

the user of the SF-371 body fat scale should assure that it is used in such an environment.

Immunity test

IEC 60601 test

level

Compliance level

Electromagnetic environment - guidance

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

3 Vrms

150 kHz to 80 MHz

3 V/m

80 MHz to 2.5 GHz

N/A

3 V/m

Portable and mobile RF communications equipment

should be used no closer to any part of the SF-371 body

fat scale , including cables, than the recommended

separation distance calculated from the equation

applicable to the frequency of the transmitter.

Recommended separation distance

5.3



5.3



80 MHz to 800 MHz



800 MHz to 2.5 GHz

where pis the maximum output power rating of the

transmitter in watts (W) according to the transmitter

manufacturer and dis the recommended separation

distance in metres (m).b

Field strengths from fixed RF transmitters, as determined

by an electromagnetic site survey,a should be less than the

compliance level in each frequency range.b

Interference may occur in the vicinity of equipment

marked with the following symbol:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic is affected by absorption and reflection from structures,

objects and people.

aField strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios,

amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the

electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field

strength in the location in which the SF-371 body fat scale is used exceeds the applicable RF compliance level above, the

SF-371 body fat scale should be observed to verify normal operation. If abnormal performance is observed, additional measures

may be necessary, such as reorienting or relocating the SF-371 body fat scale .

bOver the frequency range 150 kHz to 80 MHz, field strengths should be less than 3V/m.

Recommended separation distances between portable and mobile

RF communications equipment and the EQUIPMENT or SYSTEM -

for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING

Recommended separation distances between

portable and mobile RF communications equipment and the SF-371 body fat scale

The SF-371 body fat scale is intended for use in an electromagnetic environment in which radiated RF disturbances are

controlled. The customer or the user of the SF-371 body fat scale can help prevent electromagnetic interference by

maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the SF-371 body

fat scale as recommended below, according to the maximum output power of the communications equipment

Separation distance according to frequency of transmitter

Rated maximum

output of

transmitter

150 kHz to 80 MHz

5.3



80 MHz to 800 MHz

5.3



800 MHz to 2.5 GHz



0.01

0.12

0.23

0.1

0.38

0.73

1.2

2.3

3.8

7.3

100

For transmitters rated at a maximum output power not listed above the recommended separation distance d in metres

(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output

power rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and

reflection from structures, objects and people.

Table of contents

Other KOOGEEK Scale manuals

KOOGEEK

KOOGEEK SG1 User manual

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual