Kogan KABNCTPDW8B User manual
BENCHTOP DISHWASHER
(8 PLACE SETTINGS)
KABNCTPDW8B
2
Safety & Warnings
3
Overview
5
Installation
8
Operation
10
Cleaning & Care
16
Troubleshooting
19
Notes
22
3
• Read all instructions before using the appliance and retain for reference.
• Handle with care and inspect regularly to ensure the product is in good working
condition.
• If this product, power supply cord or plug shows any sign of damage: stop use, unplug
the product and contact Kogan.com support.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• This appliance is designed for consumer use: follow directions and use only as
described. This appliance is intended to be used in household and similar applications,
such as staff kitchen areas in shops, offices and other working environments,
farmhouses, by clients in hotels, motels and other residential type environments and
bed and breakfast type environments.
• To protect against the risk of electrical shock, do not immerse the unit, cord or plug in
water or other liquid.
• Do not abuse, sit on or stand on the door or dish rack of the dishwasher.
• Do not operate your dishwasher unless all enclosure panels are properly in place.
• Open the door very carefully if the dishwasher is operating, there is a risk of water
squirting out.
• Do not place any heavy object on or stand on the door when it is open. The appliance
could tip forward.
• When loading items to be washed:
o Locate sharp items so that they are not likely to damage the door seal
o Warning: Knives and other utensils with sharp points must be loaded in the
basket with their points down or placed in a horizontal position
• Check that the detergent powder is empty after completion of the wash cycle. Do not
wash plastic items unless they are marked dishwasher safe or the equivalent.
• Use only detergent and rinse additives designed for an automatic dishwasher. Never
use soap, laundry detergent or hand washing detergent in your dishwasher.
• Children should be supervised to ensure that they do not play with the appliance.
• The door should not be left open, since this could increase the risk of tripping.
• During installation, the power supply must not be excessively or dangerously bent or
flattened.
• Do not tamper the controls.
SAFETY & WARNINGS
4
• The appliance is to be connected to the water mains using new hose sets and that old
hose sets should not be reused.
• The maximum number of place settings to be washed is 8.
• The maximum permissible inlet water pressure is 1MPa and the minimum permissible
inlet water pressure is 0.04MPa.
• Unplug before cleaning the appliance. Use a soft cloth moistened with mild soap and
then use a dry cloth to wipe it again.
• Do not use with an extension cord unless necessary and if so, ensure it is suitably rated
and handled safely.
• Do not allow the power cord to be exposed to water, heat, direct sunlight or overhang
where it can be pulled or otherwise be damaged or pose a hazard.
• This appliance contains no user-serviceable parts. If it suffers any failure or damage,
cease usage and contact help.Kogan.com for support after consulting the
Troubleshooting section of this manual.
5
Step 1
Switch on the appliance
Press the Power switch button to switch on the appliance
and open the door.
Step 2
Fill the detergent
dispenser
Compartment A
With each wash cycle.
Compartment B
For programmes with pre-
wash only.
Step 3
Check the rinse aid level
Mechanical indicator C
Electric indicator on control panel.
Step 4
Load the baskets
Scrape off any large amount of leftover food. Soften
remnants of burnt food in pans and then load the baskets.
It is not necessary to rinse the dishes under running water.
Step 5
Select a programme
Close the door. Press the programme button until the
selected programme lights up.
(See the “Operation” section)
Step 6
Running the dishwasher
Turn on the water tap and press the Start/Pause button.
The machine will start working after about 10 seconds.
Step 6a
Changing the programme
A running cycle can only be modified if it has been running
for a short time. Otherwise the detergent may have
already been released and the water already drained. If
this is the case, the detergent dispenser must be refilled.
Press the Start/Pause button and then press the
programme button for more than 3 seconds to cancel the
running programme.
Select a new programme.
Restart the dishwasher.
OVERVIEW
6
Step 6b
Add forgotten dishes in
the dishwasher.
Press the Start/Pause button to stop the machine.
Open the door.
Add the forgotten dishes.
Close the door, then press the Start/Pause button. The
dishwasher will start running again.
WARNING! Open the door carefully. Hot steam may
escape when the door is opened!
Step 6c
If the appliance is
switched off during a wash
cycle.
If the appliance is switched off during a wash cycle and
when switching on again, please re-select the washing
cycle.
Step 7
Switch off the appliance
When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the Power button.
Since the appliance is standing by, it will power off
automatically after 30 minutes without any operation.
Step 8
Turn off the water tap,
unload the baskets
Warning: Wait for few minutes (about 15 minutes) before
unloading the dishwasher to avoid handling the dishes and
utensils while they are still hot and more susceptible to
break. They will also dry better. Unload the appliance,
starting from the lower basket.
7
1
Detergent dispenser
5
Cup shelf
2
Filter assembly
6
Basket
3
Rinse aid dispenser
7
Inlet pipe connector
4
Spray arms
8
Drainpipe connector
Front view
Back view
8
Position the appliance in the desired location. The back should rest against the wall behind
it and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water
supply and drain hoses that can be positioned to the left or right to facilitate installation.
Cold water connection
Connect the cold-water supply hose to a threaded ¾"connector and ensure that it is
fastened tightly in place. If the water pipes are new or have not been used for an extended
period of time, let the water run to make sure that the water is clear and free of impurities. If
this precaution is not taken, there is a risk that the water inlet can get blocked and damage
the appliance.
INSTALLATION
Note: The top of the hose must
be less than 750mm.
Counter
Front
MAX
750mm
φ40mm
Drainpipe
Note:
A and B in the image are alternate suitable positions for the drainage hose.
9
Drainage hose
Insert the drainage hose into a drainpipe with a minimum diameter of 4cm or let it run into
the sink, making sure to avoid bending or crimping it. The free end of the hose must be at a
height less than 75cm and must not be immersed in water to avoid backflow.
Pre-use checklist
• Dishwasher is level and fixed properly.
• Inlet valve is open.
• Inlet hose connections are fully tightened and not leaking.
• Wires are tightly connected.
• Power is switched on.
• Inlet and drain hoses are connected securely.
• All packing materials and printings are removed from the dishwasher.
10
Before use, add rinse aid and detergent.
Rinse aid dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on
dishes, which can leave spots and streaks. It also improves drying by allowing water to roll
off the dishes. The dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is
located inside the door next to the detergent dispenser. To fill the dispenser, open the cap
and pour the rinse aid into the dispenser until the level indicator turns completely black. The
capacity of the rinse aid container is about 110ml.
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing and spot
and streak free drying.
WARNING: Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with
any other substance (e.g. dishwasher cleaning agent and liquid detergent).
Fill gauge
Full
¾full
½full
¼full - Should refill to eliminate spotting
Empty
OPERATION
C (Rinse aid indicator)
Table of contents
Other Kogan Dishwasher manuals
