Kodak Pixpro AZ651 User manual

User Manual

Declaration of Conformity

Responsible Party: JK Imaging Ltd.

Address: JK Imaging Ltd., 17239 South Main Street, Gardena, CA 90248, USA

JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK

Company Website: www.kodakpixpro.com

INDUSTRY CANADA

This device complies with Canadian RSS-210.

This device complies with Industry Canada license-exempt RSS standard (s).Operation is subject

to the following two conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:

This product complies with the Canadian portable RF exposure limit set forth for an uncontrolled

environment and is safe for intended operation as described in this manual. Additional RF exposure

reduction can be achieved if the product can be kept as far as possible from the user body or set the

device to lower output power if such function is available.

BEFORE YOU START

For Customers in Europe

This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection of

electrical waste and electronic equipment in the European countries. Please do not throw

the equipment into domestic refuse. Please use the return and collection systems available

in your country for proper, safe disposal of this product.

“CE” mark indicates that this product complies with the European requirements for safety,

health, environment and customer protection. “CE” marked cameras are intended for sales

in Europe.

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The

following test methods have been applied in order to prove presumption of conformity with

the essential requirements of the R&TTE Directive 1999/5/EC:

- EN 60950-1: 2006+A11:2009 +A1:2010 +A12:2011

Safety of Information Technology Equipment

- EN 50566: 2013

Product standard to demonstrate compliance of radio frequency fields from handheld and

body- mounted wireless communication devices used by the general public (30 MHz — 6

GHz)

- EN 62209-2: 2010

Human exposure to radio frequency fields from handheld and bodymounted wireless

communication devices — Human models, instrumentation, and procedures

Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication

devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)

- EN 300 328 V1.8.1 : 2012

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission

systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread

spectrum modulation techniques; Harmonized EN covering essential requirements under

article 3.2 of the R&TTE Directive.

- EN 301 489-1 V1.9.2: 2011

Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electro Magnetic

Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical

requirements.

- EN 301 489-17 V2.2.1:2012

Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic

Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions

for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.

For Customers in the U.S.A.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Radiation Exposure Statement:

This product complies with the FCC portable RF exposure limit set forth for an uncontrolled

environment and is safe for intended operation as described in this manual. Additional RF exposure

reduction can be achieved if the product can be kept as far as possible from the user body or set the

device to lower output power if such function is available.

About this Manual

Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual carefully

and keep it in a safe place for future reference.

JK Imaging Ltd. reserves all rights of this document. No part of this published manual may be

reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language

or computer language, in any form, by any means, without the prior written permission of JK

Imaging Ltd..

All trademarks mentioned in this manual are used for identification purposes only and are

properties of their respective owners.

This manual will instruct you on how to operate the KODAK PIXPRO Digital Camera. JK Imaging

Ltd. has tried its utmost to ensure the correctness of the user manual contents, but reserves the

right to modify as necessary. All of these contents are subject to change without prior notice.

Throughout this manual, the following symbols are used to help you locate information quickly

and easily:

Indicates useful information.

Indicates precautions are to be taken while operating the camera.

In the instructions below, the following symbols may be used throughout this manual on how to

operate the camera. This is to facilitate better understanding.

「Item properties」： The optional properties in the camera interface are indicated by the

symbol「」.

SAFETY NOTES

Safety notes for this camera

Do not drop the camera or allow it to hit

solid objects.

Do not attempt to disassemble or repair the

camera.

Do not use or store the camera in dusty

places or on a beach to prevent dust or sand

from entering the camera, causing possible

damage to it.

Do not use or store the camera in a hot

environment or under direct sunlight.

Do not use or store the camera near a

powerful magnetic field, for example near a

magnet or transformer.

Avoid touching the lens of the camera.

Do not expose the camera to direct sunlight

for a long period of time.

To prevent the camera from being damaged

by moisture, do not use or store the camera

in very humid environments, such as in rain or

near bodies of water.

If water accidentally comes in contact with

the camera, turn the camera off, remove

the battery and the memory card, and dry it

within 24 hours.

When you take the camera from a cold place

to a warmer environment, condensation may

occur. Please wait for a reasonable period of

time before you turn it on.

Before you remove the battery and memory

card, the camera should be turned off.

When you clean the body of the camera, do

not use abrasive, alcohol-based or organic

cleaner.

Use a professional lens wiping cloth and

dedicated cleaner to wipe and clean the

lens.

Download your photos and remove the

memory card when you are going to store

the camera for a long period of time.

If this camera is not in use for a long time,

please keep it in a dry and clean condition.

Our company will not pay compensation for

any failure of playback of pictures or videos

caused by improper operation.

Safety notes for battery

Please use a battery that is the same type

as the one included.

Please use the attached charger to charge

the battery.

If battery fluid leaks inside the camera,

contact our customer service department. If

battery fluid leaks onto your skin, rinse your

skin with clean water and seek immediate

medical attention.

Disposal of used batteries should be carried

out in accordance with the local (national or

regional) regulations.

To prevent the battery from being damaged,

do not drop the battery or allow it to hit

solid objects or to be scratched by the

objects.

Do not let the battery come in contact with

metal objects (including coins) to avoid

short circuiting, discharging, excessive heat,

or possible leakage.

Do not attempt to disassemble the battery.

Do not expose the battery to water. Always

keep the battery contacts dry.

Do not heat the battery or throw it into a

fire to avoid a possible explosion.

Do not store the battery in a hot environment

or in direct sunlight.

If the battery overheats during charging

or use, stop charging or use immediately.

Turn off the product, remove the battery

carefully, and wait until it cools down.

When the camera is stored for a long period

of time, remove the battery and keep it in

a dry place that is not accessible to infants

and children.

In a colder environment, the performance of

the battery could be noticeably reduced.

When you install the battery, install it

according to the positive and negative

markings on the battery compartment.

Never force it into the battery

compartment.

Safety notes for memory card

We suggest buying only well-known,

name brand memory cards to ensure peak

performance.

Format the memory card using the camera

before you use it or insert a new one.

Do not drop the memory card or allow it to

hit solid objects to avoid damaging it.

Do not attempt to disassemble or repair the

memory card.

Do not expose the memory card to water.

Always keep it dry.

Do not remove the memory card when

the camera is turned on. Otherwise, the

memory card could be damaged.

Do not directly edit the data on the memory

card. Copy the data to your PC before you

edit them.

When the camera is stored for a long period

of time, be sure to download your photos

and remove the memory card. Store it in a

dry environment.

Do not modify the name of the files or

folders of the memory card using your PC.

Modifying the file names may cause the

files to not be recognized on the camera or

a possible error may occur.

A photo taken with the camera will be

stored in the folder that is automatically

generated on the memory card. Do not

store photos that are not taken using this

camera in these folders as the pictures

cannot be recognized during the playback.

When you insert a memory card, make sure

the notch of the card matches the markings

on the top of the card slot.

Other Safety Notes

Do not disconnect the power or turn the camera off during the update process. Doing so may

cause incorrect data to be written and the camera may not power on later.

Do not hang the neck strap of the camera around the neck of a child.

When using your camera on an airplane, observe the relevant rules specified by the airline.

Due to the limitations of manufacturing technology, the LCD may have a few dead or bright

pixels. These pixels do no effect the quality or performance of the camera, photos or video.

Do not expose the LCD to water. In a humid environment, only wipe it with a soft and dry

cleaning cloth.

If the LCD is damaged and the liquid crystal comes into contact with your skin, wipe your skin

with a dry cloth immediately and rinse it with clean water. If liquid crystal comes into contact

with your eyes, wash them with clean water at least for 15 minutes and seek immediate medical

attention. If you accidentally swallow liquid crystal, rinse your mouth immediately and seek

medical attention.

Other manuals for Pixpro AZ651

Table of contents

Other Kodak Digital Camera manuals

Kodak

Kodak M863 - MANUALE PER L'UTENTE COMPLETO User manual

Kodak

Kodak EASYSHARE SPORT C123 User manual

Kodak

Kodak P712 - Easyshare 7.1MP Digital Camera User manual

Kodak

Kodak MD41 - EasyShare 12.0MP Digital Camera User manual

Kodak

Kodak EasyShare CX6200 User manual

Kodak

Kodak EasyShare C530, User manual

Kodak

Kodak EasyShare M1073 IS Service manual

Kodak

Kodak DCS 200 User manual

Kodak

Kodak MD41 - EXTENDED GUIDE Service manual

Kodak

Kodak DIGITAL SCIENCE DC210 Plus Zoom User manual

Kodak

Kodak EASYSHARE CD44 User manual

Kodak

Kodak Signet 40 User manual

Kodak

Kodak C633 - Easyshare Printer Dock Series 3 User manual

Kodak

Kodak EASYSHARE M550 User manual

Kodak

Kodak M580 - EXTENDED Service manual

Kodak

Kodak C633 - Easyshare Printer Dock Series 3 User manual

Kodak

Kodak EasyShare C340 User manual

Kodak

Kodak P712 - Easyshare 7.1MP Digital Camera User manual

Kodak

Kodak 6B8773 User manual

Kodak

Kodak C182 - EASYSHARE Digital Camera User manual

Kodak

Kodak Z1285 - EASYSHARE Digital Camera User manual

Kodak

Kodak Advantix 3700ix User manual

Kodak

Kodak Z740 Series User manual

Kodak

Kodak STEP Touch User manual

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

Sanyo

Sanyo VPC-S1085 instruction manual

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Nikon

Nikon COOLPIX A Reference manual

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE J1470S user manual

Sony

Sony A6700 Startup guide

Canon

Canon EOS ELAN7 instructions