KOBE Brillia Series Troubleshooting guide

KOBE Range Hoods

Brillia Series

Model No. / N

de modèles / Modelo No.

ISX2130SQB-1 (30”)

ISX2136SQB-1 (36”)

ISX2142SQB-1 (42”)

INSTALLATION INSTRUCTIONS

AND OPERATION MANUAL

MANUEL D'INSTALLATION

ET MODE D'EMPLOI

INSTRUCCIONES DE INSTALACIÓN

Y MANUAL DE OPERACIÓN

[ENGLISH] .................................................................................................1

[FRENCH] ................................................................................................21

[SPANISH]................................................................................................41

IMPORTANT

READ THIS FIRST

READ BEFORE INSTALLATION

1. Carefully check all contents of packages.

2. Thoroughly inspect the unit for any shipping damages, cosmetic

damages or defects.

3. Have a certified contractor/electrician test the unit before installation.

IF THERE IS ANY PROBLEM:

1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL

PACKAGING MATERIAL.

2. Have your original invoice as proof of purchase and product serial

number ready.

3. Contact your merchant for product replacement due to shipping

damages, cosmetic damages or defects.

4. For all other issues, call 1-877-BUY-KOBE (289-5623), or e-mail to

[email protected] .

NO RETURN, NO REFUND, NO EXCHANGE IF:

1.PRODUCT HAS BEEN INSTALLED

2.KNOCK-OUT HOLES HAVE BEEN

PUNCTURED

3.MISSING ORIGINAL PACKAGING

MATERIAL AND/OR PARTS

[ENGLISH]

- READ AND SAVE THESE INSTRUCTIONS -

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS.................................................................................... 3

COMPONENTS OF PACKAGE.................................................................................................. 5

INSTALLATION.......................................................................................................................... 6

OPERATING INSTRUCTIONS..................................................................................................10

MAINTENANCE........................................................................................................................11

SPECIFICATIONS ....................................................................................................................12

MEASUREMENTS & DIAGRAMS.............................................................................................13

PARTS LIST..............................................................................................................................14

CIRCUIT DIAGRAM..................................................................................................................16

TROUBLE SHOOTING.............................................................................................................17

WARRANTY .............................................................................................................................18

WARRANTY INFORMATION FORM.........................................................................................20

- READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING -

ALL W I RI NG MUS T B E DO NE BY A P RO FESSI ONA L AND IN

AC CORDA NCE W ITH NAT I ONAL AND LO CAL E LEC T RI CAL CO D ES

IMPORTANT SAFETY INSTRUCTIONS

- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -

WARNING

: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY,

OBSERVE THE FOLLOWING:

1) Installation and electrical wiring must be done by qualified professionals and in accordance with all

applicable codes and standards, including fire-rated construction.

2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden

utilities.

3) Ducted fans must be vented to the outside.

a) Before servicing or cleaning unit, open the light panel and SWITCH POWER OFF AT SERVICE

PANEL.

b) Clean all grease laden surfaces frequently. To reduce the risk of fire and to disperse air properly,

make sure to vent air outside. DO NOT vent exhaust air into wall spaces, attics, crawl spaces or

garages.

NOTE - This warranty is void without an authorized agent’s receipt or if unit is

damaged due to misuse, poor installation, improper use, mistreatment,

negligence or any other circumstances beyond the control of KOBE

authorized agents. Any repair carried out without the supervision of

KOBE authorized agents will automatically void the warranty.

- KOBE will not be held responsible for any damages to personal property

or real estate or any bodily injuries whether caused directly or indirectly

by the range hood.

WARNING

: TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A RANGE

TOP GREASE FIRE:

1. Keep all fan, baffle/spacer/filter/oil tunnel/oil container and grease-laden surfaces clean. Grease

should not be allowed to accumulate on fan, baffle/spacer/filter/oil tunnel/oil container.

2. Always turn hood ON when cooking.

3. Use high settings on cooking range ONLY when necessary.

4. Do not leave cooking range unattended when cooking.

5. Always use cookware and utensils appropriate for the type and amount of food prepared.

6. Use this unit only in the manner intended by the manufacturer.

7. Before servicing, switch power off at service panel and lock service panel (if possible) to prevent

power from switching on accidentally.

8. Clean ventilating fan frequently.

What to Do In The Event Of a Range Top Grease Fire

• SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner.

KEEP FLAMMABLE OR COMBUSTIBLE MATERIALAWAY FROM FLAMES. If the flames do not go

out immediately, EVACUATE THE AREAAND CALL THE FIRE DEPARTMENT or 911.

• NEVER PICK UPA BURNING PAN – You May Get Burned.

• DO NOT USE WATER, including wet dishcloths or towels – a steam blast will result.

• Use an extinguisher ONLY if:

a) You have a Class A, B, C extinguisher and know how to operate it.

b) The fire is small and contained in the area where it started.

c) The fire department has been called.

d) You can fight the fire with your back to an exit.

What to Do If You Smell Gas

Extinguish any open flame.

Do not try to turn on the lights or any type of appliance.

Open all doors and windows to disperse the gas. If you still smell gas, call the Gas Company and

Fire Department right away.

CAUTION

1) For general ventilation use only. Do not use to exhaust hazardous or explosive materials and vapors.

2) To reduce the risk of fire, use only metal ductwork. Sufficient air is needed for proper combustion and

exhausting of gases through the flue (chimney) to prevent back drafting.

3) Follow the heating equipment manufacturer’s guideline and safety standards such as thosepublished

by the National Fire Protection Association (NFPA), and the American Society for Heating,

Refrigeration and Air Conditioning Engineers (ASHRAE), and code authorities.

4) Activating any switch on may cause ignition or an explosion.

5) Due to the size and weight of this hood, installation by 2 persons is recommended.

ELECTRICAL SHOCK HAZARD – Can result in serious injury or death.

Disconnect appliance from electric power before servicing. If equipped,

the fluorescent light bulb contains small amounts of mercury, which must

be recycled or disposed of according to Local, State, and Federal Codes.

COMPONENTS OF PACKAGE

(Must keep all material for returns or refunds)

Range Hood Box (Box 1 of 2)

Duct Cover Box ( Box 2 of 2)

{A}

Brillia Range Hood – 1

{B} Warranty Registration Card – 1

{C} Quick Reference Guide – 1

{D} Baffle Filters – 2 (30” hood)

– 3 (36” & 42” hood)

{E} Mounting Template – 1

{A}

{B} {C}

{D} {E}

{F} Duct Cover – 1

{G} Telescopic Stack – 1

{H} Motor Casing – 1

{I} 6” Round Plastic Exhaust – 1

{J} Screws Package – 1

{K} Screws Package

{L} Wire Cap – 3

{F}

{G}

{H} {I}

{J} {K}

{L}

FOR MORE INFORMATION, PLEASE VISIT OUR WEBSITE www.koberangehoods.com OR

CONTACT KOBE RANGE HOODS AT (626) 775-8880.

Knobs attached

to baffle filter

3/16” x 3/8” (8PCS)

4 x 8mm (14PCS)

M4 x 1-1/2” (10)

Wire caps (3)

INSTALLATION

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING

Calculation before Installation

To calculate installation, please refer to TABLE 1. (All calculation in inches.)

TABLE 1

A = Height of Floor to Ceiling

B = Height of Floor to Counter Top

(Standard:36”)

C = Preferred Height of Counter Top to Hood

Bottom (Recommended 30” to 36”)

D = Height of Hood

E = Height of the Hood Installation

[A – (B+C)]

F = Height of Duct Cover

[E – D]

SAFETY WARNING

HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF

REMOVING ANY PARTS FOR INSTALLING, CLEANING OR SERVICING.

NOTE: BE CAREFUL WHEN USING ELECTRICAL SCREWDRIVER, DAMAGE TO THE HOOD MAY

OCCUR.

Preparation before Installation

NOTE: TO AVOID DAMAGE TO YOUR HOOD,

PREVENT DEBRIS FROM ENTERING THE

VENT OPENING.

•Decide the location of the venting pipe fromthe hood

to the outside (Figure 1).

•A straight, short vent run will allow the hood to

perform more efficiently.

•Try to avoid as many transitions, elbows, and long

runs as possible. Transitions, elbows, and/or long

runs may reduce the performance of the hood.

•Temporarily wire the hood to test for proper

operation before installing.

•Important: Peel protective film off the hood and

product covers, if any.

•Use duct tape to seal the joints between pipe

sections.

Island Installation

CAUTION: USE HAND TOOLS ONLY. DO NOT

OVER TIGHTEN SCREWS. IT MAY CASUE

DAMAGE TO THE HOOD.

CAUTION: If moving the cooking range is

necessary to install the hood, turn off the

power in an electric range at the main electrical

box. SHUT OFF THE GAS BEFORE MOVING A

GAS RANGE.

And use a protective covering to protect cooktop

and/or countertop from damage.

1. Mark centerline of cook top or range on ceiling. Use

centerline marked on ceiling to position the range

hood as shown in Figure 2.

2. Cut and remove ceiling drywell. Install 2” x 4” cross

framing lumber (not provided) between ceiling joists.

3. Framing should be 11-2/16” (O.C. = on center)

between front and back, and 10-3/16” (O.C.)

between both sides of the 2” x 1” cross framing

lumber. Refer to Figure 3.

4. Finish the ceiling surface. Be sure to mark the

location of the ceiling joists and cross framing

lumber.

5. Cut a 6-1/2” duct opening and approximately a 1”

wire access hole.

Figure 1

Figure 2

Figure 3

Telescopic Stack Installation

6. Adjust the telescopic stack with the screws provided

to the desired height. Refer to Table 1 and Figure

4. (Lower screws must be drilled into the metal

motor housing.)

7. Place only the inner duct cover over the top of the

telescopic stack prior to mounting to the ceiling and

let it rest on the bottom flanges.

8. Align the telescopic stack to the mounting surface

and secure ten hood mounting screws (provided)

into the ceiling joist and cross framing lumber. Make

sure screws are driven into the ceiling at the middle

of joists and cross framing lumber for maximum

support and stability.

CAUTION: MAKE SURE THE TELESCOPIC

STACK IS SECURE BEFORE RELEASING.

Wiring to Power Supply

THIS RANGE HOOD MUST BE PROBERLY

GROUNDED. MAKE SURE THIS IS DONE BY

QUALIFIED ELECTRICIAN IN ACCORDANCE

WITH ALL APPLICABLE NATIONAL AND

LOCAL ELECTRICAL CODES. BEFORE

CONNECTING WIRES, SWITCH POWER OFF

AT SERVICE PANEL AND LOCK SERVICE

PANEL TO PREVENT POWER FROM BEING

SWITCHED ON ACCIDENTALLY.

9. Route house wiring into the ceiling as close to the

installation location as possible. Allow additional

length of wiring to drop down from the ceiling to the

electric box.

10. Connect the electrical wires according to color

(green to green, white to white, and black to black)

and cap with wire connectors. Green wire must be

grounded to reduce risk of electric shock.

Ductwork Installation

11. Use 6” round aluminum or steel pipe (not provided)

to connect to the plastic collar.

12. Slide the outer duct cover downward so that it slits

properly on the hood.

13. Fasten the inner duct cover in place with 4 screws

(provided). Refer to Figure 5.

14. Slide the outer duct cover up the telescopic stack,

and temporarily hold or fasten in place.

Figure 4

Figure 5

Other manuals for Brillia Series

This manual suits for next models

Table of contents

Languages:

Other KOBE Ventilation Hood manuals

KOBE

KOBE BRILLIA INX-026 Troubleshooting guide

KOBE

KOBE CH0042SQB-1 Troubleshooting guide

KOBE

KOBE IS2430GSQB-1 Troubleshooting guide

KOBE

KOBE RA3830SQ Troubleshooting guide

KOBE

KOBE RA3830SQ Troubleshooting guide

KOBE

KOBE RA3830SQ Troubleshooting guide

KOBE

KOBE RA3830S Troubleshooting guide

KOBE

KOBE CH0330SQB Troubleshooting guide

KOBE

KOBE RAX9430SQB-2 Troubleshooting guide

KOBE

KOBE CH8136SQ Troubleshooting guide

KOBE

KOBE RA9236SQ Troubleshooting guide

KOBE

KOBE CH-20 Series Troubleshooting guide

KOBE

KOBE CHX7930SQB-1 User manual

KOBE

KOBE RA0230SQB-DC-5 Troubleshooting guide

KOBE

KOBE RA9230SQB-DC30-1 Troubleshooting guide

KOBE

KOBE CHX20 Troubleshooting guide

KOBE

KOBE CHX30 Series Troubleshooting guide

KOBE

KOBE RA9430SQB-1 Use and care manual

KOBE

KOBE RA3830SQD Troubleshooting guide

KOBE

KOBE CH27 Series User manual

KOBE

KOBE IN2636SQB-1 Troubleshooting guide

KOBE

KOBE INX29 SQBF-500-1 Series Use and care manual

KOBE

KOBE CH7930SQ Troubleshooting guide

KOBE

KOBE CH9730SQB Troubleshooting guide

Popular Ventilation Hood manuals by other brands

emmeti

emmeti RECUPA MED A-140 Installation and use manual

Nibe

Nibe F135 user manual

Kuppersberg

Kuppersberg INTRO 60 Technical Passport

Zephyr

Zephyr Spruce AK9834BS Use, care and installation guide

Hisense

Hisense MH6INBG manual

Miele

Miele DA 1255 Operating and installation instructions

Broan

Broan 46000 Specification sheet

GE Profile PV977 Owner's Manual & Installation Instructions

FALMEC

FALMEC FFRIA24W5FS Instruction booklet

Whirlpool

Whirlpool RH2600XL-1 SERIES installation instructions

Küppersbusch

Küppersbusch DX ISLA instruction manual

ETNA

ETNA AV360RVS Instructions for use

JUNO

JUNO JDF603E6 installation manual

Miele

Miele DA 6708 D Operating and installation instructions

Tricity Bendix

Tricity Bendix LE 150 Installation & operating instructions

AEG

AEG X68163BV1 user manual

AEG

AEG 125 D operating instructions

Smeg

Smeg KSEV97X instruction manual