Kiwi 2 User manual
EN
Welcome to the world of KIWI! Congratulations,
as of today, you are part of a community
founded on important values that the KIWI
team constantly develops. Our goal is to oer
alternative solutions for your health, quality of
life, and sustainable development. This user
manual contains all the information you need
to use your device correctly.
Model: KIWI 2
Battery type: Li-ion rechargeable battery
Powerbank capacity: 1800mAh
Pen capacity: 400mAh
Powerbank USB-C input: DC5V/2A
Pen USB-C input: DC5V/0.5A
Powerbank for Pen charging: ≈4 times
(0-100% power)
Tank volume: 1.8ml
Working temperature: 0°C~45°C
1. PRODUCT DETAILS
Magnetic contact pin
01
2. INSTRUCTIONS FOR FIRST USE
So Touch
button
Magnetic
contact pin
Power indicator
USB–C
Magnetic contact pin USB-C
Power indicatorPod
Start using the Pod by opening the Child proof
protection. To open the Pod pull the metal part
downwards. Aer the protection has been
lowered, li the silicone cap of the Pod.
1
02
Insert the Pod into the Pen. The white light will
illuminate once, followed by a quick vibration
three times. Insert a Tip and enjoy.
03
Take the Pen out of the pack and place it into
the Powerbank (or connect it to a USB-C for
charging). The Pen will vibrate once, and the "K"
LED will ash three times. The current battery
level is indicated by the color of the LED: white
indicates 10% to 100% power, while red
indicates 0% to 10% power.
PEN CHARGE LEVEL
3. PEN DEVICE FUNCTIONS
Fill the tank with liquid, cover it with the silicone
cap, and pull the metal shield to the right
position. Leave the Pod for around 5 minutes to
ensure that the liquid fully enters the Pod.
2
3
0-10% power：
Red LED lights up
10-100% power：
White LED lights up
PEN CHARGE LEVEL DURING USE
The "K" LED indicates the battery level during
the suction process as follows:
10% to 100% power: white LED light
5% to 10% power: red LED light
Below 5% power: Unable to vape, red LED
ashes three times and vibrates once,
indicating the need to charge.
5-10% power:
Red LED lights up 10-100% power:
White LED lights up
04
CHARGING THE PEN WITH THE
POWERBANK
CHARGING THE PEN WITH THE
USB-C CABLE
The indication of the Powerbank charging the
Pen is as follows:
0% to 10% power: red LED lights up
10% to 100% power: white LED lights up
Fully charged: LED light turns o
The indication for USB-C power-on is the current
power level indicator ashing three times and
vibrating once.
The USB-C charging indication is as follows:
0% to 10% power: red LED lights up
10% to 100% power: white LED lights up
Fully charged: LED light turns o
0-10% power:
Red LED lights up 10-100% power:
White LED lights up
0-10% power:
Red LED lights up 10-100% power:
White LED lights up
05
06
Insert and remove the Pod:
INDICATIONS FOR POD INSERTION AND
REMOVAL
SWITCHING THE SUCTION VIBRATION
MODE OF THE PEN
To turn on or o the suction vibration mode of
the Pen, follow these steps:
By default, the Pen is set to suction with vibration
mode. Plug and unplug the Pod ve times within
four seconds. If done correctly, the Pen will
switch its suction vibration mode.
When the mode is successfully switched, the
white light will ash for two seconds, accompa-
nied by the motor vibrating for two seconds.
In the suction vibration mode, there will be a
light vibration when suctioning.
Removal - The red "K" LED will ash once to
indicate the Pod has been successfully
removed.
Insertion - The white "K" LED will ash once
accompanied by three vibrations, indicating a
good contact.
PEN PROTECTION SYSTEMS
1. Overheating protection reminder: The blue
LED will light up ve times, accompanied by
three vibrations, indicating overheating and
serving as a reminder.
2. Indication for continuous suction for 8 seconds:
The red LED will light up eight times, accompanied
by one vibration, indicating that the device has
been in continuous suction for 8 seconds and it is
time to stop to prevent overheating.
3. Indication for short circuit or high temperature:
The red LED will light up ten times, accompanied
by two vibrations, indicating a heating element
issue such as short circuit, or high temperature. It is
necessary to stop heating immediately to prevent
any potential hazards.
4. Low power protection: If the power is too low,
either before starting the heating or during the
heating process, the red LED will light up three
times, the motor will vibrate once, and the heating
will automatically stop to protect the device.
20 PUFFS REMINDER
When the suction reaches 20 pus, the motor
will vibrate twice. The pu counter will reset
once the pus have been taken with a
10-minute interval between them.
07
INSTRUCTIONS FOR THE STATUS OF THE
POWERBANK
4.POWERBANK
Press the So Touch button on the top of the
Powerbank (or remove the Pen). The power
indicator will gradually illuminate and then
turn o.
1 LED lights up
0-25%
2 LED lights up
26-50%
3 LED lights up
51-75%
4 LED lights up
76-100%
When the power level is below 10%, the rst bar of
the power indicator will ash quickly for 10 times,
serving as a reminder to charge the device.
08
Table of contents
Languages:
Popular Electronic Cigarette manuals by other brands
STEAMAX
STEAMAX TFV8 X-BABY user manual
iQOS
iQOS 3 MULTI user guide
Vaporesso
Vaporesso LUXE XR MAX user manual
ZAZO
ZAZO PRO Mini 2 user manual
Aquafog
Aquafog Turbo XE User's manual and operating instructions
Electronic Cigarettes Australia Pty Ltd
Electronic Cigarettes Australia Pty Ltd AUSSIE BLUE ENDURANCE user manual
