KitchenAid 5KFP0921A User manual

9 Cup Food Processor

5KFP0921A

PARTS AND FEATURES

1Heavy-Duty Base

2Power Cord and Cord Storage

(not shown)

3Drive Pin

49-Cup (2.1 L) Work Bowl

5Handle Hinge

6Lid Hinge

7Work Bowl Cover with 2-in-1 Feed

Tube

8Lid Latch

92-Piece Food Pusher

10 Refrigerator Lid

11 Reversible Slice/Shredding Disk

12 Whisking Accessory

13 Dough Blade

14 Multi-Purpose Four Blade

15 Drive Adapter

O/P

ENGLISH

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always

be followed, including the following:

1. Read all instructions. Misuse of appliance may result in personal injury.

2. To protect against risk of electrical shock, do not put Food Processor in water

or other liquid.

3. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they are closely supervised and instructed concerning use

of the appliance by a person responsible for their safety. Close supervision is

necessary when any appliance is used by or near children. Children should be

supervised to ensure that they do not play with appliance.

4. Turn the appliance OFF, then unplug from the outlet when not in use, before

assembling or disassembling parts and before cleaning. To unplug, grasp the

plug and pull from the outlet. Never pull from the Power Cord.

5. Avoid contacting moving parts.

6. Do not operate any appliance with a damaged cord or plug, or after the

appliance malfunctions, or is dropped or damaged in any manner. Return

appliance to the nearest Authorised Service Facility for examination, repair, or

electrical or mechanical adjustment.

7. The use of attachments not recommended or sold by KitchenAid may cause

re, electric shock, or injury.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter.

10. Keep hands and utensils away from moving Blades or Discs while processing

food to reduce the risk of severe injury to persons or damage to the Food

Processor. A scraper may be used but must be used only when the Food

Processor is not running.

PRODUCT SAFETY

11. Blades are sharp. Care should be taken when handling the sharp cutting

blades, emptying the bowl and during cleaning.

12. If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualied persons in order to avoid hazard.

13. To reduce the risk of injury, never place cutting Blade or Discs on Base without

rst putting Bowl properly in place.

14. Be certain Cover is securely locked in place before operating appliance.

15. Never feed food by hand. Always use Food Pusher.

16. Do not attempt to defeat the Cover interlock mechanism.

17. Do not ll the Bowl above the marked maximum ll line (or rated capacity) to

avoid risk of injury due to damage to the Cover or Bowl.

18. Refer to the “Care and Cleaning” section for instructions on cleaning the

surfaces in contact with food.

19. Be careful if hot liquid is poured into the food processor as it can be ejected

out of the appliance due to sudden steaming.

20. This appliance is intended to be used in household and similar applications

such as:

- staff kitchen areas in shops, ofces and other working environments;

- farm houses;

- by clients in hotels, motels and other residential type environments;

- bed and breakfast type environments;

SAVE THESE INSTRUCTIONS

PRODUCT SAFETY

ELECTRICAL REQUIREMENTS

Voltage: 220-240 V

Frequency: 50-60 HZ

NOTE: If the plug does not fit in the

outlet, contact a qualified electrician.

Do not modify the plug in any way.

Instructions are also available online, visit our website at:

www.KitchenAid.com.au

ENGLISH

ACCESSORIES SELECTION GUIDE

Action Setting Food Accessory

Whisking/

Whipping 1 or 2 Cream, Eggs Whisk Accessory

Chop 1 or O/P

Cheese

Chocolate

Fruits

Fresh herbs

Nuts

Tofu

Vegetables Multi-Purpose Four Blade

Mince or Purée 2 or O/P

Mix 1

Pasta Sauce

Pesto

Salsa

Sauces

Batters

Slice

Fruit (soft)

Potatoes

Tomatoes

Vegetables (soft) Reversible Slicing/

Shredding Disc

(slicing side)

Cheese

Chocolate

Fruit (hard)

Vegetables (hard)

Shred

(Medium)

1Potatoes

Vegetables (soft)

Reversible Slicing/

Shredding Disc

(shredding side)

Cabbage

Cheese

Chocolate

Fruits (hard)

Vegetables (hard)

Knead O/P / 2 Yeast Dough Dough Blade

Before ﬁrst use

Before using your Food Processor for the first time, wash all parts and accessories either

by hand or in the dishwasher (see “Care and Cleaning” section).

NOTE: Your Food Processor is designed so that all accessories may be stored inside the

Work Bowl.

Lift up the Lid Latch to unlock the Cover.

Tilt the Work Bowl Cover back and lift it

straight up so that the Lid Hinge pulls out

of the Handle Hinge.

Remove all parts and accessories from

the Work Bowl, and lift the Food Pusher

out of the Feed Tube.

Place the Work Bowl on the Base, aligning

the Handle with the raised button on the

right side of the Base. The Bowl will click

into place and should be flush against the

Base when properly aligned.

Place the Drive Adapter in the Work

Bowl, lowering it onto the Drive Pin.

PRODUCT ASSEMBLY

IMPORTANT: Place the Food Processor on a dry, level countertop with the controls

facing forward. Do not plug in the Food Processor until it is completely assembled.

ENGLISH

PRODUCT ASSEMBLY

NOTE: For ease of assembly, install the desired Blade or Disc before attaching the Work

Bowl Cover.

NOTE: Your Food Processor will not operate unless the Work Bowl Cover is fully closed

and the Work Bowl is properly seated on the Base.

To attach the Work Bowl Cover, hook the

Lid Hinge into the Handle Hinge on the

Work Bowl and close the Cover.

Once the Work Bowl Cover is closed,

push the Lid Hinge down into the locked

position.

5 6

INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE

Place the Blade on the Drive Adapter.

Rotate the Blade so it falls down to the

base of the Adapter.

Install the Work Bowl Cover, and be sure

the Lid Latch is pushed down to the

locked position.

PRODUCT ASSEMBLY

INSTALLING THE REVERSIBLE SLICING/SHREDDING DISC

To slice: Turn the Disc so that the raised

Slicing Blade is facing up.

To shred: Turn the Disc so that the small,

raised Shredding Blades are facing up.

The Disc can be placed in two different

positions: level with the top of the Bowl

for processing, and lower, inside of the

Bowl for storage.

NOTE: Make sure the Disc is level

with the top of the Bowl for best

performance.

1Process

Storage

Hold the Disc by its centre hub and lower

it onto the Drive Adapter, aligning the

mark on the centre hub of the Disc to the

matching mark on the Adapter. When

properly placed, the Disc should be level

with the top of the Bowl. If the Disc falls

to the storage position, lift it out, turn it

90°, and lower it again.

Install the Work Bowl Cover, and be sure

the Lid Latch is pushed down to the

locked position.

2 3

Alignment

marks

ENGLISH

PRODUCT USAGE

Rotating Blade Hazard

Always use food pusher.

Keep ngers out of openings.

Keep away from children.

Failure to do so can result in

amputation or cuts.

Before operating the Food Processor, be

sure the Work Bowl, Blades/Disc, and Work

Bowl Cover are properly assembled on the

Base (see the “Product Assembly” section).

O/P

To turn on, press 1 or 2. The Food

Processor will run continuously and the

indicator light will glow.

To turn off, press 1 or 2 again, or press

O/P.

To use the Pulse function:

Press O/P for short bursts, or press and

hold for longer bursts. The Pulse function

runs at high speed only. The Food

Processor will turn off when the O/P

button is released.

1 2

OPERATING THE FOOD PROCESSOR

PRODUCT USAGE

USING THE 2-IN-1 FEED TUBE

The 2-in-1 feed tube features a 2-piece

Food Pusher. To slice or shred small items,

insert the 2-Piece Food Pusher into the

Feed Tube.

Use the small Feed Tube and pusher to

process small or slender items, like single

carrots or celery stalks.

To slowly drizzle oil into ingredients, just ﬁll

the small pusher with the desired amount

of oil. A small hole in the bottom of the

pusher will drizzle the oil at a constant rate.

REMOVING PROCESSED FOODS

O/P

Turn the Food Processor off: Press

the O/P button and unplug the Food

Processor before disassembling.

Lift the Lid Latch to unlock the Work

Bowl Cover, then lift the Cover to

remove.

1 2

2-Piece

Food

Pusher

O/P

When finished, press the O/P button. The

indicator light will go out

and the Blade or Disc will slow to a stop.

Wait until the Blade or Disc comes to a

complete stop before removing the Work

Bowl Cover. Be sure to turn off the Food

Processor before removing the Work

Bowl Cover, or before unplugging the

Food Processor.

3 4

Table of contents

Other KitchenAid Food Processor manuals

KitchenAid

KitchenAid KSM2FPA User manual

KitchenAid

KitchenAid KSM1FPA User manual

KitchenAid

KitchenAid 5KFC3516P User manual

KitchenAid

KitchenAid KFP0924 User manual

KitchenAid

KitchenAid 5KFP0925 User manual

KitchenAid

KitchenAid Cook Processor User manual

KitchenAid

KitchenAid 5KFP1319 Series User manual

KitchenAid

KitchenAid 4KFP720BU2 User manual

KitchenAid

KitchenAid KFP740 Quick guide

KitchenAid

KitchenAid 5KFC3516 User manual

KitchenAid

KitchenAid KFC0516 Manual

KitchenAid

KitchenAid 5KFP1335 User manual

KitchenAid

KitchenAid KFP750 Quick guide

KitchenAid

KitchenAid KSM60SP Series User manual

KitchenAid

KitchenAid KFC3516Q User manual

KitchenAid

KitchenAid 5KFP0919EOB User manual

KitchenAid

KitchenAid 5KFC0516 User manual

KitchenAid

KitchenAid 5KCF0104 User manual

KitchenAid

KitchenAid KFPW760QER0 Quick guide

KitchenAid

KitchenAid KFC3516PK0 User manual

KitchenAid

KitchenAid KFP0711OB User manual

KitchenAid

KitchenAid KFP1317 User manual

KitchenAid

KitchenAid KFP1133WH User manual

KitchenAid

KitchenAid KFP1333 User manual

Popular Food Processor manuals by other brands

INNOLIVING

INNOLIVING INN-727 user manual

Berkel

Berkel C32 Specifications

Beko

Beko CHP5554W user manual

QUIGG

QUIGG KM 2017Wi.20 Instructions for use

Lakeland

Lakeland PRESS AND CHOP 31557 Instruction booklet

Bosch

Bosch MMR08 GB Series instruction manual

HOFFEN

HOFFEN Chef Express T9532 instruction manual

Garland

Garland 852 ZG instruction manual

Robot Coupe

Robot Coupe CL50 Gourmet manual

SAPIRHOME

SAPIRHOME SP-1111-K instruction manual

Moulinex

Moulinex DJ3051 manual

Bosch

Bosch MUM5 instruction manual

cecotec

cecotec Mambo Touch instruction manual

Black & Decker

Black & Decker hc 300 Use and care

Gorenje

Gorenje SBR 1000 DV instruction manual

Arzum

Arzum AR 1128 manual

Saturn

Saturn ST-FP0069 instructions

Vitek

Vitek VT-1641 W Manual instruction