Kirisun PT6200 User manual

NSTRUCT

MANUA

ANDH

RANS

NOTE

NSTRUCT

MANUA

ANDH

RANS

are

very

grateful

for

your

purchasing

brand

transceivers

produced

Kirisun

Electronics

(Shenzhen) Co.,

Ltd.

believe

transceiver,

which

always

incor-porates

the

latest

technology,

can

bring

great

convenience to

your

life

and

work;

also

believe

that

the

quality

and function

transceiver

can

meet

your

demands

for reliable

communication.

NOTICE

THE

USER:

Government

laws

prohibit

radio

communication

without

permission

government

districts.

Illegal

operation

punishable

fine

and/or

imprison-

ment.

Refer

service

the

well-trained

professional

techni-cians

only.

Emergency

Alert

Auxiliary

Functions

7.1

Time

out

Timer

(

OT)

7.2 Battery Saving 17

7.3 Low Battery Warning 18

7.4 VoiceAnnunciation of Channel Number 18

7.5 Busy Channel Lockout (BCL) 18

7.6 Clear TailTone 19

7.7 Remote Kill 19

7.8 CTCSS/ DCS 19

7.9 DTMF 20

7.10 KDC 1200 21

7.11 2-Tone 21

7.12 5-Tone 22

7.13 Transmitting Beginning/ Ending Signaling 23

Troubleshooting 24

Technical

Specifications

Settings

(by

the

Dealer)

CONTENTS 6.7 Wireless Clone 15

Unpacking and Checking the Equipment

1.1 Supplied Accessories

Preparation 2

2.1 Battery Care Tips 2

2.2 Battery Recycling and Disposing 3

2.3 Charging the Battery 3

Accessories 5

3.1 Installing/ Removing the Battery Pack 5

3.2 Installing the Antenna 6

3.3 Installing the Belt Clip 6

3.4 Installing the DustCover over the Versatile Connector 6

3.5 Installing the Optional Speaker/ Microphone 7

Getting Acquainted 7

4.1 Transceiver Overview 7

4.2 Programmable Auxiliary Functions 9

Basic Operation 10

Advanced Operations 11

6.1 Key Lock(Backup)

6.2 Monitor/Squelch off 12

6.3 Scan 12

6.4 CALL 1/ CALL 2 14

6.5 Scrambler (Backup) 14

6.6 VOX 14

ITEM

QUANTITY

Antenna

Belt

clip

Dust

cover

Screw

Battery

Charger

Power

adapter

User's

manual

Hand

strap

1UNPACKING AND CHECKING THE EQUIPMENT

Unpack the transceiver carefully. We recommend

that you identify the items listed in the

following table before discarding the packing

material. If any items are missing or have been

damaged during shipment, please contact the dealer

immediately.

1.1 Supplied Accessories

2PREPARATION

2.1 Battery Care Tips

The

transceiver

equipped

with

KIRISUN

Li-

ion/Ni-MH Battery

Pack,

the

following

using

tips

which

can

help

you to

get

the

best

battery

performance

and

longest

battery

life.

Charge

the

new

battery

pack

continuously

for

4~7

hours before

its

initial

using,

which

ensures

the

maximum

battery capacity

and

best

performance

using.

Charging

the

battery

pack

non-KIRISUN

equipments

will

cause

battery

damage

and

the

battery

warranty

invalid.

The

battery

pack

can

charged

while

the

transceiver, and

ensure

fully

charged

it's

recommended

charge the

battery

pack

with

the

transceiver

turned

off.

The

ideal

temperature

store

the

battery

pack

(room

temperature).

Charging

the

battery

pack

low temperature

(below

)

will

cause

electrolyte

leakage

and damage

the

battery

pack.

Charging

the

battery

pack

high

temperature

(above

)

will

cause

decrease

battery

discharge

capacity

and

affect

the

transceiver

performance.

The

KIRISUN

rapid charger

has

temperature

sensor,

which

ensures

the battery

charged

within

the

temperature

range

mentioned

Antenna

Power

adapter

Belt

clip

Battery

above.

new

battery

shows

significant

life

shortening

even

after two-year

storage.

The

new

used

battery

should

stored in

cool

and

dry

place

Charger

Dust

cover

Screw

Hand

strap

recharge

the

battery

pack

after

long

storage,

you

should

charge

continuously

for

4~7

hours.8)

not

leave

the

Charger

Indicator

Status

Red

The

battery

the

state

charging.

Green

The

battery

full

charge

the

charger

not

connected

with

the

battery.

Flashing

red

Pre-charge

Yellow

The

battery

temperature

abnormal.

Dim

The

battery

damaged

and

unable

charged.

transceiver

and

battery

the

charger

when

not

charging. Overlong

charging

will

shorten

the

battery

life.

(Please

do not

use

the

charger

the

transceiver's

mounting

bracket.)

Please

use

KIRISUN

charger

ensure

battery

normal

work and

prolong

its

life.

The

battery

and

charger

are

designed under

integrated

concept

power

system.

2.2 Battery Recycling and Disposing

After

the

battery

life

expires,

the

Li-ion

battery

can

be recycled.

KIRISUN

goes

for

the

recycling

all

the

rechargeable batteries.

For

details

please

contact

your

local KIRISUN

dealer.

2.3 Charging the Battery

new

battery,

battery

the

power

which

appears

low

needs

charging

before

using.

Note:

The

battery

not

fully

charged

the

factory,

and

probably

the

new

battery

falsely

indicated

full

charge.

Before

the

initial

use,

please

charge

the

new

battery

continuously

for

4~7

hours.

)

Connect

the

power

adapter

with the

battery

charger.

Plug

the adapter

into

wall

outlet and

the

indicator

turns

green.

)

Place

the

battery

transceiver

into

the

charger

slot.

The indicator

turns

red

flashes, then

the

charger

gets

the state

charging

automatically.

Charging

time

depends

on battery

capacity.

When

battery is

fully

charged

the

indicator turns

green.

Notes:

The

battery

not

fully

charged

the

factory.

Before

the initial

use,

please

charge

the

new

battery

continuously

for

The

charger

will

stop

charging

and

the

indicator

turns

yellow

the

charger

detects

the

battery

damaged

the temperature

the

battery

too

high

(higher

than

for Ni-MH

battery

for

Li-ion

battery).

not

charge

the

battery

longer

than

the

specified

time.

And

not

charge

the

battery

again

charged

fully, otherwise,

its

life

will

shortened

will

be damaged.

3.2 Installing the Antenna

Screw the antenna into

the connector at the top

of the transceiver by

holding the bottom of

the antenna and turn it

clockwiseuntilsecure.

3Accessories

3.1 Installing/Removing the Battery Pack

install

the

battery

pack:

Match

the

bulges

the battery

pac k

with

the

corresponding

holes

the

rear bottom

the

transceiver;

Then

firmly

press

the

battery pack

downwards

lock

in place

until

click

heard.

To remove the battery pack:

1) Use your thumb to press the

belt clip, and one side of your

index finger to press the

release button;

2) And then pull the battery

away from the transceiver.

3.3 Installing the Belt Clip

Match the grooves of the

belt clip with those on the rear of

the battery. Then press the belt

clip downwards to lock it in place.

3.4 Installing the Dust Cover over

the Versatile Connector

When not using the

optional Speaker/Microphone,

install the dust cover over

the versatile connector with the

supplied screw.

Table of contents

Other Kirisun Transceiver manuals

Popular Transceiver manuals by other brands

Yaesu

Yaesu FT-7B manual

Kenwood

Kenwood ProTalk TK-3201 instruction manual

Texas Instruments

Texas Instruments TLK10232 user guide

Mizuho

Mizuho MX-2 Operating & assembly instruction

Kenwood

Kenwood TK-3180 Manuale di istruzioni

Blitz

Blitz MJ-398U instruction manual

Utilicom

Utilicom LongRanger 2050 Operator's manual

Standart

Standart HX290UKA Service manual

Altronix

Altronix Pace1PTM installation guide

ELECRAFT

ELECRAFT KX2 manual

Zodiac

Zodiac K3 user manual

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U manual

Kenwood

Kenwood TK-2217 Service manual

Siemens

Siemens PSO 4000 Quick reference guide

Kenwood

Kenwood TS-590SG instruction manual

Midland

Midland G8E-BT Instruction guide

ComNav

ComNav Mariner X2 installation manual

Uniden

Uniden UH820 Series owner's manual