Kilotech KPC 1500 SS User manual

KPC 1500 SS

851295

Service Manual

Contents subject to change without

notice

Last edited: August 25th, 2016

TABLE OF CONTENTS

TABLE OF CONTENTS .................................................................................................................. 2

Introduction .............................................................................................................................. 3

Calibration................................................................................................................................. 4

Set selectable units .................................................................................................................... 4

Introduction

Thank you for choosing a Kilotech Scale. We appreciate your business and hope that you will enjoy using your

scale. Should you require Technical Support, please contact your local dealer from whom you have purchased.

General Precautions

Avoid lengthy exposure to heat or cold

Allow the scale to acclimate to normal room temperature

before use

Allow sufficient warm up time

Turn the scale on and wait for a few minutes to allow the

internal components a chance to stabilize before weighing

Do not leave a load or weight on a scale for a prolonged

period of time.

Might damage load cell

Do not tamper with the scale yourself

This will void the warranty. Contact your local distributor or

Kilotech directly to properly repair your scale

Do not overload beyond the maximum weight limit

Do not pull the plug by its cord when unplugging

Do not use the scale near fire or corrosive gas

Unless the scale is waterproof do not spill water or immerse in

water

Avoid placing the scale near a heater

It could cause a fluctuation to the indicator reading

Always make sure to use a Kilotech approved adapter

Do not drop the scale or apply a sudden shock

Do not drag the scale

Avoid exposing to other electromagnetic devices

These devices emit RF and can cause unstable readings. If

your scale should perform poorly, try moving the scale to a

different room or location

Level the scale or make sure it is on an even surface

A scale used on an uneven surface may provide an unstable

reading

Scale should be used within stated temperature

& humidity limits

Calibration

How to calibrate your scale

Before entering calibration mode, press [ON/OFF] to power up the scale for 1 minute.

Enter calibration mode:

Press [ON/OFF] to turn the scale off.

Press both the [ZERO] key and the [ON/OFF] key simultaneously.

Once the display shows CAL, you can release both buttons.

The scale will now display the A/D value.

Zero point calibration:

Wait for the stable indicator to be displayed.

Press the [UNIT] key. The display will show a flashing calibration weight.

Place the calibration weight on the platform.

Once the scale is stable, press the [UNIT] key.

The display will show "-------” followed by the A/D value.

Remove the weight and reboot the scale.

Check for accuracy.

If the calibration is repeatedly incorrect:

1) Replace the batteries,

2) Try a more stable surface or a vibration and interference free location.

Set selectable units

1. Press and hold ZERO and PCS together and power up the scale.

2. Press UNITS to scroll and select the available units: kg, lb ...

3. Select the one you want by pressing ZERO

4. ON indicates the unit you chose.

Other Kilotech Scale manuals

Kilotech

Kilotech KPC 2000 User manual

Kilotech

Kilotech KLE 200 User manual

Kilotech

Kilotech KPOS 1530 User manual

Kilotech

Kilotech KWS-SW series User manual

Kilotech

Kilotech MS-4202L Adult User manual

Kilotech

Kilotech KHS 200-30 User manual

Kilotech

Kilotech Integrator C30 User manual

Kilotech

Kilotech KRS 3000 User manual

Kilotech

Kilotech KWD 750SS User manual

Kilotech

Kilotech KPS 60 User manual

Kilotech

Kilotech KWS 301 User manual

Kilotech

Kilotech KPS 60 SS Use and care manual

Kilotech

Kilotech KPS MS User manual

Kilotech

Kilotech KPC 1000SS User manual

Kilotech

Kilotech KSB series User manual

Kilotech

Kilotech KWD 500 Use and care manual

Kilotech

Kilotech KWS 301 User manual

Kilotech

Kilotech Integrator LE.3k User manual

Kilotech

Kilotech 851340 Installation manual

Kilotech

Kilotech KPC 160 User manual

Kilotech

Kilotech CTR Series User manual

Kilotech

Kilotech KWS 2200 User manual

Kilotech

Kilotech KBS Series User manual

Kilotech

Kilotech S-2000 User manual

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual