Request to Users
This products must be used only by qualified personnel who understand the contents of this
operation manual. If it is handled by disqualified personnels, electrical hazards may result. Be
sure to handle it under supervision of qualified personnel (those who have electrical
knowledge).
If any abnormality or failure was detected in the products, stop using it immediately and
contact your Kikusui distributor or agent.
Installation
• Be sure the environmental condition where the products to be installed meets all
requirements listed in the operation manual.
• To prevent electric shock, connect the ground terminal to electrical ground (safety ground).
• Connect the product to the specified AC power source with the AC power cable provided.
• For output wiring or load cables, use connection cables with larger current capacity.
Maintenance and inspection
• To prevent electric shock, be absolutely sure to unplug or stop applying power before
performing maintenance or inspection.
• Make sure the AC input voltage setting and the fuse ratings are satisfied and that there is no
abnormality in the AC power cable.
• Do not remove the cover when performing maintenance or inspection. There are parts
inside the product which may cause physical hazards. Consult your Kikusui distributor or
agent before uncover the products in case if it is so necessary.
• To maintain performance and safe operation of the product, it is recommend to conduct a
periodic maintenance, inspection, cleaning, and calibration.
Relocation
• Disconnect all cables when relocate the product.
• Use two or more persons when relocate the product which weights more than 20 kg. The
weight of the products can be found in this operation manual.
• Be careful of harming protruded parts of the products such as output terminals, terminal
boards or heatsinks when moving.
• Use extra precautions such as using more people when relocating into or out of present
locations including inclines or steps. Also handle carefully when relocating tall products as
they can fall over easily.
• Be sure the operation manual are included whenever the product is moved, relocated or
possession is passed to another party.
