Jya Fjord Pro User manual
Jya Fjord Pro Air Purifier User Manual
Instrucciones del Purificador de Aire de Jya Fiordo Pro
1-12
14-26
01
WARNING
READ AND SAVE THESE INSTRUCTIONS
When the power cord is damaged, it must be replaced with a
genuine power cord purchased from the manufacturer or after-
sales service department.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
Make sure the purifier is turned o and unplugged before
performing the maintenance.
This appliance has a polarized plug (one blade is wider than the
other).
To reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
To reduce the risk of fire or electric shock, do not use this
appliance with any solid-state speed control device.
02
Precautions
Turn o and unplug the purifier before moving it.
The purifier cannot turn on when the fan grille and the filter compartment cover are not installed properly.
Maintain a distance of at least 20 cm between the air inlets and walls or other objects.
The purifier must be placed on firm and flat floor.
Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
Frequently remove dust, hair, and other particles from the outer mesh screen of the filter, so as to reduce the
chance of bacteria growth.
Remove dust, hair, and particles from the purifier's air inlets to prevent a reduction of air intake.
Cover the air outlet to prevent dust, hair, and other particles from falling in when the purifier is left unused for a
long time.
To avoid fire, electric shocks, or other damage, use the power cord and electrical outlet as instructed below:
Do not excessively pull, twist or bend the power cord, as this may expose or break the cord's core.
The power cord must be plugged into a suitable electrical outlet.
Use the power cord that is provided with the purifier, do not use any third party power cords.
Always unplug the purifier before carrying out maintenance to or moving the air purifier.
Immediately stop using the purifier when it makes unusual sounds, gives o bad odors, overheats, or its fan rotates
irregularly.
Do not stick your fingers or foreign objects into the protective parts, movable parts, air inlets, or air outlets.
Keep objects such as hairs or fabrics away from the purifier to avoid blocking the air inlets or air outlets.
Do not sit on, lean on or tilt the purifier.
When using in conjunction with gas-fueled appliances (such as gas stoves, gas heaters), please ventilate
suciently to avoid carbon monoxide poisoning.
Do not pour liquids, nor throw powders or other small substances into the purifier's air outlet.
Do not use the purifier in the following circumstances, as they may result in electric shocks, fire, or other damage:
Near open flames, such as candles, incense burners, stoves, fireplaces, cigarettes, firecrackers, lighters,
multipurpose torches, candle lighters, or fire pans.
Near appliances that generate high temperatures, such as electric heaters, fan heaters, electric foot warmers,
electric stoves, electric irons.
Make sure no inflammable objects get into the purifier.
In unstable locations where the purifier can easily fall over.
In environments that are extremely hot, humid, or damp, such as bathrooms.
03
Fan Grille
Air Inlets
Air Quality Indicator
Filter
Compartment
Cover
Release Button
Laser Particle Sensor
Gas Sensor
Power Switch Power Port
Touch Display
Screen
Note: Illustrations of product, accessories, and
user interface in the user manual are for reference
purposes only. Actual product and functions may
vary due to product enhancements.
Front View Rear View
Product Overview
Air Quality Indicator
The indicator will display green, yellow, orange or red
according the worst value of PM2.5、TVOC、PM10.
Read this manual carefully before use, and retain it for future reference.
Green
Yellow
Orange
Red
Excellent
Good
Moderate
Unhealthy
04
For optimal performance, make sure the distances
between purifier's air inlets and other objects such
as walls meet the requirements as suggested below.
Connect the power cord to the power
port at the bottom of the purifier and
then plug it into an electrical outlet.
Note: For optimal air purification, keep doors and windows
closed during use.
Placing
the purifier
Connecting
to an
electrical
outlet.
Installation
>20cm
>20cm
Remove the filter packaging
before turning on the purifier.
05
After connecting the power
cord, turn on the power switch
on the back of the device.
After the power switch is turned on, the starting
screen will be displayed and the main unit will enter
standby mode. Touch the icon to turn on the device.
How to Use
Note: After the main unit has been in standby mode for 1 minute,
the temperature and humidity will be shown on the display. You
can touch the display to return to the starting screen.
Power On/o
Power On/o Interface Temperature &
Humidity Interface
73.4
06
Automatic: Automatically switch modes according to
the indoor air quality.
Sleep: Ultra-low noise for a comfortable sleeping
environment.
Favorite: Set and save the coverage area and the
purifying efficiency in the app.
PM10 Interface PM2.5 Interface
PM2.5 Value
Operation
Modes
Wi-Fi Indicator
POLLEN and
TVOC indicator
Tip: The main screen interface can be switched by swipe left and right
Note: PM10 refers to coarse particles have an aerodynamic diameter ranging from 2.5 to 10μm (PM10–PM2.5).
Examples of coarse particles include dust, pollen, spores, and fly ash.
How to Use
Excellent 1-20 μg/m3
Good 21-35 μg/m3
Moderate 35-55 μg/m3
Unhealthy ＞55 μg/m3
Green
Yellow
Orange
Red
Excellent
Good
Moderate
Unhealthy
07
Press on main screen
Tap the mode icon to cycle through 3
operation modes: Automatic、Sleep、
Favorite.
Swipe down to enter the Power
On/O interface
Tip: After the screen is o, click to wake up the screen.
Swipe left
and right
Operation Modes Interface
Settings Interface
1
3
2
4
Touch it to switch
between the three
dierent air outlet angles
Click to adjust 4 levels of
screen brightness.
Displaying filter
remaining life
Air outlet angle
1
Resetting Wi-Fi
Perform Wi-Fi resetting、
disable and enable.
3
Screen brightness
adjustment
2
Filter lifespan
4
Swipe left and right to switch each setting interface,
click on the corresponding interface to set.
How to Use
08
Filter instructions
Filter installation notification
The purifier does not detect the filter or the
filter installed is not genuine one.
Filter status notification
Filter replacement notification
When the filter life is less than 10%, the
screen will prompt to replace the filter after
power-on, and after 5 seconds, it will jump
to the interface of filter replacement.
Note: The filter may produce odors when it absorbs excessive
harmful gases. It is recommended to store the filter in a place
with good lighting and ventilation to improve the activity
of the activated carbon and restore its particle adsorption
capacity. Please replace the filter when its recommended
service life is due.
Filter and Filter Replcement Instructions
How to buy a new filter
Scan the QR code or visit smartmi official store
https://www.smartmiglobal.com/filters/jya-fjord-
filter-pro for more information.
Filter
It is recommended
to replace the filter
every 6–12 months.
Resetting Wi-Fi
Resetting Wi-Fi
When unable to connect the purifier to the app, swipe right
on the main screen to enter the Wi-Fi setting interface,
click "Reset" to confirm. When the Wi-Fi icon on the
screen flashes, the reset is successful.
Enabling/Disabling Wi-Fi
Swipe right on the main screen to enter the Wi-Fi
setting interface, click "Disable" / "Enable", and then
click "Confirm" to disable or enable Wi-Fi function.
How to Use
09
Warning: Make sure to turn o the air purifier and disconnect power before replacing the filter.
Opening the filter compartment
Press and hold the release
buttons to open the filter
compartment cover.
Notes:
Replace the filter in time according to the filter life notification.
Please purchase genuine and compatible filters from ocial channels
01 Removing the old filter
Pull the strap and remove the filter.
02 Installing the new filter
Remove the packaging bag.
Place the new filter, and close
the filter compartment cover.
03
Filter replacement
Other manuals for Fjord Pro
1
This manual suits for next models
1
Table of contents
Languages:
Other Jya Air Cleaner manuals
