JVC KD-DB711 User manual
ENGLISH
FRANÇAIS
NEDERLANDS
CD RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-DB711
For installation and connections, refer to the separate manual.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende
handleiding.
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
LVT1309-003A
[EX]
For canceling the display demonstration, see page 7.
Pour annuler la démonstration des affichages, référez-vous à la page 7.
Zie bladzijde 7 voor het annuleren van de displaydemonstratie.
Cover_KD-DB711[EX]f.indd 2Cover_KD-DB711[EX]f.indd 2 1/12/05 4:11:53 PM1/12/05 4:11:53 PM
2
ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Warning:
If you need to operate the receiver while
driving, be sure to look ahead carefully or
you may be involved in a traffic accident.
How to reset your unit
This will reset the microcomputer. Your
preset adjustments will also be erased.
How to forcibly eject a disc
If a disc cannot be recognized by the
receiver or cannot be ejected, ejects the disc
as follows.
• If this does not work, try to reset your
receiver.
• Be careful not to drop the disc when it
ejects.
For security reasons, a numbered ID card is provided with this receiver, and the same ID number is
imprinted on the receiver’s chassis. Keep the card in a safe place, as it will help the authorities to
identify your receiver if stolen.
EN02-05_KD-DB711[EX]f.indd 2EN02-05_KD-DB711[EX]f.indd 2 1/12/05 4:12:15 PM1/12/05 4:12:15 PM
3
ENGLISH
How to reset your unit ........................... 2
How to forcibly eject a disc................... 2
How to read this manual........................ 4
How to use the MODE button ............... 4
Control panel — KD-DB711 ....... 5
Parts identification................................. 5
Getting started....................... 6
Basic operations.................................. 6
Canceling the display demonstration..... 7
Setting the clock .................................... 7
Radio operations ................... 8
Listening to the radio........................... 8
Storing stations in memory.................... 9
Listening to a preset station ................... 10
FM RDS operations................. 11
Searching for your favorite FM RDS
programme
....................................... 11
Storing your favorite programmes......... 12
Using the standby receptions................. 12
Tracking the same programme
—Network-Tracking Reception ........ 13
DAB tuner operations
................ 14
Listening to the DAB tuner ................... 14
Storing DAB services in memory.......... 15
Tuning in to a preset DAB service ........ 15
Tracing the same programme
—Alternative Frequency Reception
... 15
Other Main DAB Features..................... 15
Disc operations ...................... 16
Playing a disc ..................................... 16
Changing the display information ......... 18
Selecting the playback modes................ 19
Sound adjustments ................ 20
Selecting preset sound modes
(C-EQ: custom equalizer) .................. 20
Adjusting the sound ............................... 21
General settings — PSM .........22
Basic procedure ..................................... 22
Detaching the control
panel .................................. 25
Using the remote controller
— RM-RK60............................ 26
Main elements and features ................... 26
Maintenance .......................... 27
More about this receiver ........ 28
Troubleshooting ..................... 31
Specifications ......................... 33
*For safety....
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
Contents
*Temperature inside the car....
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating the
unit.
EN02-05_KD-DB711[EX]f.indd 3EN02-05_KD-DB711[EX]f.indd 3 1/12/05 4:12:16 PM1/12/05 4:12:16 PM
4
ENGLISH
How to use the MODE button
If you press MODE, the receiver goes into
functions mode, then the number buttons and
¢/4buttons work as different
function buttons.
Ex.: When number button 2 works as
MO (monaural) button.
Time countdown indicator
To use these buttons for original functions
again after pressing MODE, wait for
5 seconds without pressing any of these buttons
until the functions mode is cleared.
• Pressing MODE again also clears the
functions mode.
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.
How to read this manual
The following methods are used to made the
explanations simple and easy-to-understand:
• Some related tips and notes are explained in
“More about this receiver” (see pages 28−30).
• Button operations are mainly explained with
the illustrations as follows:
Press briefly.
Press repeatedly.
Press either one.
Press and hold until
your desired response
begins.
Press and hold both
buttons at the same
time.
EN02-05_KD-DB711[EX]f.indd 4EN02-05_KD-DB711[EX]f.indd 4 1/12/05 4:12:16 PM1/12/05 4:12:16 PM
5
ENGLISH
Control panel — KD-DB711
Parts identification
1+/– buttons
2DISP (display) button
3Loading slot
4Display window
5MODE button
60(eject) button
7¢/4buttons
8(standby/on/attenuator) button
9SEL (select) button
pRemote sensor
• See page 26.
qEQ (equalizer) button
wMO (monaural) button
eSSM (Strong-station Sequential Memory)
button
rSOURCE button
tBAND button
yRPT (repeat) button
uRND (random) button
iT/P (traffic programme/programme type)
button
o(control panel release) button
;Number buttons
Display window
aTuner reception indicators—MO (monaural),
ST (stereo)
sWMA indicator
dRDS indicators—TP, PTY, AF, REG
fMP3 indicator
gCD indicator
hPlayback mode / item indicators—
RND (random), (disc), (folder),
RPT (repeat)
jLOUD (loudness) indicator
kEQ (equalizer) indicator
lSound mode (C-EQ: custom equalizer)
indicators—ROCK, CLASSIC, POPS,
HIP HOP, JAZZ, USER
• also works as the time countdown
indicator.
/Disc information indicators—TAG (ID3
Tag), (folder), (track/file)
• also lights up when DLS is shown for a
DAB service.
zMain display
xSource display / Volume level indicator
cTr (track) indicator
Display window
EN02-05_KD-DB711[EX]f.indd 5EN02-05_KD-DB711[EX]f.indd 5 1/12/05 4:12:16 PM1/12/05 4:12:16 PM
6
ENGLISH
⁄Adjust the volume level.
Volume level appears.
Volume level indicator
@Adjust the sound as you want.
(See pages 20 and 21.)
To drop the volume in a moment (ATT)
To restore the sound, press it
again.
To turn off the power
Getting started
Basic operations
~Turn on the power.
ŸSelect a source.
You cannot select some sources if they
are not ready.
!• For FM/AM tuner:
• For DAB tuner:
EN06-11_KD-DB711[EX]f.indd 6EN06-11_KD-DB711[EX]f.indd 6 1/12/05 4:12:34 PM1/12/05 4:12:34 PM
7
ENGLISH
Canceling the display
demonstration
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: DEMO ON]—see page 23.
1
2
3
4Finish the procedure.
To activate the display demonstration
In step 3above...
Setting the clock
1
2Set the hour, minute, and clock
system.
1Select “CLOCK H” (hour), then
adjust the hour.
2Select “CLOCK M” (minute),
then adjust the minute.
3Select “24H/12H,” then select
“24H” (hour) or “12H” (hour).
3Finish the procedure.
To check the current clock time when the
power is turned off
EN06-11_KD-DB711[EX]f.indd 7EN06-11_KD-DB711[EX]f.indd 7 1/12/05 4:12:35 PM1/12/05 4:12:35 PM
8
ENGLISH
~
Ÿ
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Selected band appears.
!Start searching for a station.
When a station is received, searching
stops.
To stop searching, press the same
button again.
Radio operations
Listening to the radio
To tune in to a station manually
In step !on the left...
1
2Select the desired station frequencies.
EN06-11_KD-DB711[EX]f.indd 8EN06-11_KD-DB711[EX]f.indd 8 1/12/05 4:12:35 PM1/12/05 4:12:35 PM
9
ENGLISH
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting—
SSM (Strong-station Sequential
Memory)
1
2Select the FM band (FM1 – FM3)
you want to store into.
3
4
“SSM” flashes, then disappears when
automatic presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
When an FM stereo broadcast is hard to
receive
1
2
Lights up when monaural mode is activated.
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, repeat the same
procedure so that “MONO OFF” appears.
• The MO indicator also goes off.
EN06-11_KD-DB711[EX]f.indd 9EN06-11_KD-DB711[EX]f.indd 9 1/12/05 4:12:36 PM1/12/05 4:12:36 PM
10
ENGLISH
Manual presetting
Ex.: Storing FM station of 92.5 MHz into the
preset number 4 of the FM1 band.
1
2
3
4
Preset number flashes for a while.
Listening to a preset station
1
2
3Select the preset station (1 – 6) you
want.
• If the preset station is an FM RDS station,
you can use Programme Search (see page 23).
To check the current clock time while
listening to an FM (non-RDS) or AM station
• For FM RDS stations, see pages 11 − 13.
EN06-11_KD-DB711[EX]f.indd 10EN06-11_KD-DB711[EX]f.indd 10 1/12/05 4:12:36 PM1/12/05 4:12:36 PM
Other manuals for KD-DB711
3
This manual suits for next models
3
Table of contents
Other JVC Car Receiver manuals
