JVC HZ-CA13U User manual

HZ-CA13U Cine Lens Adapter

INSTRUCTIONS

Thank you for purchasing the HZ-CA13U Cine lens adapter.

HZ-CA13U is an adapter for mounting 16mm cine lens to JVC ProHD Camcorder.

Compatible camcorder : HZ-CA13U can be used on Camcorder which lens mounting method is 1/3-inch Bayonet type.

GY-HD100U/E, GY-HD101E, GY-HD110U/E, GY-HD111E, GY-HD200U/E, GY-HD201E

GY-HD250U/E, GY-HD251E

Attaching the Cine Lens Adapter to the Camcorder

1.Loosen the mount ring of the camcorder.

2.Attach the cine lens adapter with its pin aligned with the

hole in the mount.

3.Tighten the mount ring of the camcorder.

4.In the case of fixed-focus lens, adjust the lens focus to t ∞,

take picture of object (30m far away or above) and then

adjust using Back focus adjust ring such that the back focus

is adjusted properly.

CAUTION

• Be sure to tighten the mount ring completely. Incomplete

tightening may result in the lens dropping off or disturbed

back focus.

• Set the Camcorder’s power switch to “OFF” before the zoom

lens is attached or detached.

• This adapter is exclusively for 16mm Cine lens.

• 1/4-inch UNC screw holes for lens support are provided on

this adapter. Attach the lens support always when using the

cine lens.

• When taking picture using this adapter, the image will be

displayed upside-down on the monitor. A menu to restore

the upside-down image is available on GY-HD200/201/250/

251.

Specifications

Conversion Ratio : x 0.47

Aperture : f / 1.4

Size length : 138.2 mm (Mount to Mount)

Diameter : φ78 mm

Weight : 860 g

Mount for lens side : PL Mount

Mount for Camera side : 1/3-inch Bayonet Mount

 Dimensions (unit: mm)

© 2007 Victor Company of Japan, Limited LST0570-001A

5.When zoom lens is mounted, use Back focus adjust ring to

adjust if the back focus is out of adjustment. Firstly, set to

Telephoto position and adjust the lens focus, then set to

Wide-angle position and adjust using Back focus adjust ring

such that the focus is adjusted properly.

Pin

Back focus adjust rin

g

H

o

l

e

Back Focus Adjust Ring

1/3-inch Bayonet Mount

(For Camcorder)

Mounting Cine lens

(PL Mount)

1/4-inch UNC20 Screw hole

Pin

1/3-inch Bayonet

Mount

F.B 31in air

F.B 52in air

138.2 (Mount to Mount)

PL Mount

78.5

1/4-inch UNC20

φ78

Table of contents

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions