Jung Home User manual
Table of Contents
1 Safety instructions.............................................................................................................3
2 Device components...........................................................................................................3
3 Intended use .....................................................................................................................4
4 Product characteristics......................................................................................................4
5 Operation ..........................................................................................................................7
5.1 Operation via extensions ....................................................................................... 8
6 Mounting and electrical connection...................................................................................9
7 Commissioning via app ...................................................................................................10
8 Resetting the device to the factory setting ......................................................................11
9 Technical data.................................................................................................................12
10 List of functions and parameters .....................................................................................14
11 Conformity.......................................................................................................................26
12 Warranty..........................................................................................................................26
2 / 26
32405203 24.02.2023
J0082405203
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
1 Safety instructions
To avoid possible damage, read and follow the following instructions:
Installation only by persons with appropriate knowledge and experience in the
following areas:
– 5 safety regulations and standards for the installation of electrical systems
– Selection of suitable tools, measuring devices, installation materials and, if ne-
cessary, personal protective equipment
– Installation of the installation material
– Connection of devices to the building installation under consideration of local
connection conditions
Improper installation endangers your own life and the lives of users of the electrical
system and there is a risk of serious damage to property, e.g. through fire. You are at
risk of personal liability for personal injury and damage to property.
Contact an electrical fitter!
Danger of electric shock. If the device exhibits any visible damage, it must not be
used any longer. Immediately disconnect device from mains by switching off all asso-
ciated circuit breakers.
Danger of electric shock. Device is not suitable for disconnection from supply voltage
because – depending on the insert used – mains potential even is applied on the load
when the device is switched off. Always disconnect before carrying out work on the
device or load. To do so, switch off all associated circuit breakers.
The device must not be used for applications from the area of safety engineering,
such as emergency stop, emergency call, smoke extraction.
Read the instructions in full, observe them and keep them for future reference.
You can find more information on JUNG HOME at www.jung.de/JUNGHOME
2 Device components
Image1: JUNG HOME push-button 1-gang
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
3 / 26
32405203 24.02.2023
J0082405203
Image2: JUNG HOME push-button 2-gang
(1) System insert
(2) Design frame
(3) Operating cover
(4) Status LED
LED indication during operation
Green* Output is switched on
Venetian blind, shutter, awning moving
Orange* Output is switched off (rocker operating concept)
Venetian blind, shutter, awning stationary
Orientation LED (button operating concept)
Red Disabling function active, e.g. continuously on/off
Blue, triple flashing Time has not been set, e.g. due to extended power failure
Flashing green/red Device update is being performed
Red, triple flashing Error message (cover was previously connected to another
system insert)
* Colour adjustable
3 Intended use
– Manual and automatic operation of e.g. venetian blinds, shutters, awnings
lighting or fans
– Wireless connection to devices from the JUNG HOME system
– Operation with system insert for dimming, switching, Venetian blind or 3-wire
extension
4 Product characteristics
– Commissioning and operation using JUNG HOME app on mobile end device
(smartphone or tablet) via Bluetooth
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
4 / 26
32405203 24.02.2023
J0082405203
– Operation of top, bottom and full surface with up to two linked functions per
rocker
– Using buttons to control areas (groups) or call up scenes
– Using buttons to operate wirelessly linked JUNG HOME devices
– Multi-colour status indication with optional night mode
– Feedback of load status by status LED
– Disabling local operation
– Integration of the load into areas (groups), main functions and scenes
– Up to 16 time programs control the functions of the respective system insert
(switch on, switch off, dimming, move Venetian blind, adjust temperature)
– Staircase lighting function (automatic switch-off) with switch-off warning
– Run-on time, switch-on delay, switch-off delay
– Activating/deactivating automatic functions with the JUNG HOME app
– Automatic date and time update when connecting with smartphone
– Maximum brightness and minimum brightness adjustable, with dimming insert
– Switching on with last brightness or fixed switch-on brightness, with dimming
inserts
– Ventilation position, running time, slat change-over time, change-over time for
change in direction and inverse operation adjustable, with Venetian blind insert
– Evaluation of the extension inputs (if present) to control the system insert
– Bluetooth SIG Mesh for fully encrypted wireless communication and repeater
function
– Updating via JUNG HOME App
Available by update in the future:
– Using buttons to trigger disabling function and restraint
– Time programs with sunrise and sunset (astro timer)
– Time programs with random time
– Disabling function and restraint: lock-out protection, continuously ON/OFF or
ON/OFF for fixed time
– Night light function with period for brightness reduction, with dimming insert
– Hotel function (orientation light instead of OFF), with dimming insert
– Warm dimming (changing the colour temperature with simultaneous bright-
ness increase), with DALI insert
– Wind alarm by connecting conventional weather sensors to extension input
with Venetian blind insert
You can find information on updates and dates at www.jung.de/JUNGHOME
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
5 / 26
32405203 24.02.2023
J0082405203
Behaviour after a mains voltage failure
All settings and time programs are retained. Any missed switching times are not ap-
plied later. The load output or the system insert outputs are switched off, provided the
parameter "Switching status after mains voltage returns" is set to its default setting.
If the device was not previously added to a Bluetooth Mesh network (project) by
means of the JUNG HOME app, it will switch to pairing mode for two minutes after
the mains voltage returns and the status LED will flash slowly at a regular interval in
blue.
Power failure shorter than power reserve (min. 4 hours)
– Time and date are up to date
– The following time programs are performed normally again
Power failure longer than power reserve (min. 4 hours)
– The LEDs flash in blue three times repeatedly until the time is automatically
updated when connecting with the app
– The time programs are not executed as long as the time is not up to date
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
6 / 26
32405203 24.02.2023
J0082405203
5 Operation
All settings and operations of the cover can be configured individually using the
JUNG HOME app.
Configuration in the JUNG HOME app: The default setting with the "rocker" operating
concept is described in the table.
Type of operation Brief press Long press
Switching1Switch on alternately at top,
bottom or with full surface
Switch on at top, bottom of
with full surface alternately
Dimming1Switch on at top, bottom of
with full surface to switch-
on brightness / switch off
alternately
Top: dim brighter / bottom:
dim darker
Moving Venetian blind /
shutter / awning2Stop or adjust the slats Top: move up / bottom:
move down
Heating1Increase the target temper-
ature at the top by 0.5 °C /
Decrease the target tem-
perature at the top by 0.5
°C
–
Operating scenes1Call up scene at top or bot-
tom
Call up scene at top or bot-
tom
Operating an area
(group)1/2 Depending on the unit, as
described for switching,
dimming, Venetian blinds
and heating
Depending on the unit, as
described for switching,
dimming, Venetian blinds
and heating
Disabling function (lock-out
protection, restraint)1– Top: activate / bottom: de-
activate
Changing the colour tem-
perature (with DALI insert)
– Top: increase colour tem-
perature / bottom: decrease
colour temperature
1 Brief push-button action < 0.4 s < long push-button action
2 Brief push-button action < 1 s < long push-button action
Wireless operation
Wireless operation is done with linked JUNG HOME devices or via the JUNG HOME
App, which is also used to link the JUNG HOME devices (see 'Commissioning via
App').
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
7 / 26
32405203 24.02.2023
J0082405203
5.1 Operation via extensions
Precondition:
A push-button, an Satellite insert 2-wire with an LB Management push-button 1-gang
or an Satellite insert 3-wire, power supply with an LB Management push-button 1-
gang or LB management motion detector is connected. Multiple extensions can be
combined with each other. Operation with the Rotary satellite insert 3-wire is de-
scribed in the rotary extension instructions.
If no run-on time (load) is set, the load either switches alternately ON/OFF or specific-
ally ON at the top and OFF at the bottom, depending on the extension used.
Switching on a load for the duration of the run-on time
￭ Press the operating cover at the top or the push-button briefly or LB manage-
ment motion detector detects a movement.
The run-on time is restarted by pressing again or detecting the movement again.
If the load is supposed to be able to be switched off manually, the parameter "Manual
switch-off of run-on time" must be activated.
Setting the brightness, only in combination with dimming insert
￭ Press and hold the operating cover at the top or bottom or the push-button. In
the case of a push-button, the dimming direction is changed with each new
long actuation.
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
8 / 26
32405203 24.02.2023
J0082405203
6 Mounting and electrical connection
Communication between the JUNG HOME devices and linked mobile end devices is
performed wirelessly within the range of the Bluetooth Mesh network.
The range of wireless signals can be affected by:
– Number, thickness, position of ceilings, walls and other objects
– Material type of these objects
– High-frequency interfering signals
Observe the following fitting instructions to maximise the range:
– Plan the number of JUNG HOME devices and their positions to keep the num-
ber of ceilings and walls between two devices as low as possible
– If JUNG HOME devices are installed on both sides of a solid wall, they should
be positioned as close as possible to each other on the opposite sides of the
wall. This keeps the attenuation of the wireless signal through the wall as low
as possible.
– When planning, make sure that there are as few building materials and objects
as possible that strongly attenuate the wireless signal (e.g. concrete, glass,
metal, insulated walls, water tanks, pipes, mirrors, book cabinets, storage
rooms and refrigerators) on the connection line between JUNG HOME devices
– Keep a distance of at least 1 m from devices that emit high-frequency signals
(e.g. microwave, motors) or use wireless signals at 2.4 GHz (e.g. WLAN
router, baby monitor, IP cameras, wireless loudspeakers etc.)
DANGER!
Electric shock when live parts are touched.
Electric shocks can be fatal.
Always disconnect before carrying out work on the device or load. For this, switch off
all corresponding circuit breakers, secure against being switched on again and check
that there is no voltage. Cover up adjacent live parts.
Prerequisite: The system insert (1) is mounted and connected properly (see instruc-
tions for the relevant system insert).
￭ Fit the operating cover (3) with frame on the system insert (1).
￭ Switch on mains voltage.
An system insert-cover alignment is executed.
If the status LED (4) flashes red three times at repeated intervals, the cover was pre-
viously connected to another system insert. To enable operation again, perform one
of the following steps:
￭ Fit the cover on the original system insert.
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
9 / 26
32405203 24.02.2023
J0082405203
￭ With a system insert of the same type: full-surface operation of the left button
for more than 4 seconds. The parameter settings and app and network con-
nection are retained.
￭ With a system insert of a different type: reset the cover to the default setting.
The parameter settings and app and network connections are retained.
7 Commissioning via app
Prerequisite: The JUNG HOME device does not yet belong to a Bluetooth Mesh net-
work. Otherwise reset the device to the default setting.
If a Bluetooth Mesh network (project) does not yet exist, a new project must first be
created for the first JUNG HOME device in the JUNG HOME app.
If a Bluetooth Mesh network already exists, the project file for this network must be
opened in order to pair the new device.
After switching on the mains voltage, the device is automatically in pairing
mode for two minutes.
Image3: Commissioning
￭ Activate pairing mode manually:
Press the left button over entire surface for longer than 4 seconds.
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
10 / 26
32405203 24.02.2023
J0082405203
Other manuals for Home
1
Table of contents
Other Jung Switch manuals
Jung
Jung 1202 URE User manual
Jung
Jung 567 S Series User manual
Jung
Jung 10911ST Series User manual
Jung
Jung 1180 Series User manual
Jung
Jung 1701SE User manual
Jung
Jung 3281-1 Series User manual
Jung
Jung 3181-1 Series User manual
Jung
Jung 1704ESE User manual
Jung
Jung 10911STRF Series User manual
Jung
Jung KNX 3281-1 Series User manual
Jung
Jung FMAS10ZS User manual
Jung
Jung KNX 4071.0 LED Series Operator's manual
Jung
Jung 52921 ST User manual
Jung
Jung 1701 SE User manual
Jung
Jung FAS180 Series User manual
Jung
Jung FMAS816REG User manual
Jung
Jung 1254 TSE User manual
Jung
Jung FA10EB User manual
Jung
Jung AS 1280-1 Series User manual
Jung
Jung LB management User manual
