Johnson 40-6515 User manual
©2010 Johnson Level & Tool - Rev. 1 1
Self-Leveling Rotary Laser Level
Model Nos. 40-6515, 40-6516 and 40-6517
Instruction Manual
Congratulations on your choice of this Self-Leveling Rotary Laser
Level. We suggest you read this instruction manual thoroughly before
using the instrument. Save this instruction manual for future use.
This is a Class a laser tool and is manufactured to comply
with CFR 21, parts 1040.10 and 1040.11 as well as international
safety rule EC 285.
3515H_Manuals 6/2/10 9:00 AM Page 1
2©2010 Johnson Level & Tool - Rev. 1
Table of Contents
1. Kit Contents
2. Features and Functions
3. Safety nstructions
4. Location/Content
of Warning Labels
5. Location of Parts/Components
6. Operating nstructions
7. Using the Product
8. Self-Check & Fine Calibration
9. Technical Specifications
10. Application Demonstrations
11. Care and Handling
12. Product Warranty
13. Warranty Registration
14. Accessories
1. Kit Contents
For Model No. 40-6515
Description Qty.
Self- Leveling Rotary Laser Level 1
“AA” Alkaline Batteries 4
Tinted Glasses 1
nstruction Manual with Warranty Card 1
Soft Sided Carrying Case 1
For Model No. 40-6516
Description Qty.
Self- Leveling Rotary Laser Level 1
“AA” Alkaline Batteries 4
Tinted Glasses 1
Detector with 9V Battery and Clamp 1
nstruction Manual with Warranty Card 1
Hard Shell Carrying Case 1
For Model No. 40-6517
Description Qty.
Self- Leveling Rotary Laser Level 1
“AA” Alkaline Batteries 4
Tinted Glasses 1
Detector with “AAA” Batteries and Clamp 1
Magnetic Target 1
Elevating Tripod 1
Wall/Ceiling Mount 1
8’ Grade Rod 1
nstruction Manual with Warranty Card 1
Hard Shell Carrying Case 1
3515H_Manuals 6/2/10 9:00 AM Page 2
©2010 Johnson Level & Tool - Rev. 1 3
2. Features and Functions
• Self-leveling with magnetically dampened compensation system.
• f laser is out of its self-leveling range, rotation stops and alarm
sounds.
• Projects a horizontal laser plane.
• Projects a vertical laser plane with a simultaneous 90° split
beam.
• Laser rotation speed is 200 (L), 400 (M), 600 (H) RPM.
• lluminated vertical vial.
• Water and dust resistant.
3. Safety Instructions
Please read and understand all of the following instructions, prior
to using this tool.
DANGER!
Class a Laser Product
Max. Power Output: ≤5mW
Wavelength: 625-645nm
THIS T L EMITS LASER RADIATI N.
D N T STARE INT BEAM.
AV ID DIRECT EYE EXP SURE.
3515H_Manuals 6/2/10 9:00 AM Page 3
4©2010 Johnson Level & Tool - Rev. 1
ATTENTION IMPORTANT
• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.
• Do not stare directly at the laser beam.
• Do not project the laser beam directly into the eyes of others.
• Do not set up laser tool at eye level or operate the tool near a reflective surface as
the laser beam could be projected into your eyes or into the eyes of others.
• Do not place the laser tool in a manner that may cause someone to unintentionally
look into the laser beam. Serious eye injury may result.
• Do not operate the tool in explosive environments, i.e. in the presence of gases or
flammable liquids.
• Keep the laser tool out of the reach of children and other untrained persons.
• Do not attempt to view the laser beam through optical tools such as telescopes as
serious eye injury may result.
• Always turn the laser tool off when not in use or left unattended for a period of time.
• Remove the batteries when storing the tool for an extended time (more than 3 months)
to avoid damage to the tool should the batteries deteriorate.
• Do not attempt to repair or disassemble the laser tool. f unqualified persons attempt
to repair this tool, warranty will be void.
• Use only original Johnson®parts and accessories purchased from your Johnson®
authorized dealer. Use of non-Johnson®parts and accessories will void warranty.
3515H_Manuals 6/2/10 9:00 AM Page 4
©2010 Johnson Level & Tool - Rev. 1 5
4. Location/Content of Warning Labels
3515H_Manuals 6/2/10 9:00 AM Page 5
6©2010 Johnson Level & Tool - Rev. 1
5. Location of Part/Components
Rotating Laser
Output Widow
Keypad
Lock Knob –
Compensator/
Transportation
Battery Door
DC 6V Outlet
(6V Adapter not
included)
5/8” – 11 Screw
Thread
90° Split Beam Laser
Output Window
Vertical Vial
Charging LED
Vertical Vial Adjustment
Knob
3515H_Manuals 6/2/10 9:00 AM Page 6
©2010 Johnson Level & Tool - Rev. 1 7
6. perating Instructions
IMP RTANT: t is the responsibility of the user to verify the
calibration of the laser before each use.
Alkaline Battery Installation
Note: Always check to be sure that the on/off switch is in the off
position before removing and replacing batteries.
1. nstall alkaline batteries into the battery case according to the
polarity illustrated in the battery compartment.
2. Place the battery door back and tighten the screw.
Bubble Adjustment While in Use Vertically
1. Turn the lock knob counter-clockwise to off position to “LOCK” the
compensator. The laser is now operating in a “manual mode”
and is not self-leveling.
3515H_Manuals 6/2/10 9:00 AM Page 7
8©2010 Johnson Level & Tool - Rev. 1
2. Turn the vertical adjustment knob to center the bubble in the
vertical vial.
7. Using the Product
Keypad
When the laser is in the horizontal position, the laser will not
power on until the compensator/transportation lock knob is
turned to the “ n” position.
Power Key: Press this key to power on/off the laser.
Power LED: Lighted LED mean power-on
Extinguished LED means power-off
Flashing LED means weak battery voltage
Rotating speed
switch key Power Key
Low speed LED
Middle speed LED
High speed LED
Power LED
3515H_Manuals 6/2/10 9:00 AM Page 8
©2010 Johnson Level & Tool - Rev. 1 9
Rotating speed switch key
Note: When starting the unit, the laser will be in the high-speed rotating status.
When switching the rotating speed, the corresponding LED will light up.
ut of Level
Set the lock knob to the on position. Power on. During the process of
self-leveling, if the laser is tilted to exceed its self-leveling range, it
will stop rotating and will give a sound alarm.
600 (H)
High speed
400 (M)
Middle speed
200 (L)
Low speed
3515H_Manuals 6/2/10 9:00 AM Page 9
10 ©2010 Johnson Level & Tool - Rev. 1
Application Methods
nstall the alkaline batteries into the instrument. Put the laser on a
platform or connect the laser to a tripod using the 5/8” - 11 screw
thread.
Note:
1. To use the laser in the self-leveling status, please set the lock knob
to the on position.
2. While the laser is in the vertical status (manual mode), please set
the lock knob to off position.
3. Power on the laser and select your desired speed by pressing the
keys on the keypad.
4. After operations or before moving the unit, please power off and
lock the laser first.
Use on a platform
Connect the laser with the tripod using the 5/8” - 11 screw thread
3515H_Manuals 6/2/10 9:00 AM Page 10
Other manuals for 40-6515
1
This manual suits for next models
2
Table of contents
Other Johnson Laser Level manuals
Johnson
Johnson 40-0918 User manual
Johnson
Johnson 40-6065 User manual
Johnson
Johnson 1876-2400 User manual
Johnson
Johnson Hot Shot 40-0917 User instructions
Johnson
Johnson 40-6164 User manual
Johnson
Johnson 40-6670 User manual
Johnson
Johnson 40-6685 User manual
Johnson
Johnson 9100 User manual
Johnson
Johnson 40-6250 User manual
Johnson
Johnson JLX LEVEL UP 40-6681 User manual
Johnson
Johnson 40-6602 User manual
Johnson
Johnson 40-6936 User manual
Johnson
Johnson 40-6535 User manual
Johnson
Johnson 40-6250 Operating and maintenance instructions
Johnson
Johnson 40-6551 User manual
Johnson
Johnson 40-6502 User manual
Johnson
Johnson 40-6647 User manual
Johnson
Johnson 40-6065 User manual
Johnson
Johnson 40-6028 User manual
Johnson
Johnson 40-6692 User manual
