Jetson Quest User manual
QUEST
ELECTRIC FOLDING SCOOTER
TABLE OF CONTENTS
What’s in the Box 1
Features & Specs 2
Assembling the Handlebar 3
Assembling the Handles 4
Charging the Battery 5
Unfolding the Quest 6
Operating the Quest 7
Battery Indicator 8
Speed Settings 9
Riding the Quest 10
Using the Thumb Throttle 11
Using the Handbrake 12
Adjusting the Handbrake 13
Using the Kickstand 14
Folding the Quest 15
Connecting to Bluetooth® 16
Care and Maintenance 17
Safety Warnings 18
1. WHAT’S IN THE BOX
1
3
5
7
8
10 11
1. FRONT TIRE
2. HANDBRAKE
3. HANDLEBAR
4. RELEASE LEVER
5. DECK
6. REAR FENDER
7. REAR TIRE
8. KICKSTAND
9. SMALL SCREW (X4)
10. CHARGER
11. CHARGING CABLE
4
2
6
Please Note: Illustrations may not reflect exact appearance of actual product.
9
2. FEATURES & SPECS
• Product Dimensions: 47.24” (L) x 21.65” (W) x 46.45” (H)
• Weight Limit: 220 lbs.
• Product Weight: 28.4 lbs.
• Recommended Age: +13
• Tire Size: 8.5”
• Max Speed: Up To 15 mph
• Max Range: Up To 18 Miles
• Battery: 36V, 7.5Ah Lithium-Ion
• Motor: 500W Hub Motor
• Charger: 100-240V
• Charge Time: Up To 6 Hours
• Climbing Angle: Up To 15°
• Frame Material: Aluminum Alloy
QUEST
3. ASSEMBLING THE HANDLEBAR
Slide Handlebar
into Stem Tube
Tighten using
the 4 small
screws
Make sure the screws are tight and the Handlebar is secure.
4. ASSEMBLING THE HANDLES
Connecting the Handles:
• Starting on the rider left side, take one handle and twist it
towards the rider 3-4 times until it catches. If it does not catch,
try the other handle on the same side. Tighten until the handle
no longer turns.
• Repeat on the rider right side by twisting the handle towards
the rider until it no longer turns.
5. CHARGING THE BATTERY
A few must-do’s:
• Only use the included charger
• Plug the charger into the wall before the Charging Port
• Don’t turn on the Quest while it’s charging (it needs its rest)
• Charge the battery until it is fully charged - up to 6 hours
• Replace the cover over the Charging Port when done
• Remember to have fun!
CHARGING INDICATOR ON THE CHARGER:
Red Light: Battery is charging
Green Light: Charging is complete
Charging Port
6. UNFOLDING THE QUEST
6.1
6.2 6.3
Unclip
Unclip the Handlebar from
the Rear Fender
Lift Handlebars away from Deck Close the Release Lever by lifting it
up until it clicks
Release
Lever
6.4 6.5
Make sure the Release Lever and
Handlebars are secure.
6.6
Lock the Release Lever
Turn to
lock
7. OPERATING THE QUEST
LED Display
• Powering On/Off - Hold the Power Button for 3 seconds to turn the Quest
on or off.
• LED Display - Shows current speed, speed mode, and battery life
remaining.
• Light Function - Once the Quest is on, press the Power Button twice to
turn on the headlight and taillight. The light symbol will show on the LED
Display.
• Odometer - Press the Power Button 3 times to show the Odometer. Press
it another 3 times to return to the Speedometer.
Power
Button
Other manuals for Quest
1
Table of contents
Other Jetson Scooter manuals
Jetson
Jetson JTWIN-GRN User manual
Jetson
Jetson Gleam User manual
Jetson
Jetson ARROW User manual
Jetson
Jetson Journey 3.0 User manual
Jetson
Jetson Mars User manual
Jetson
Jetson Corona Ryder User manual
Jetson
Jetson Orbit User manual
Jetson
Jetson Triton User manual
Jetson
Jetson BOLT User manual
Jetson
Jetson ESBT-V5 User manual
Jetson
Jetson J8 User manual
Jetson
Jetson Copperhead JCOPHD-BLK User manual
Jetson
Jetson TWIN User manual
Jetson
Jetson JSOLO User manual
Jetson
Jetson Hex User manual
Jetson
Jetson PROTON User manual
Jetson
Jetson JIMPULSE-WHT User manual
Jetson
Jetson Warren User manual
Jetson
Jetson Bolt Pro User manual
Jetson
Jetson E-POCKET User manual
