Jensen JHD922BT User manual
JHD922BT
AM/FM/WX/BT/USB Heavy Duty Radio
Installation and Operation Manual
1 2 3 4 5 6
CONTENTS
Introduction .........................................................................................................................................................3
Safety Information .............................................................................................................................................4
Installation ............................................................................................................................................................5
Wiring .....................................................................................................................................................................6
Basic Operation...................................................................................................................................................7
Tuner Operation............................................................................................................................................... 10
Bluetooth Operation...................................................................................................................................... 12
Care and Maintenance .................................................................................................................................. 14
Troubleshooting .............................................................................................................................................. 15
Specications.................................................................................................................................................... 16
FCC Notes........................................................................................................................................................... 17
3
INTRODUCTION
System Features
Features of Jensen JHD922BT mobile audio system include:
• 14 Characters Alpha-Numeric Segmented LCD
• AM/FM (US/Europe /Japan/Russia) Tuner with 30 Presets
(12AM, 18FM)
• Weatherband Tune
• Mute
• Bluetooth Streaming Audio (Supports A2DP and AVRCP)
• Loudness
• Electronic Bass, Treble, Balance, Fader Controls
• Maximum Output Power RMS 40W x 4
• Clock 12/24 Hour Selectable
• Work Clock Timer
• Low Battery Voltage Alert
• Illumination Dimming
• USB Charging
• 2-Channel Pre-amp Line Level Outputs
• 2- Wire Power with Non-Volatile Memory and Clock/Time
support
Content List
• Jensen Heavy Duty Radio
• Hardware Kit
• Mounting Bracket
• Quick Reference Guide
HARDWARE KIT CONTENTS
Commander
Radio
Mounting Bracket
Self-Tapping
Screws (4)
M4 Machine
Screws (4) Washers (4)
Hex Nuts (4)
Machine Screws
With Nuts (4)
Wiring Harness
1 2 3 4 5 6
4
SAFETY INFORMATION
When Driving
Keep the volume level low enough to be aware of the road and trac conditions.
When Washing Your Vehicle
Do not expose the product to water of excessive moisture. Moisture can cause electrical shorts, re or other damage.
When Parked
Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down
before starting playback.
Use the Proper Power Supply
This product is designed to operate with a 12 volt DC negative ground battery system.
WARNING:
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED
ACCESSORIES.
5
INSTALLATION
Mounting the Bracket
Two options are provided for mounting the bracket (self-
tapping screws or machine screws with nuts) to ensure a
mounting option ideal for your mounting location. Avoid
obstructing airow to the rear cooling ns on the radio.
Notes: Mounting holes should be drilled to 7/32”. Before
drilling the mounting holes, make sure the area behind the
panel where the holes are desired is clear of wires and fuels,
vacuum and or brake lines.
Self-Tapping
Screws
(Hole size 7/32”)
Regular Mounting Overhead Mounting
Machine Screws
with Nuts
(Hole size 7/32”)
Attaching the Radio
Once the bracket is securely mounted, use the four included
M4 machine screws to fasten the bracket to the back of the
radio. Alternatively, the radio can be mounted directly to the
instrument panel if access to the rear of the instrument panel.
CAUTION! Do not over tighten the 4 mounting screws. Hand
tighten only.
6
WIRING
No. Color Description
1
2
3
4
5
6
7
8
9
10
11
12
50 ohm Cable
Dark Blue
Black
Red
Gray
Gray/Black
White
White/Black
Black
Black
Gray
Gray
BT Antenna
AMP Remote(+12VDC 500MA)
Ground
+12V DC Switched
Right Speaker (+)
Right Speaker (-)
Left Speaker (+)
Left Speaker (-)
USB Pigtail
External Antenna
Line Out (R)
Line Out (L)
WARNING!
Do not connect the +12VDC ACC switched wire to the battery.
This wire MUST be connected to the Accessory/Ignition wire
or a +12 volts switched power source.
7
BASIC OPERATION
Power On/O
Press the POWER button (1) to turn the unit on. The unit will
resume at the last mode (Tuner, BT, etc.) after turn on. Press
and hold the POWER button (1) to enter standby mode.
Volume Control
To increase the volume, press the button (20). To decrease
the volume, press the button(19).
Play/Pause/Mute
Press the button (18) on the control panel to pause or
mute the audio output. Press button again to unmute or
restore the audio output to the previous level.
Mode
Press the MODE button (2) to select a dierent mode of
operation, as indicated on the display panel. Available modes
include the following: FM > AM > Weather Band > BT Audio.
FM is the default source mode on initial power up.
NOTE: DAB+ Digital Radio mode will be skipped when the
Region menu option is set to “USA/ Russia / Japan”.
NOTE: Weatherband mode will be skipped when the Region
menu option is set to “Europe/ Russia / Japan”.
Reset
The RESET button (10) should be activated for the following
reasons:
• Initial installation of the unit when all wiring is completed.
• Function buttons do not operate.
• Error symbol on the display.
Use a ball point pen or thin metal object to press the reset
button. This may be necessary should the unit display an error
code.
Audio Menu
Press the SETUP button (11) to access the audio menu. You
can navigate through the audio menu items by pressing the
SETUP button repeatedly or or buttons (9, 8). Once the
desired menu item appears on the display, adjust that option
by pressing the or buttons (20, 19) within 5 seconds. The
unit will automatically exit the audio menu after ve seconds
1
2
17 16 15 14 13 12
3 4 5 6
7
8
9
10
11
20
19
18
1 2 3 4 5 6
8
of inactivity. The following menu items can be adjusted.
Loudness:
Press the or buttons (20, 19) to toggle the loudness on/o.
When listening to music at low volumes, this feature will boost
the bass/treble range to compensate for the characteristics of
human hearing.
Bass Level
Press the or buttons to adjust the Bass level range from“-7”
to “+7”.
Treble Level
Press the or buttons to adjust the Treble level range from
“-7” to “+7”.
Balance
Press the or buttons to adjust the Balance between the
left and right speakers from “Left 7” to “Right 7”.
System Menu
1. Press and hold the SETUP button (11) for more than 2
seconds to enter the system menu.
2. Press the SETUP button (11) repeatedly or or buttons
(9, 8) to navigate the system menu.
3. Press the or buttons (20, 19) to adjust the selected
menu item. Press the ENTER/TIMER button (6) to select
the desired item.
The unit will automatically exit the system menu after 5
seconds of inactivity.
The following items can be adjusted:
• LCD Dimmer (1-10): Adjust LCD backlight
• Bluetooth Devices: Press to ENTER/TIMER button (6) to
enter sub-menu. Press or buttons (9, 8) to navigate
list. List loops. Press ENTER/TIMER button to select
device. Press or to navigate selected device’s menu
of available options (Lock/Unlock > Connect/ Disconnect
> Delete and List loops). Press ENTER/TIMER button to
select options.
• Lock/Unlock: Press ENTER/TIMER button to lock
or unlock device. Lock icon displays next to device
name in menu when device is locked.
• Connect/Disconnect: Press ENTER/TIMER button to
connect or disconnect previous paried device.
• Delete: Option only available if selected device is
unlocked. Press ENTER/TIMER button to delete.
• Clock Set: Setting the clock (HH:MM) and hour format.
• Low Voltage Alarm (On/O): Monitor voltage on ACC line
and send alert when voltage is low.
• Low Voltage Auto O (On/O ): Automatically turn o
power to radio when battery voltage is low.
• Preset-Only Tuning (On/O): If ‘Preset-Only Tune’ is set to
‘On’ in System Settings, only presets from all bands are
recalled in sequence.
• Tuning Region (USA/EURO/RUSSIA/JAPAN): Set frequency
spacing for various regions.
9
• USA Tuning Region (AM > FM > WX > Bluetooth).
• Europe, Japan & Russia Tuning Region (AM > FM >
Bluetooth).
• Key Beep (On/O): Turn the audible beep On/O (heard
when functions/ buttons are selected). Beep tone o will
not aect Battery Alarm audible tone.
• Reset System Defaults: Press the ENTER/TIMER button and
Press or buttons to select Conrm. Press the ENTER/
TIMER to return the unit to factory default set up values.
• System Info: Display rmware version.
NOTE: Bluetooth Device menu options are only available
while the Bluetooth feature is ON and the radio is in Bluetooth
Audio mode.
NOTE: A locked Bluetooth device will not be overwritten from
the list.
Low Voltage Alarm Operation
If Low Voltage Alarm is set to “On”, an alarm will sound (8
beeps every 30 sec) when the voltage drops to 10.5V (+/-
0.3V). A visual warning (LOW VOLTAGE) will appear, Press any
button to dismiss visual warning, (reappear every 10-minutes)
in the LCD display.
NOTE: “Off” is the default setting for Low Voltage Alarm. If the
audio is muted or the volume is set to 0, the audible beep will
not be heard.
Liquid Crystal Display (LCD)
The liquid crystal display (LCD) panel (4) displays the frequency,
time and activated functions.
Press the POWER button (1) to turn the dimmer On (selected
brightness level) and press again to turn dimmer O (maximum
brightness level).
NOTE: LCD panels may take longer to respond when subjected
to cold temperatures for an extended period of time. In
addition, the visibility of the characters on the LCD may
decrease slightly. The LCD display will return to normal when
the temperature increases to a normal range.
Setting the Clock
To set the clock to display the current time, turn the vehicle
ignition on and turn the radio on. Enter the system menu and
adjust the clock by selecting the “Set Clock” menu item.
• Press ENTER/TIMER button (6) to enter clock setting menu.
• Press or to select hours, minutes, or 12/24 hour format.
• Press or to adjust the setting eld.
When no adjustment is made, the time will become set and
normal operation will resume.
Setting Work Timer
To activate the work timer clock and running in the
background,
• Press ENTER/TIMER button (6) to display work timer.
• Press ENTER/TIMER button again to start/stop work timer.
10
• Press & hold ENTER/TIMER button to reset work timer.
• Press RETURN button (7) to exit work timer display.
If timer is exited while running,“TIMER”ashed every 10
seconds for 2 seconds in place of clock in footer right on the
display.
TUNER OPERATION
Select a Band
Press the BAND/SCROLL button (3) to change between FM1,
FM2, FM3, AM1 and AM2.
Manual Tuning
Press & hold the or buttons (9, 8) to seek stations up/
down step by step.
1
2
17 16 15 14 13 12
3 4 5 6
7
8
9
10
11
20
19
18
1 2 3 4 5 6
Auto Seek Tuning
Press the or buttons (9, 8) to automatically seek the next
or previous strong station.
NOTE: Seek tuning is not available for weather band channels.
Use the up or down tuning buttons to manually select any of
the seven available weather band channels.
Preset Stations
Six numbered preset buttons store and recall stations.
Store a Station
Select a station, then press and hold a preset button from 1 –
6on the number buttons (12-17) for two seconds. The preset
number will appear on the LCD.
Recall a Station
Press a preset button from 1 – 6 on the number buttons to
select the corresponding stored station.
NOTE: Preset buttons are pre-assigned frequencies in weather
band mode.
Automatically Store / Preset Scan (AS/PS)
Automatically Store
Select an AM or FM band. Press and hold the AS•PS button (5)
for 2 seconds to automatically select 6 strong stations.“Storing
Presets”appears on the screen and the new stations replace
any stations already stored.
Other manuals for JHD922BT
1
Table of contents
Other Jensen Radio manuals
Jensen
Jensen buddy dab User manual
Jensen
Jensen JCR-229 User manual
Jensen
Jensen JEP-100 User manual
Jensen
Jensen SAB-55 User manual
Jensen
Jensen JHD62 User manual
Jensen
Jensen FOX 1000I User manual
Jensen
Jensen JHD1130WP User manual
Jensen
Jensen FOX1000i User manual
Jensen
Jensen JMS4 User manual
Jensen
Jensen JHD22 User manual
Jensen
Jensen MCR-60 User manual
Jensen
Jensen JEP-250 User manual
Jensen
Jensen JCR-310 User manual
Jensen
Jensen Heavy Duty User manual
Jensen
Jensen DL500 User manual
Jensen
Jensen JHD1635BT User manual
Jensen
Jensen JWM-120 User manual
Jensen
Jensen JHD1130 User manual
Jensen
Jensen JiSS-85 User manual
Jensen
Jensen JHD1510 - Heavy Duty AM/FM/Weather Band... User manual
