Jecod AK-70 User manual
LED Aquarium Lights
Model：AK-70
User's Manual
Introduction
AK-70 Aquarium Light can imitate the natural light under the
sea. It can create a natural and comfortable living environment for
your marine creatures such as fish and corals etc. AK-70 consists
of six groups of LEDs including White, Blue 1, Blue 2, Violet,
Green and Red. Users can adjust the brightness of each group of
LEDs to reach a different light effects, which also brings you
satisfied visual enjoyment.
Specification
Lamp Body
Dimension
Lamp body
Height
Adaptor
Extendable Holder
Range
10.6cm 8.0cm DC15V/6A 0~30cm
LED
Watts
White Blue
1
Blue
2
Violet Green Red Total
W 17 17 17 18 9 9 65
Remark: The above-mentioned power is the sum of the fan, Wi-Fi
and all LED.
Lamp layout
white
blue1
blue2
voilet
green
red
LED Spectrogram
Installation Diagram
Installation Steps
1. Connect the Curve Rod and Holder. Tighten by
revolve clockwise the screw thread at both ends.
2. Screw Join 2 to the nut on the lamp body.
Join Lever
Fix Screw
Holder
Curve Rod
Lamp body
Nut
Lower
Join
Upper Join
3. Insert the Screw to the nut.
4. Place Join 1 to the end of Curve Rod. Screw the nut
to the Curve Rod to secure Join 1.
5. Connect the Join1 and Join 2 with Join Lever.
You could bend the Curve Rod to your desired angle.
AK-70 Structure Drawing
APP User Guide
1. Scan the below barcode to install the application to your
phone or tablet. Alternately, IOS user can search “Jebao” in
App Store, and Android user can use the link below to
download the application.
http://iot.ekewe.net/tools/jebao-lamp.apk
2. Open the APP, click “Regedit” to crew a new account. Or sign
in by input your account ID and password (skip Step○
3).
3. Fill in the information and click "Register complete”
4. Add Device: two methods available
Note ：Android user can use both methods. (Method Ⅰ is
recommended). IOS user can use Method Ⅰ only.
Method Ⅰ: Return to your phone’s home page and click on WLAN
(Android) or Wi-Fi (IOS) under “Setting”. Find the AK-70 Wi-Fi,
which starts with JEBAOLL in the network lists, and click it to
connect. Making sure Wi-Fi is successfully connected, return to the
APP. Click on “+” (android) or “ ” (IOS).
WLAN network list
Android
AK-70 WI-FI starts
with JEBAO
IOS
Note: When connecting with the Method 1, AK-70 shall be
subjected to Wi-Fi resetting.
Method Ⅱ: click "+" in the interface that pops up. (Only for
Android)
5. Click refresh button in the interface ( skip to Step 6 if the
device has been already shown on the page)
6. Click on the lamp
7. Input your Wi-Fi name and password correctly on the pop up
interface and click OK. (This step is not required for Method
Ⅱ).
8. The configuration starts automatically.
9. The name of the lamp shall occur in the "Devices" when the
Android system is configured; Click < in the IOS system to
return "Devices" to see the lamp name.
Click on the device name to operate the corresponding lamp while
Table of contents
Other Jecod Aquarium manuals
Popular Aquarium manuals by other brands
Royal Exclusiv
Royal Exclusiv Bubble King DeLuxe 300 datasheet
Sera
Sera Marin Precision Biotop LED Cube 130 Instructions for installation and use
Commodity Axis
Commodity Axis ViaAqua Titanium Heater manual
Sander
Sander Ozonizer P 2000 Instructions for use
Hagen
Hagen HALF MOON instructions
CPR
CPR CS150 manual