Clock Setting:
①Press “ ”, and then press “ ”, to enter the time
setting interface.
②Press “ ” to set hours and “ ” to set minutes;
③After setting, press “ ” to save and exit to the main
interface.
④Press " " once in normal mode to check the set time.
2. Feeding Time Setting
Timing icon
Feed icon Portion size
icon
Switch Button Set Button Manual/Save Button
Program
Button
Battery icon
The number of days
between feedings
byte1 byte2 byte3 byte4
Feeding time diagram
Press “ ” to view the feeding times
Steps:
①Press “ ” to enter the feeding time setting interface;
②Press “ ” to set the feeding time for the first meal,
four digits flash (“- -” indicates no feeding).
③Press “ ”to set hour, then press “ ” to set the
next meal.
④After setting, press “ ” to save.
Notice:
①
Feeding time is on the hour.
②
Up to 6 times can be set.
③
Please set feeding time clockwise.
3. Feeding Portion Setting
Timing icon
Feed icon Portion size
icon
Switch Button Set Button Manual/Save Button
Portion
Button
Battery icon The number of days
between feedings
byte1 byte2 byte3 byte4
Feeding portion diagram
Press “ ” to check feeding portions
Portion Setting Per Meal：
①Press “ ” to check the servings per meal, when four digits
flash. Then press “ ” to reset if necessary.
②Press “ ” to adjust feeding quantity, maximum 9 portions
and then press “ ”to the next meal.
③After setting, press “Manual/Save” to save and exit.
Explain: Each feeding portion is 2 seconds.
4. Manual Feeding
Press “ ” to manual feeding in standby mode, 2 seconds
running time.
For only one meal each day, the interface displays "-- --" and
lasts for one hour after feeding, to indicate that feeding is done
today.
5. Feeding Interval Setting
Press " " for 3 seconds, “the number of days between feeding”
flashes. Press " " each time, it increases 1 unit. The default is
"0", and the interval is "7" days at most.
VIII. Maintenance
1. This product is suitable for indoor use. Do not soak in water.
2. Please clean up the canister before changing feed, to avoid
food sticking to the bolt due to moisture.
3. Clean the canister and bolt regularly, and keep them dry to
prevent the feed from agglomerating at least once a month.
4. Do not flush the canister with water.
5. Do not touch buttons with wet hands.
Steps To Dismantle The Bolt:
No display on
control panel
Loosen internal
connecting cable
Open the battery
compartment to
reattach
The impeller
rotates but no feed
DISPOSAL:
Do not dispose this product as unsorted
municipal waste. Collection of such waste
separately for special treatment is necessary. This product
must not be disposed together with the domestic waste. This
product has to be disposed at an authorized place for recycling
of electrical and electronic appliances. By collecting and
recycling waste, you help save natural resources, and make
sure the product is disposed in an environmentally friendly and
healthy way.
Jebao Co., Ltd.
Add: Tongmao Industrial Park, Xiaolan, Zhongshan, Guangdong, China
Tel: +86-760-28136708, 28136720
①Remove the front cover
②Remove two screws
③Remove the canister
④Take out the bolt
