fold
63
This product is for use on a 120VAC 60Hz circuit and has a grounding plug. Grounding provides
a path of least resistance for electric current to reduce the risk of electric shock. This massager is
equipped with a cord having an equipment-grounding conductor and a grounding plug. Improper
connection of the equipment-grounding conductor can result in a risk of electric shock. Do not
modify the plug provided with the product. If it does not t the outlet, have a proper outlet installed.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance to all local codes and ordinances. No adapter should be used with this massager.
GROUNDING INSTRUCTIONS
Each massager has been individually and carefully inspected at the factory. Should your massager fail to start upon being turned
on for the rst time out of the box, contact Customer Service at Core Products at 800-365-3047 for a simple remedy to assist
proper massager operation.
OPERATING INSTRUCTIONS
1. Plug electric cord into outlet.
2. Turn massager on. For the Jeanie Rub® single speed model, ip the toggle switch.
For the Jeanie Rub® variable speed model, turn the dial to a medium operating range.
3. Place massager in contact with the body.
4. Stop the massager by ipping the toggle switch on the single speed model.
For the variable speed model, turn dial to the off position.
IF MASSAGER FAILS TO START
1. Use this massager only for its intended use as described in this manual.
2. Close supervision is necessary when the massager is used by, on or near children, disabled
persons or those who cannot tolerate vibration.
3. Never leave massager unattended while plugged into an electrical outlet.
4. Use only attachments or accessories recommended by the manufacturer.
5. Connect this massager to a properly grounded electrical outlet only.
SEE GROUNDING INSTRUCTIONS in this manual.
6. Do not operate if power supply cord has been damaged or the massager is not functioning
properly.
7. Do not use massager if it has fallen into water. Do not touch. Unplug immediately.
8. Do not drop or insert foreign objects into the massager.
9. Unplug massager when not in use or when taking massager accessories on or off.
10. Do not operate massager under a blanket or where air openings can become blocked.
11. Keep all air openings free of lint, hair and other debris.
12. Keep massager away from heated surfaces.
13. Do not operate massager where aerosol (spray) products are in-use or where oxygen is being
administered.
14. After massager has been turned off, allow adequate time for it to cool down before storing.
15. Do not use for more than 20 minutes at a time or with excessive pressure to avoid overheating.
16. Do not carry the applicance by supply cord or use cord by handle.
17. Do not use outdoors.
18. Do not use while bathing or in a shower.
SAVE THESE INSTRUCTIONS To reduce the risk of re, burns, electric shock or
injury, please read this manual and all instructions prior to using the massager.
WARNING: USE CAUTION WHEN WEARING LOOSE CLOTHING OR
JEWELRY WHILE OPERATING YOUR MASSAGER. LONG HAIR MUST NOT
COME IN CONTACT WITH THE MASSAGER WHILE OPERATING. LOOSE
CLOTHING, JEWELRY, AND HAIR CAN POTENTIALLY GET CAUGHT IN THE
MOVING PARTS OF YOUR MASSAGER.
IMPORTANT SAFETY INSTRUCTIONS
PRODUCT
INFORMATION
Using Oils, Lotions or Creams
When using oils, lotions or creams with the Jeanie Rub® massager, Core Products
recommends using a Sheepskin or Fleece Pad Cover to protect the vinyl massager pad.
Because oils, lotions or creams can prematurely crack and erode the vinyl, using a pad
cover will prolong the pad’s life.
Care of Pad
The pad on the Jeanie Rub Massager can be cleaned with a mild detergent. Use of too much alocohol on the
pad may cause it to crack.
Cooling the Massager after Use
Because the Jeanie Rub® massager is an electrical appliance, it can become warm to the touch while in use.
Each massager has a built-in fan to keep the motor from overheating. However, when the massager is turned
off, the fan no longer aids in keeping the motor cool and the massager may remain warm for a few
minutes after use. Core Products recommends allowing the massager to cool to the surrounding
air temperature or to the touch before storing the massager in its proper place.
Special Motor Information: Jeanie Rub® Variable Speed Models
The universal motor found in the Jeanie Rub® variable speed model incorporates carbon
brushes. When the massager is used extensively at very low rpm levels, carbon can build up
inside the motor housing, decreasing the massager’s effectiveness. Core Products recommends
that after each low rpm usage, the massager is run for a few minutes at a higher rpm level to
ensure the built-up carbon is cleaned from the motor housing. This will prolong the life of the
carbon brushes and optimize the massager’s use.
Certied by the Canadian Standards Association
All Jeanie Rub® massagers are built to ANSI Standards and certied by the Canadian Standards
Association. The CSA mark on your Jeanie Rub® massager ensures that it has been evaluated
to meet or exceed the ANSI/UL/CSA consumer safety standards for use in the United States
and Canada.
6
PRODUCT
INFORMATION
Certied by the Canadian Standards Association
All Jeanie Rub® massagers are built to ANSI Standards and certied by the Canadian Standards
Association. The CSA mark on your Jeanie Rub® massager ensures that it has been evaluated
to meet or exceed the ANSI/UL/CSA consumer safety standards for use in the United States
and Canada.
SAVE THESE INSTRUCTIONS
3
This product is for use on a 120VAC 60Hz circuit and has a grounding plug. Grounding provides
a path of least resistance for electric current to reduce the risk of electric shock. This massager is
equipped with a cord having an equipment-grounding conductor and a grounding plug. Improper
connection of the equipment-grounding conductor can result in a risk of electric shock. Do not
modify the plug provided with the product. If it does not t the outlet, have a proper outlet installed.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance to all local codes and ordinances. No adapter should be used with this massager.
GROUNDING INSTRUCTIONS
Each massager has been individually and carefully inspected at the factory. Should your massager fail to start upon being turned
on for the rst time out of the box, contact Customer Service at Core Products at 800-365-3047 for a simple remedy to assist
proper massager operation.
OPERATING INSTRUCTIONS
1. Plug electric cord into outlet.
2. Turn massager on. For the Jeanie Rub® single speed model, ip the toggle switch.
For the Jeanie Rub® variable speed model, turn the dial to a medium operating range.
3. Place massager in contact with the body.
4. Stop the massager by ipping the toggle switch on the single speed model.
For the variable speed model, turn dial to the off position.
IF MASSAGER FAILS TO START
1. Use this massager only for its intended use as described in this manual.
2. Close supervision is necessary when the massager is used by, on or near children, disabled
persons or those who cannot tolerate vibration.
3. Never leave massager unattended while plugged into an electrical outlet.
4. Use only attachments or accessories recommended by the manufacturer.
5. Connect this massager to a properly grounded electrical outlet only.
SEE GROUNDING INSTRUCTIONS in this manual.
6. Do not operate if power supply cord has been damaged or the massager is not functioning
properly.
7. Do not use massager if it has fallen into water. Do not touch. Unplug immediately.
8. Do not drop or insert foreign objects into the massager.
9. Unplug massager when not in use or when taking massager accessories on or off.
10. Do not operate massager under a blanket or where air openings can become blocked.
11. Keep all air openings free of lint, hair and other debris.
12. Keep massager away from heated surfaces.
13. Do not operate massager where aerosol (spray) products are in-use or where oxygen is being
administered.
14. After massager has been turned off, allow adequate time for it to cool down before storing.
15. Do not use for more than 20 minutes at a time or with excessive pressure to avoid overheating.
16. Do not carry the applicance by supply cord or use cord by handle.
17. Do not use outdoors.
18. Do not use while bathing or in a shower.
SAVE THESE INSTRUCTIONS To reduce the risk of re, burns, electric shock or
injury, please read this manual and all instructions prior to using the massager.
WARNING: USE CAUTION WHEN WEARING LOOSE CLOTHING OR
JEWELRY WHILE OPERATING YOUR MASSAGER. LONG HAIR MUST NOT
COME IN CONTACT WITH THE MASSAGER WHILE OPERATING. LOOSE
CLOTHING, JEWELRY, AND HAIR CAN POTENTIALLY GET CAUGHT IN THE
MOVING PARTS OF YOUR MASSAGER.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Using Oils, Lotions or Creams
When using oils, lotions or creams with the Jeanie Rub® massager, Core Products
recommends using a Sheepskin or Fleece Pad Cover to protect the vinyl massager pad.
Because oils, lotions or creams can prematurely crack and erode the vinyl, using a pad
cover will prolong the pad’s life.
Care of Pad
The pad on the Jeanie Rub Massager can be cleaned with a mild detergent. Use of too
much alocohol on the pad may cause it to crack.
Cooling the Massager after Use
Because the Jeanie Rub® massager is an electrical appliance, it can become warm to the touch while in use.
Each massager has a built-in fan to keep the motor from overheating. However, when the massager is turned
off, the fan no longer aids in keeping the motor cool and the massager may remain warm for a few minutes after
use. Core Products recommends allowing the massager to cool to the surrounding air tempera-
ture or to the touch before storing the massager in its proper place.
Special Motor Information: Jeanie Rub® Variable Speed Models
The universal motor found in the Jeanie Rub® variable speed model incorporates carbon
brushes. When the massager is used extensively at very low rpm levels, carbon can build up
inside the motor housing, decreasing the massager’s effectiveness. Core Products recommends
that after each low rpm usage, the massager is run for a few minutes at a higher rpm level to
ensure the built-up carbon is cleaned from the motor housing. This will prolong the life of the
carbon brushes and optimize the massager’s use.
Jeanie Rub®Single Speed Jeanie Rub®Variable Speed
without Accesory Posts
Jeanie Rub®Variable Speed
with Accessory Posts
Jeanie Rub®Single Speed
230v
Model #: PRO-3400 Model #: 3401 Model #: 3402 Model #: 3406
Heavy-duty shaded pole motor Universal brush motor Universal brush motor Heavy-duty shaded pole motor
110-120 v / 60 Hz / 2.0 Amps 110-120 v / 60 Hz / 2 Amps 110-120 v / 60 Hz / 2 Amps 230 v / 50 Hz / 2 Amps
Operates at 3250 rpm Operates at 1600-4600 rpm Operates at 1600-4600 rpm Operates at 3250 rpm
Toggle On/Off Switch Rheostat rotary dial switch Rheostat rotary dial switch Toggle On/Off Switch
Without accessory posts Without accessory posts Accessory posts attached Without accessory posts
7.2 lbs - 3.3 kg 6.05 lbs - 2.7 kg 6.9 lbs - 3.1 kg 7.2 lbs - 3.3 kg
All massagers feature all die-cast aluminum components with powder coated nish, unique four-point, orbital, oscillating
massage therapy action and premium cushioned vinyl massager pad and 13-foot power supply cord with grounding pin.
Each massager is hand-assembled in the United States according to CSA standards for safe consumer use.
Jeanie Rub®Single Speed Jeanie Rub®Variable Speed
without Accesory Posts
Jeanie Rub®Variable Speed
with Accessory Posts
Jeanie Rub®Single Speed
230v
Model #: PRO-3400 Model #: 3401 Model #: 3402 Model #: 3406
Heavy-duty shaded pole motor Universal brush motor Universal brush motor Heavy-duty shaded pole motor
110-120 v / 60 Hz / 2.0 Amps 110-120 v / 60 Hz / 2 Amps 110-120 v / 60 Hz / 2 Amps 230 v / 50 Hz / 2 Amps
Operates at 3250 rpm Operates at 1600-4600 rpm Operates at 1600-4600 rpm Operates at 3250 rpm
Toggle On/Off Switch Rheostat rotary dial switch Rheostat rotary dial switch Toggle On/Off Switch
Without accessory posts Without accessory posts Accessory posts attached Without accessory posts
7.2 lbs - 3.3 kg 6.05 lbs - 2.7 kg 6.9 lbs - 3.1 kg 7.2 lbs - 3.3 kg
All massagers feature all die-cast aluminum components with powder coated nish, unique four-point, orbital, oscillating
massage therapy action and premium cushioned vinyl massager pad and 13-foot power supply cord with grounding pin.
Each massager is hand-assembled in the United States according to CSA standards for safe consumer use.
