Jarv WaveFlex JRV-BTNH300 User manual
USERS GUIDE
Auriculares inalámbricos Bluetooth con banda para el cuello
WIRELESS NECKBAND BLUETOOTH HEADSET
FEATURE S
• Around the neck design using flexible memory
form material, adjustable for convenience and
portability
• Built in sport stabilizer for earbuds that lock in
and stay in
• Magnetic earbuds
• On Board Controls
• Rechargeable battery with Up to 7 Hours of
Talk/Music time
1
PACKAGE CONTENTS
• Jarv Wave Flex Wireless Neckband
Bluetooth Headset
• Micro USB Charging Cable
• 3 sets of Earbud Tips (S,M,L)
• Users Guide
S M L
2
EARBUD CONTROL UNIT:
1. Volume +/Next Track
2. Multi-Function Button - Power/Play/Pause/Pair
3. Volume – / Previous Track
4. Pairing/Power LED Indicator & Microphone
5. Micro USB Charging port
15
4
2
3
3
LED INDICATOR GUIDE
STATUS
Power On
Power Off
Charging
Charging complete
Battery Low
Pairing Mode
INDICATOR
Flashing Blue Light
Red Light then turns off
Red Light
Blue Light
Flashing red every 20
seconds
Red and Blue Light flash
alternately. Once Paired
Blue light will flash slowly
4
GETTING STARTED
To use your Jarv Wave Flex Wireless Neckband
Bluetooth Headset, please follow the steps below:
1. Ensure your Bluetooth headset is fully charged.
2. Pair your Bluetooth headset to a Bluetooth-
enabled device prior to use. (See Pairing your
Headset instructions)
CHARGING YOUR HEADSET
CHARGE FULLY BEFORE USE.
To charge your headset, use the supplied micro
usb charging cable, the battery indicator will turn
red when charging and turn blue once charging is
complete. Initial charging time is approximately 2
hours.
5
GETTING STARTED
To use your Jarv Wave Flex Wireless Neckband
Bluetooth Headset, please follow the steps below:
1. Ensure your Bluetooth headset is fully charged.
2. Pair your Bluetooth headset to a Bluetooth-
enabled device prior to use. (See Pairing your
Headset instructions)
CHARGING YOUR HEADSET
CHARGE FULLY BEFORE USE.
To charge your headset, use the supplied micro
usb charging cable, the battery indicator will turn
red when charging and turn blue once charging is
complete. Initial charging time is approximately 2
hours.
Appx. 2 hours
6
PAIRING YOUR HEADSET
In order to use your Jarv Wave Flex Wireless Neckband
Bluetooth Headset with a Bluetooth-enabled device, you
will first need to pair the two.
1. Place the headset and the mobile phone where they
are easily viewable and no more than 3 ft apart.
2. Ensure that the headset is fully charged
3. Ensure that the headset is powered off
4. Press the Multi-Function
button for approximately 5-6
seconds until the red and blue
light flash alternately which
indicates that you are in Pairing
Mode.
(Note: A blue light will turn on at first
but keep pressing down the pairing
button until it changes to a flashing
blue/red light which indicates that
you are in pairing mode).
5. Activate your mobile phone's Bluetooth pairing
function.
6. Set the mobile phone to search for Bluetooth
devices within range and select “Wave Flex” from
the list of devices shown.
7. If you are prompted for a Passcode enter “0000”
and press “ok” to pair the headset with your mobile
phone. (Note: If the Bluetooth version of your phone
is 2.1, there is no need to enter the passcode when
pairing.)
8. Now you can use your Bluetooth headset to listen
to music and make and receive phone calls.
7
Settings
Bluetooth
Bluetooth
Wave
Flex
Passcode
0000
PAIRING YOUR HEADSET
In order to use your Jarv Wave Flex Wireless Neckband
Bluetooth Headset with a Bluetooth-enabled device, you
will first need to pair the two.
1. Place the headset and the mobile phone where they
are easily viewable and no more than 3 ft apart.
2. Ensure that the headset is fully charged
3. Ensure that the headset is powered off
4. Press the Multi-Function
button for approximately 5-6
seconds until the red and blue
light flash alternately which
indicates that you are in Pairing
Mode.
(Note: A blue light will turn on at first
but keep pressing down the pairing
button until it changes to a flashing
blue/red light which indicates that
you are in pairing mode).
5. Activate your mobile phone's Bluetooth pairing
function.
6. Set the mobile phone to search for Bluetooth
devices within range and select “Wave Flex” from
the list of devices shown.
7. If you are prompted for a Passcode enter “0000”
and press “ok” to pair the headset with your mobile
phone. (Note: If the Bluetooth version of your phone
is 2.1, there is no need to enter the passcode when
pairing.)
8. Now you can use your Bluetooth headset to listen
to music and make and receive phone calls.
8
POWERING ON THE HEADSET
Press and hold down the Multi-Function button for 3
seconds until a blue light appears
POWERING OFF THE HEADSET
Once powered on, Press and hold down the
Multi-Function button for 3 seconds until a red light
appears to power off.
WEARING YOUR HEADSET
The Left / Right indicator is located on the inside of
the neckband headset.
VOICE PROMPTS
A Voice prompt will come on and notify you once the
headset is “Powered On” , “Powered Off” , or
“Connected” when applicable.
0/
Table of contents
Other Jarv Headset manuals
