Jackson Dishmachine Stand M24STD-6 User manual

Jackson MSC, INC.

P.O. BOX 1060

HWY. 25E

BARBOURVILLE, KY. 40906

FAX (606) 523-9196

PHONE (606) 523-9795

www.jacksonmsc.com

Installation Instructions

FOR JACKSON MODEL:

M24STD-6

Dishmachine Stand

August 7, 2006

P/N 07610-003-26-13 Rev. A

M24STD-6 INSTALLATION INSTRUCTIONS

Installation Instructions 07610-003-26-13

Issued: 08-10-2006 Revised: N/A

Tools Required:

• Standard Allen wrench set

• Tube of food-grade silicon

• Silicon gun

• Rag

Time Requirements:

It is expected that it will take 30 minutes to

install the M24STD-6 dishmachine stand.

Notes:

• Ensure that the dishmachine stand is

level prior to placing the dishmachine

on the stand.

• Never attempt to lift a dishwasher on

your own. Always use other personnel

to help or the appropriate lifting devices

to prevent accident and injury.

Steps:

• Inspect the assembly to ensure that

there has been no freight damage. If

there is any damage, contact the

freight carrier immediately.

• Your package should contain the fol-

lowing:

• Stand platform weldment

• (4) legs

• Instructions

• If any of these items are missing, im-

mediately contact Jackson Technical

Service at 1-888-800-5672.

• Remove the items from the box.

• Ensure that the set screws are located

within the leg sockets. If they are miss-

ing, immediately contact Jackson

Technical Service (See Figure 1).

• Verify that the foot of each leg can be

turned; this is how the stand will be ad-

justed in order to level it. Please note

that when assembled, there should be

a minimum of 6” (152.4mm) of space

between the bottom of the stand and

the finished floor.

• Place the legs fully into the leg sockets

of the platform and tighten down the

set screws to secure them in place.

(See Figure 2).

• Once all of the legs are tightly in place,

flip the dishmachine stand over and set

it down on all four legs. Ensure that the

legs are stable.

• If stable, take a small amount of silicon

and apply it to the set screw to cover

any exposed threads and to fill in the

hole for the Allen wrench. (See Figure

3). Note: do not use excessive

amounts of silicon; only enough to

complete the task.

Figure 1—Leg socket showing set screw

Figure 2—Tightening the legs

M24STD-6 INSTALLATION INSTRUCTIONS

Installation Instructions 07610-003-26-13

Issued: 08-10-2006 Revised: N/A

•To mount the undercounter dishmachine,

remove the feet from the frame bottom by un-

screwing them.

•Set the unit on top of the stand (minus the

feet) on the platform, lining up the holes in the

frame to the corresponding holes in the plat-

form.

•Secure the unit to the platform by rein-

serting and tightening the feet.

•Verify that the unit is level prior to making

any utility connections. If the unit is not level,

it may operate inefficiently.

After Maintenance Actions:

• Wipe down the stand to remove any

excess silicon.

• Once the dishmachine is fully hooked

up and operational (per the manufac-

turer’s instructions), operate the ma-

chine and observe it to ensure that

there is no excessive vibration or any

other source of concern.

Preventative Maintenance:

• Keep the area under the platform free

of dirt, soil and debris.

• Clean the stand regularly with a wet

towel to prevent the build-up of residue

and soil.

Figure 3—Applying silicon

Table of contents

Other Jackson Dishwasher manuals

Jackson

Jackson TempStar HH User manual

Jackson

Jackson JV-24 B-BF Operating instructions

Jackson

Jackson Potwashers FL-10 User manual

Jackson

Jackson DISHSTAR HT-E User manual

Jackson

Jackson Hot Water Sanitizing Undercounter Dishmachines... User manual

Jackson

Jackson TEMPSTAR Setup guide

Jackson

Jackson TempStar Series Manual

Jackson

Jackson CREW User manual

Jackson

Jackson RackStar 44 Setup guide

Jackson

Jackson CONSERVER XL2 User guide

Jackson

Jackson R24 User manual

Jackson

Jackson Glasswashers Delta 5 User manual

Jackson

Jackson Rack Conveyor Dishmachine Parts list manual

Jackson

Jackson Hot Water Sanitizing Undercounter Dishmachines... User manual

Jackson

Jackson Gas Heated Door-Type Dishmachines Tempstar... User manual

Jackson

Jackson JFT User manual

Jackson

Jackson Conserver II User manual

Jackson

Jackson CONSERVER XL-E User guide

Jackson

Jackson AJ-44TE User manual

Jackson

Jackson Avenger HT User manual

Jackson

Jackson DISHSTAR HT-E User guide

Jackson

Jackson CONSERVER XL-E Setup guide

Jackson

Jackson DishStar HT User guide

Jackson

Jackson Dynatemp Series Setup guide

Popular Dishwasher manuals by other brands

Electrolux

Electrolux ESI5211LOX user manual

KitchenAid

KitchenAid KUDB230B Use and care guide

Brandt

Brandt BDJ424DB instruction manual

Asko

Asko DSD767UXXL.AU user manual

Beko

Beko DFN26210W instruction manual

NEFF

NEFF S153ITX00E INFORMATION FOR USE

Midea

Midea SV 4.45 wi manual

LG LDF7932 Specifications

Gorenje

Gorenje GV63214 instruction manual

Hotpoint

Hotpoint HDA1100ZWH Installation information

Blomberg

Blomberg LDFN2240W instruction manual

AEG

AEG FFB83836PM user manual

Cylinda

Cylinda DM3220RFD user manual

Atag

Atag DW8214MB manual

GE GLD8000 Series owner's manual

Siemens

Siemens SN23HI02KE INFORMATION FOR USE

Omega

Omega ODW717X instruction manual

BORETTI

BORETTI BVW-683 operating instructions