Jabra PRO 9450 User manual

Other manuals for PRO 9450

13

This manual suits for next models

4

Table of contents

Other Jabra Headset manuals

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications

Plantronics

Plantronics VOYAGER 520 user guide

Blueant

Blueant X5i user manual

Jabra Pro 9450 Mono Flex

How to connect my Jabra PRO 9450 with Aastra 6753i, 6755i,

6757i

Prerequisite:

Jabra PRO 9450 + Jabra LINK 14201-10 + Aastra DHSG cable kit (only

available from Aastra)

In combination with one of the following phones:

Aastra 53i / 55i / 57i / 57iCT

Aastra 6753i / 6755i / 6757i / 6757i CT

From phone firmware 2.5.1.2000 or higher.

Connection:

Aastra DHSG cable:

1. Insert the split end of the Aastra DHSG cable into your phone as

follows.

2. Insert the RJ9 plug (marked green) into the "headset" socket and the

RJ45 plug (marked yellow) into the socket for the expansion module.

14/10/2022 13:07

https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-

103/faq/9f250e87-e72b-4a5f-9960-65c811586e3d

Page 1 of 4

3. Insert the 1-sided end of the Aastra cable marked in blue into the RJ45

adapter.

GN Netcom DHSG cable:

1. Now insert the 1-sided end of the GN Netcom DHSG cable marked in

blue into the free socket of the RJ45 adapter.

2. Connect the split end of the DHSG cable as follows with the Jabra PRO

94x0e base. Insert the RJ9 plug into the socket identified with the

complete "phone" symbol and the RJ45 plug into the socket identified

with "AUX" on the Jabra PRO 94x0 base.

You now have the option of setting up the headset on your phone via the

automatic or manual configuration.

Automatic configuration:

To start the automatic configuration, ask someone to call you on this

phone and wait at least 10 seconds before taking the call. The appropriate

EHS mode should now be installed.

If the automatic configuration has not worked, please select DHSG mode

manually.

14/10/2022 13:07

https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-

103/faq/9f250e87-e72b-4a5f-9960-65c811586e3d

Page 2 of 4

Base setup:

Set the phone set-up switch to position "A".

Microphone level setup:

Remove the cover from the base of the Jabra PRO 9450 and make a call

with the headset, to a colleague for example. If you are too loud or too

quiet to the person you are calling, please use the volume adjuster until

you achieve the optimum volume level.

Phone setup:

With the version 2.5.1.2000, the DHSG mode is deactivated by default and

must be activated via the Aastra.cfg or mac.cfg with the command dhsg:

1.

From version 2.5.2 Options > Default settings > Audio settings > DHSG >

On

Audio mode in the phone settings must be set to "Headset / Speaker":

Options > Default settings > Audio settings > Audio mode > Headset /

14/10/2022 13:07

https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-

103/faq/9f250e87-e72b-4a5f-9960-65c811586e3d

Page 3 of 4

Speaker

Remote call control in combination with an expansion keypad is not

supported.

14/10/2022 13:07

https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-25-707-

103/faq/9f250e87-e72b-4a5f-9960-65c811586e3d

Page 4 of 4