Jabra Link 14201-10 User manual
Jabra Link 14201-10
How to connect my Jabra GN9330e with Aastra Open Phone
6771, 6773, 6775, 71, 73, 75, Aastra 6739i, Aastra 7434 and
7444
Prerequisite:
Jabra GN9330e + Jabra LINK 14201-10
In combination with one of the following phones:
Open Phone 6771 / 6773 / 6775 including IP (previous name: Open
Phone 71 /73 / 75 including IP)
Aastra 6739i
Aastra 7434 / 7444 IP
Connection:
Important: Please note that remote call control for the Jabra GN9330e is
only supported from version "L" or the Date code 9/09.
1. Plug the 1-sided end of the DHSG cable marked blue into the socket of
your phone marked with the “headset” symbol.
2. Insert the split end of the DHSG cable into the Jabra GN9330e base.
Plug the RJ10 plug into the socket marked with a “phone” symbol and
the RJ45 plug into the base socket of the Jabra GN9330e marked with
"AUX".
Software setup:
Put the headset into the base and activate the “DHSG” mode.
Hold down the “phone” button on the base of the Jabra GN9330e for
28/06/2021 20:26
https://www.jabra.ca/supportpages/jabra-link-14201-10/14201-10/faq/3571e53e-c420-
4e6e-a627-4e1d89efc7fc
Page 1 of 3
approx. 6 seconds until the online display (blue LED) on the headset starts
to flash. The current software is displayed to you by activating the volume
controller in the form of the charge display (green LED).
LEDs from left to right:
LED 1 = RHL
LED 2 = DHSG
LED 3 = AEI
LED 4 = MSH
Thereafter, you can switch into the different software modes (LED 1-4)
with the “volume” controller on the headset. To confirm the software has
successfully installed, the base automatically switches back to charge
mode after approx. 15 seconds.
Base setup:
Set the phone setup switch (A-G) to "A".
Phone setup:
Open Phone 71 Menu > User> Settings > Audio > Headset ON
Open Phone 73 / 75 including IP: Menu > Overall Menu> Phone Settings >
Headset ON
Headset answer/end:
28/06/2021 20:26
https://www.jabra.ca/supportpages/jabra-link-14201-10/14201-10/faq/3571e53e-c420-
4e6e-a627-4e1d89efc7fc
Page 2 of 3
As soon as the dial tone signal can be heard in the headset, you can answer
the call by pressing the ”answer/end” button on the headset; by pressing
again the call is ended.
28/06/2021 20:26
https://www.jabra.ca/supportpages/jabra-link-14201-10/14201-10/faq/3571e53e-c420-
4e6e-a627-4e1d89efc7fc
Page 3 of 3
Table of contents
Other Jabra Headset manuals
Jabra
Jabra Evolve 65 User manual
Jabra
Jabra SUPREME UC Instruction Manual
Jabra
Jabra PRO 9460 Duo Operator's manual
Jabra
Jabra WAVE-CORDED Instruction manual
Jabra
Jabra PRO 9460 - 2 User manual
Jabra
Jabra HALO2 User manual
Jabra
Jabra Evolve2 65 User manual
Jabra
Jabra ARROW - User manual
Jabra
Jabra Pro 920 Mono User manual
Jabra
Jabra M5390 User manual
Jabra
Jabra Pro 9450 Mono User manual
Jabra
Jabra SPORT User manual
Jabra
Jabra Elite 25e User manual
Jabra
Jabra GN9120 DECT GAP User manual
Jabra
Jabra BT2046 User manual
Jabra
Jabra PRO 920 Operating instructions
Jabra
Jabra ACTIVE User manual
Jabra
Jabra GN 9120 LR User manual
Jabra
Jabra EASYGO Instruction manual
Jabra
Jabra Pro 9470 Mono User manual
