Jabra GN9330e - USB - Headset User manual

Other manuals for GN9330e - USB - Headset

12

Table of contents

Other Jabra Headset manuals

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications

Plantronics

Plantronics VOYAGER 520 user guide

Blueant

Blueant X5i user manual

How to connect my Jabra GN9330e with Siemens OpenStage

30, 40, 60, 80

Jabra Link 14201-10

Prerequisite:

Jabra GN9330e + Jabra LINK 14201-10

In combination with one of the following phones:

OpenStage 30 / 40 / 60 / 80

Important:

Please note that Remote Call Control is only supported by the Jabra

GN9330e from version "L" or from date code 9/09.

Connection:

1. Plug the 1-sided end of the DHSG cable marked blue into the socket

marked with a "headset" symbol on your phone.

2. Insert the RJ9 plug into the socket with the "phone" symbol and the

RJ45 plug into the socket on the Jabra GN9330e base marked with

"AUX".

EHS setup:

1. Put the headset in the base and activate "DHSG" mode.

2. Hold down the "phone" button on the base of the Jabra GN9330e for

approx. 6 seconds until the online display (blue LED) on the headset

starts to flash. The current EHS is displayed to you by activating the

speaker controller in the form of the charge display (green LED).

11/05/2021 15:31

https://www.jabra.in/supportpages/jabra-link-14201-10/14201-10/faq/befe42f9-1e0c-

4140-9893-da33b8074349

Page 1 of 3

LEDs from left to right:

LED 1 = RHL

LED 2 = DHSG

LED 3 = AEI

LED 4 = MSH

Now you can switch between the different software modes (LED 1-4) by

using the "volume" up/down controller on the headset. To confirm the

EHS has successfully installed, the base automatically switches back to

charge mode after approx. 15 seconds.

Base setup:

Set the phone set-up switch to "A".

Answer/end calls on the headset:

Once the dial tone signal can be heard in the headset, you can answer the

call by pressing the "Answer/end" button on the headset, while pressing it

again will end the call.

11/05/2021 15:31

https://www.jabra.in/supportpages/jabra-link-14201-10/14201-10/faq/befe42f9-1e0c-

4140-9893-da33b8074349

Page 2 of 3

Phone setup:

Important: For equipment EHS 3.18, the headset operation must be set up

additionally on the phone.

OpenStage 40: Menu > Audio accessories > Headset > Cordless

OpenStage 60/80: Menu> User> Audio> Settings> Headset> Cordless

Important: The dial tone signal in the headset is transmitted only if the

standard ring tones are used on your phone. There is no dial tone signal

transfer for mp3 ring tones.

11/05/2021 15:31

https://www.jabra.in/supportpages/jabra-link-14201-10/14201-10/faq/befe42f9-1e0c-

4140-9893-da33b8074349

Page 3 of 3