Jabra GN9330e - USB - Headset Safety guide

Other manuals for GN9330e - USB - Headset

12

Table of contents

Other Jabra Headset manuals

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications

Plantronics

Plantronics VOYAGER 520 user guide

Blueant

Blueant X5i user manual

Jabra Link 14201-10

How to connect my Jabra GN9330e with Aastra Office 70 and

80 or Aastra 5370 and 5380

Prerequisite:

Jabra GN9330e + Jabra LINK 14201-10

In combination with one of the following phones:

Office 70 / 70 IP or 5370 IP

Office 80 / 80 IP or 5380 IP

Connection:

Important: Please note that remote call control for the Jabra GN9330e is

only supported from version "L" or the Date code 9/09.

1. Plug the 1-sided end of the DHSG cable marked blue into the socket of

your phone marked with the "headset" symbol.

2. Insert the split end of the DHSG cable into the Jabra GN9330e base.

Insert the RJ9 plug into the socket marked with a "phone" symbol and

the RJ45 plug into the base socket of the Jabra GN9330e marked

"AUX".

Software setup:

Put the headset into the base and activate the "DHSG" mode.

Hold down the "phone" button on the base of the Jabra GN9330e for

approx. 6 seconds until the online display (blue LED) on the headset starts

to flash. The current software is displayed to you by activating the volume

controller in the form of the charge display (green LED).

14/10/2022 07:08

https://www.emea.jabra.com/supportpages/jabra-link-14201-10/14201-10/faq/e76b2e37-

c6b7-4385-b58b-d0e52d83fd4f

Page 1 of 3

LEDs from left to right:

LED 1 = RHL

LED 2 = DHSG

LED 3 = AEI

LED 4 = MSH

Now you can switch between the different software modes (LED 1-4) by

using the "volume" up/down controller on the headset. To confirm the

software has successfully installed, the base automatically switches back

to charge mode after approx. 15 seconds.

Base setup:

Set the phone set-up switch to "A".

Phone setup:

Menu > User> Settings > Audio > Headset ON

From Release 7.9: Menu> Settings> Audio> Headset> Headset ON

Headset answer/end:

As soon as the dial tone signal can be heard in the headset, you can answer

the call by pressing the "answer/end" on the headset; by pressing again

the call is ended.

14/10/2022 07:08

https://www.emea.jabra.com/supportpages/jabra-link-14201-10/14201-10/faq/e76b2e37-

c6b7-4385-b58b-d0e52d83fd4f

Page 2 of 3

14/10/2022 07:08

https://www.emea.jabra.com/supportpages/jabra-link-14201-10/14201-10/faq/e76b2e37-

c6b7-4385-b58b-d0e52d83fd4f

Page 3 of 3