Jabra GN9125 Duo User manual

This manual suits for next models

5

Table of contents

Other Jabra Headset manuals

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications

Plantronics

Plantronics VOYAGER 520 user guide

Blueant

Blueant X5i user manual

Jabra GN9125 Duo Flex NC

How to connect my Jabra GN9120 EHS / GN9125 EHS with

Alcatel IP Touch 4028, 4038, 4068

Prerequisite:

Jabra GN9120 EHS + Jabra Link 14201-09

Jabra GN9125 EHS + Jabra Link 14201-09

In combination with one of the following phones:

IP Touch 4028

IP Touch 4038

IP Touch 4068

Connection:

Connect the MSH connection cable to the base of the Jabra GN912x EHS

as follows:

2 modular plugs (RJ10+RJ45)

2-sided end: Insert the RJ45 into the socket identified with "AUX" and the

RJ10 into the socket identified with the “phone” symbol on the base.

2-fold Y-coupling end: Insert the 3.5 mm phone jack into the headset

interface and the RJ12 into the bell socket of the phone. The additional

02/11/2021 22:41

https://www.jabra.ca/supportpages/jabra-gn9125/9129-808-215/faq/d8f5ef13-c0f4-4e7a-

99c5-558f443e1d45

Page 1 of 5

socket on the Y coupling remains free in the case of connection to an IP

phone!

Base setup:

The adjustment controller on the base must be set to "A".

EHS setup:

The Jabra GN912x must support and be set up on MSH EHS.

You can check or set it up as follows:

1. Place the headset on the base.

2. Then press the PLUS and MINUS buttons simultaneously for 6 seconds

until the online display on the headset starts to flash.

3. The base will now display to you the EHS currently installed. The online

light indicates "MSH", the pulsating light indicates "RHL", the MUTE

light "DHSG" and the battery display "AEI".

02/11/2021 22:41

https://www.jabra.ca/supportpages/jabra-gn9125/9129-808-215/faq/d8f5ef13-c0f4-4e7a-

99c5-558f443e1d45

Page 2 of 5

4. With the PLUS or MINUS buttons, you can now switch between the

different EHS types

5. To confirm the EHS has successfully installed, the phone automatically

switches back to charge mode after approx. 10 seconds.

Microphone level setup:

1. Please call someone with the headset.

2. You must now simultaneously press the PLUS and MINUS buttons on

the headset which immediately produces a signal tone.

3. You can now increase the microphone volume with PLUS or decrease

the volume with MINUS.

4. To confirm, after approx. 15 seconds a low signal tone sounds in the

02/11/2021 22:41

https://www.jabra.ca/supportpages/jabra-gn9125/9129-808-215/faq/d8f5ef13-c0f4-4e7a-

99c5-558f443e1d45

Page 3 of 5

background. The settings are then automatically saved.

Phone setup with system software 9.xx and higher:

Settings are no longer required for using the headset on the phone. After

correctly adapting the phone plug, a headset symbol must now appear in

the “phone display”. Should the headset symbol not appear, please check

the following settings:

Menu > Settings > Phone > Phone plug > Activate/select headset.

Phone setup with system software below 9.xx:

Important: The "Force Headset" function should not be activated on the

phone, as otherwise it will not be possible to accept external calls!

Menu > Settings > Phone > Phone plug > Force headset OFF

Menu > Settings > Phone > Socket > Activate headset

Dial tone signal transfer / phone setup:

Important: The dial tone signal in the headset is only transmitted if one of

the following call tones has been selected on your phone Standard /

Classic / Cold River / Dooing-Dooing . > Menu > Settings > Dial tone >

Internal / External

In the event that you still do not have a dial tone signal transfer despite

setting the correct ring tone, check the following settings:

Menu > Settings > Phone > Internal/External > other options

No tone, Progressive, Bleep tones > all items must be set to "OFF".

Calls over the headset can be connected/forwarded as follows:

02/11/2021 22:41

https://www.jabra.ca/supportpages/jabra-gn9125/9129-808-215/faq/d8f5ef13-c0f4-4e7a-

99c5-558f443e1d45

Page 4 of 5

Dial phone number > the following now appears in the phone display

"transfer" > now press the appropriate function button next to the phone

display > when connected you must now end the call using the button

identified with the "handset".

02/11/2021 22:41

https://www.jabra.ca/supportpages/jabra-gn9125/9129-808-215/faq/d8f5ef13-c0f4-4e7a-

99c5-558f443e1d45

Page 5 of 5