Jabra GN9120 Flex User manual

Other manuals for GN9120 Flex

22

Table of contents

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications

Plantronics

Plantronics VOYAGER 520 user guide

Blueant

Blueant X5i user manual

Jabra GN9120 Flex Alcatel With EHS

How to connect my Jabra GN9120 EHS / GN9125 EHS with

Aastra Open Phone 63 and 65

Prerequisites:

Jabra GN9120 EHS or Jabra GN9125 EHS + Jabra 8800-00-93 + Aastra AZ

– adapter

Jabra GN9120 Standard or Jabra GN9125 Standard

In combination with one of the following phones:

Open Phone 63 / 65

System:

Open Com 100 from EHS 5.2

Open Com 1000 from EHS 3.2

Connection:

1. Connect the RJ9 to RJ9 connection cable supplied with the headset, to

the socket marked with the "phone" symbol on the base of the Jabra

GN9120 and the other end to the "handset" socket of the AZ adapter.

2. Now insert the 8-pin RJ45 plug of the Jabra 8800-00-93 connection

cable into the "AUX" socket on the GN 9120 base.

3. Please connect the hollow socket connector to the socket on the AZ

adapter marked with the "bell" symbol and insert the 6-pin modular

plug into the "second handset" socket on the AZ adapter.

EHS setup:

The Jabra GN912x must support and be set up to RHL EHS.

29/06/2021 13:03

https://www.jabra.hk/supportpages/jabra-gn9120/9120-281-11/faq/33fb12af-3bfb-4844-

af54-c755ef74522e

Page 1 of 3

Proceed as follows to check the EHS mode:

1. Place the headset in the base.

2. Press the PLUS and MINUS buttons simultaneously for approx. 6

seconds until the online display on the headset starts to flash.

3. The base will now display to you the EHS currently installed. The online

light indicates "MSH", the pulsating light "RHL", the MUTE light "DHSG"

and the battery display "AEI".

With the PLUS and MINUS buttons, you can now switch between the

different EHS types.

To confirm the EHS has successfully installed, the base automatically

switches back to charge mode after approx. 10 seconds.

Base setup:

Set the phone set-up switch to "A".

29/06/2021 13:03

https://www.jabra.hk/supportpages/jabra-gn9120/9120-281-11/faq/33fb12af-3bfb-4844-

af54-c755ef74522e

Page 2 of 3

Microphone level setup:

Please call someone with the headset. You must now simultaneously press

the PLUS and MINUS buttons on the headset which immediately produces

a signal tone.

You can now increase the microphone volume with PLUS or decrease the

volume with MINUS.

To confirm, a low signal tone sounds in the background after 15 seconds.

The settings are then automatically saved.

Phone setup

In the phone, you must activate "REMOTE HEADSET" from the options

provided.

>Menu > Settings > Peripherals > Add. phone selection > REMOTE

HEADSET

(new setting on the phone: DECT HEADSET)

29/06/2021 13:03

https://www.jabra.hk/supportpages/jabra-gn9120/9120-281-11/faq/33fb12af-3bfb-4844-

af54-c755ef74522e

Page 3 of 3