Jabra GN 9050 User manual

GN 9050 Beta User Manual

GN 9050 WIRELESS HEADSET

SYSTEM

BETA USER MANUAL

GN 9050 Beta User Manual

Component list

1. Base station

2. Base stand

3. Remote

4. Interface cord

5. AC adapter

6. Battery

Remote Beltpack Functions

1. Headset Mode indicator-blinks when the system is in Headset mode, no light when

in handset mode.

1. Volume control- press + to increase volume and – to decrease volume

2. Mute button: Press to activate mute and press again to unmute.

3. Headset/Handset button/ handset lifter button: Press to enter Headset or Handset

mode (LEDs on the remote and base station light in Headset mode) No Lights in

Handset Mode. For use with optional handset lifter device, see handset lifter user

manual.

Base Functions

1. Transmit Settings: Adjusts the volume of your voice.

2. Telephone Compatibility Settings: Fine-tunes the system to your telephone system.

3. Battery Charge indicator: Lights when the remote is properly seated in the base

charger, blinks when battery is fully charged.

4. Base/Tone Control: Allows for choice of base and tone on receiver volume.

GN 9050 Beta User Manual

Audio Indicators

Battery Information

Basic Feature Set:

•2.4GHz, Digital FH-SST radio system

•Up to 150 feet range from base station

•Minimum of 50 concurrent users in one location w/ encryption/ security.

•System continuously checks link availability and generates a “no link” beep in the

belt unit in the event the base unit and belt unit cannot communicate.

•6 hours minimum portable talk time with standard battery

•12 hours minimum talk time with optional spare battery

•Connects to almost any type of telephone set via the handset port (RJ-9 port)

•Transmit volume adjustable at base unit (8 steps) via up/down buttons

•Receive volume (loudness) adjustable at portable unit (8 steps) via volume up/down

controls

•Belt unit has a mute button

•Base unit docks and charges the belt unit and can also charge a second spare

battery

−Fast charging allows batteries to fully charge within 3 hours maximum.

•ON/OFF switch located on remote.

•Beep tones are used in the belt unit (earpiece of the headset) to indicate low battery,

mute, max and min volume and out of range

•Base unit has LEDs to indicate charging status, in-use indication

•Compatible with ReadiLine and GN Netcom handset lifter accessory

Mute Tone sounds in headset every 15 seconds

Out of Range Tone sounds in headset every 10 seconds

Low Battery Tone sounds in headset every 20 seconds

Volume Tone sounds in headset at max and min levels

Battery Type Nickel Metal Hydride (NiMH) 3.6 V 500 mAH

Capacity on-line Fully charged battery provides 6 hours of talk time

Capacity off-line Fully charged battery provides 80 hours

Recharging Time Maximum of 3 hours

Battery Life 2 years if battery is recharged when not in use

GN 9050 Beta User Manual

BASE FRONT

In-Use

Indicator

Spare battery

charge

indicator

Remote

charge

indicator

Where Remote docks

to charge

GN 9050 Beta User Manual

AUX Jack

(underneath

plastic form)

Spare battery

slot

Power

Jack

Base Stand

To Phone

RJ-9

Host Port

In-Use

Indicator

Spare battery

charge

indicator

Contacts for

Spare battery

slot

BASE REAR

Handset

GN 9050 Beta User Manual

The base unit contains the following Indicators/Buttons/Switches/Controls:

•Status Indicator: This indicates Base unit link status. The LED will be

constant when a link is established and while in headset mode.

•Remote unit Charge Indicator: This is a red/green LED that indicates red

when charging and green when fully charged.

•Spare Battery Charge Indicator: This is a red/green LED that indicates red

when charging and green when fully charged.

•Transmit Switch: This is a single, 8-position sliding switch that allows the user

to fine tune their transmit level. 1= low 8 = high.

•Telephone Compatibility Switch: 8-position compatibility switch configures the

9050 to telephone it will be used with. Allows for user to Connection used for

manufacturing and test purposes.

•Tone/Bass Control: Allows the user to choose between tone and bass

balance for receive volume.

GN 9050 Beta User Manual

BELT UNIT, FRONT

Mute

Button

Volume Up

Button

Volume Down

Button

On/Off

Button

Removable

Battery Pack

(behind)

In-Use

Indicator

Headset

2.5mm plug

Clip (behind)

Removable

Battery Pack

Headset

2.5 mm Plug

BELT UNIT, REAR

Clip

Clip contacts

(inside TBC)

Belt Unit

(behind)

GN 9050 Beta User Manual

The Remote unit contains the following Indicators/Buttons/Switches/Controls:

•““ON/OFF/Handset Lifter” Button: This button attempts to initiate a voice link

or terminates a link depending on the current link state as well as serves as

the handset lifter control button that raises and lower the handset on the

telephone when using it with the optional GNN handset lifter or Hello Direct

ReadiLine.

•“VOL UP” & “VOL DOWN” Buttons: These buttons control the receive volume

level in eight steps.

•“MUTE” Button: This button mutes the transmit path of the microphone.

Battery State:

Both the belt unit battery charger and the spare battery charger will employ smart

battery charging techniques to allow shorter recharging times. Each recharging circuit

will have a corresponding charge LED to indicate charge status.

CHARGE INDICATOR DESCRIPTION

OFF – Battery not present / not charging

RED – Recharging

GREEN – Fully charged

GN 9050 Beta User Manual

Setting Up

1. Connect all Cords.

Unplug the handset cord from the base of the telephone. Plug the Interface cord

into the vacated handset cord port on the telephone. The location of this port is

different for each phone and is often on the underside of the phone. Some

telephones must be programmed for headset use.

2. Attach the Base Stand.

Carefully insert the three plastic clips into the vacant base station holes.

3. Attach the battery to the remote:

Press the two buttons located on the side of the battery while carefully inserting

the plastic tabs into the remote. You should hear it click into place.

GN 9050 Beta User Manual

4. Connect the Headset to the Remote.

5. Charge the Remote

Slide the Remote into the Charger on either side of the base station. The Battery

Charge light on the front of the base station illuminates. Charge the battery for a

full three hours. You may use the handset while the battery charges.

Note: Battery Charge Indicator blinks green when battery is fully charged.

Other manuals for GN 9050

Table of contents

Other Jabra Headset manuals

Jabra

Jabra UC VOICE User manual

Jabra

Jabra Engage 65 User manual

Jabra

Jabra Evolve2 65 User manual

Jabra

Jabra Evolve 75 MS Stereo User manual

Jabra

Jabra GN1000 User manual

Jabra

Jabra 405-Flex-SF User manual

Jabra

Jabra Evolve 65+ UC Stereo User manual

Jabra

Jabra SPORT COACH User manual

Jabra

Jabra GN 2000 - ANNEXE 736 User manual

Jabra

Jabra BT2040 - Headset - In-ear ear-bud User manual

Jabra

Jabra BT2010 - ANNEXE 746 User manual

Jabra

Jabra GN9330e - USB - Headset User manual

Jabra

Jabra GN 4150 User manual

Jabra

Jabra MOTION UC User manual

Jabra

Jabra BT350 - Headset - Over-the-ear User manual

Jabra

Jabra EASYGO User manual

Jabra

Jabra EVOLVE2 50 User manual

Jabra

Jabra Engage 65 User manual

Jabra

Jabra FREEWAY Reference guide

Jabra

Jabra PRO 9465 DUO Operator's manual

Jabra

Jabra PRO 930 User manual

Jabra

Jabra rox wireless User manual

Jabra

Jabra PRO 935 User manual

Jabra

Jabra FreeSpeak 100-91030000-02 User manual

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications

Plantronics

Plantronics VOYAGER 520 user guide

Blueant

Blueant X5i user manual