Iwc AQUATIMER DEEP THREE User manual

www.iwc.com

OPERATING INSTRUCTIONS

使用说明

使用說明

取扱説明書

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

КЕРІВНИЦТВО З ВИКОРИСТАННЯ

IWE01442/08.14/0.25

REF. 3557

REFERENCE 3557

AQUATIMER

DEEP THREE

AQUATIMER DEEP THREE

— 3 —

AQUATIMER DEEP THREE

— 5 —

OPERATING INSTRUCTIONS

English

— 21 —

使用说明

简体中文

— 37 —

使用說明

繁體中文

— 53 —

取扱説明書

日本語

— 69 —

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

Русский

— 87 —

КЕРІВНИЦТВО З ВИКОРИСТАННЯ

Українська

AQUATIMER DEEP THREE

— 5 —

Welcome to the small circle of individuals who, if we are to be

absolutely precise, demand slightly more of a watch than absolute precision. Appre-

ciation of a watch is more than mere appreciation of the correct time. It is enthusiasm

for an ingenious idea. For the interplay between precision and imagination. Between

time and timelessness. Between boundaries and infinity. Between laws to which the

entire world is subject, and taste, which cannot be dictated to anyone. That is why,

since 1868, we have been devoting rather more of our time to watches that must not

only run with absolute precision but which also, with every passing second, exert a fas-

cination with the great achievements of master craftsmanship: a fascination with new

inventions of a technical, material or formal nature, even if they are concealed in minute

details that are perhaps not even visible. You are now the owner of a beautiful new

example of this IWC tradition. We would like to congratulate you on your choice and

send you our best wishes for the time you will spend with your watch, which perhaps

cannot be described with any greater accuracy than it is here.

IWC MANAGEMENT

AQUATIMER DEEP THREE

— 6 —

THE TECHNICAL REFINEMENTS OF THE

AQUATIMER DEEP THREE

Your IWC watch shows you the time in hours, minutes and seconds, as well as the

date, current dive depth and maximum depth achieved during your dive. The water

pressure (and thus dive depth) is measured by a pressure converter and transmitted

to the indicators, which show current dive depth and maximum dive depth down

to 50 metres. The depth gauge can be reset to zero using the adjustment crown to

correct fluctuations in atmospheric pressure. The dive time is read off on the internal

rotating bezel, which for safety reasons can only be turned anticlockwise. Your watch

is water-resistant 10 bar and protected by a sapphire glass of hardness grade 9 on

Mohs’ scale. The mechanical movement with automatic winding has a power reserve

of approximately 42 hours when fully wound. To ensure that this extraordinary watch

continues to perform faultlessly in the future, it is essential to observe a few important

operating instructions.

AQUATIMER DEEP THREE

— 7 —

1Hour hand

2Minute hand

3Seconds hand

4Date display

5External rotating bezel

6Internal rotating bezel

7Dive depth scale in metres

Depth indicator (blue) 8

Maximum depth indicator (red) 9

Screw-in crown 10

Adjustment crown with 11

integrated pressure converter

Reset push-button 12

Scale showing maximum 13

depth (MAX. DEPTH)

AQUATIMER DEEP THREE

— 8 —

FUNCTIONS OF THE CROWN

X — Normal position (screwed in)

0 — Winding position

1 — Date setting

2 — Time setting

NORMAL POSITION

This watch has a screw-in crown. Screwing the crown in to its normal position (X)

prevents the inadvertent adjustment of the time or date and also acts as a double

seal to prevent water from seeping into the case. To release the crown, unscrew it by

turning it to the left, where it automatically assumes position 0, the winding position.

By depressing the crown into position X and turning it to the right at the same time, it

is screwed down firmly again and secured.

Important: Although the watch is water-resistant in positions 0, 1 and 2, the crown

should always be screwed in again for normal use (position X). The crown must not be

moved or used for any purpose whatsoever while under water.

X 0 1 2

AQUATIMER DEEP THREE

— 9 —

WINDING POSITION

With the crown in the winding position (0), you can also wind the automatic movement

by hand. A few revolutions of the crown are enough to start the movement. However, it

is better to wind the watch by turning the crown through approximately 20 revolutions

as this will ensure maximum accuracy. The crown must always be in position X when

you are wearing your watch.

DATE SETTING

If a month has fewer than 31 days, you will need to set the date manually to the first

day of the following month. Release the screw-in crown and pull it out to position 1.

You can now set the date by turning the crown to the left (direct advance). You should

not use the rapid-advance function between 8 p.m. and 2 a.m. because the move-

ment automatically advances the date during this period.

TIME SETTING

Pull out the crown to position 2. This will stop the movement. To set the time accurate-

ly to the second, it is best to stop the movement as the seconds hand passes 60. Now

move the minute hand a few minute strokes beyond the time to be set. Then position

the minute hand by moving it gently backwards until it is exactly above the correct

minute stroke. This ensures that the minute hand begins to move immediately when

you restart the movement. To start the seconds hand, push in the crown to position 0.

When setting the time, please be aware of the date change, which always takes place

at 12 midnight. If this change has already taken place at 12 noon, you must move the

hands forwards by 12 hours.

AQUATIMER DEEP THREE

— 10 —

Important: Although the watch is water-resistant in positions 0, 1 and 2, the crown

should always be screwed in again for normal use (position X).

READING THE TIME IN THE DARK

The dial, the hour and minute hands, the marking on the internal rotating bezel, as

well as the dive depth scale of your watch have luminescent elements that allow you

to read the time effortlessly even in total darkness. The two luminescent elements at

12 o’clock serve as a reference point.

MARKING THE START OF A DIVE

The triangle on the internal rotating bezel can be aligned with the minute hand by turning

the external rotating bezel. The desired point in time (for example the time of entering the

water at the start of the dive) can be set in this way. You can read off the elapsed time

(for example the duration of the dive) on the internal rotating bezel. For safety reasons,

the internal rotating bezel can only be rotated in an anticlockwise direction. The rotating

bezel is indexed audibly and perceptibly in one-minute steps, and it is also legible in the

dark thanks to the luminescent markings.

This manual suits for next models

Table of contents

Languages:

Popular Watch manuals by other brands

Pandora

Pandora WATCH2 quick guide

Casio

Casio QW-4343 Service manual

Suunto

Suunto X6 user guide

Seiko

Seiko N830 instruction manual

MotionX

MotionX 365 user guide

Garmin

Garmin VENU SQ 2 owner's manual

QCY

QCY Watch GTC manual

Canyon

Canyon Cindy CNE-KW41WP quick guide

Esq

Esq Watches Operating instructions warranty & service guide

Crane

Crane AA5-CDSM-3A user manual

Timex

Timex W-214 product manual

DETOMASO

DETOMASO MATERA manual

Geemarc

Geemarc Watch N Shake user guide

LORUS

LORUS W590 instruction manual

STENLILLE

STENLILLE Actío user manual

Casio

Casio 5594 Operation guide

Sinn

Sinn HUNTER'S WATCH 3. Edition manual

Slazenger

Slazenger SLZ800 manual

iwc AQUATIMER DEEP THREE User manual

Popular Watch manuals by other brands