ISHIDA Uni-5 User manual

Other manuals for Uni-5

1

Table of contents

Other ISHIDA Scale manuals

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual

User’s Manual

Ver. 1.02

IMPORTANT

•Read this manual thoroughly, and do not perform installation,

operation, maintenance, or inspection unless you fully

understand all of the contents.

•Keep this manual in a safe place where you can refer to it

easily while installing, operating, and carrying out

maintenance or inspections.

RS-61004-11 1.02

© ISHIDA Co., Ltd. 2008 All rights are reserved.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means

mechanical, electronic, photocopying, recording, or otherwise without prior written permission of ISHIDA.

Chapter 12 ADJUSTMENT MODE

ADJUSTMENT MODE

12.1 ADJUSTMENT MODE ENTRY

1. Make sure that the initial screen is displayed.

2. Press the [MODE] key on the key sheet.

The Operation Mode screen appears. Then, press the [ADJUST] button on the screen

3. The Adjustment Menu Select screen appears.

12

UNI-5 User’s Manual 12-1

Chapter 12 ADJUSTMENT MODE

12.2 DATE / TIME ADJUSTMENT

1. Press the “TIME / DATE SET” field on the Adjustment Menu Select screen.

2. The Time/Date Set screen appears.

3. To change the date, enter a new date and press the “DATE” field.

EXAMPLE 22 June, 2007

12-2 UNI-5 User’s Manual

Chapter 12 ADJUSTMENT MODE

4. To change the time, enter a new time and press the “TIME” field.

EXAMPLE 13:50:00

5. To register new date and time, press the [SET] button.

6. The confirmation screen appears. Then, press the [EXEC] button for execution.

UNI-5 User’s Manual 12-3

Chapter 12 ADJUSTMENT MODE

12.3 TOUCH PANEL ADJUSTMENT

1. Press the “TOUCH PANEL” field on the Adjustment Menu Select screen.

2. The Touch Panel screen appears.

3.

Press the [+] button on the upper left of the screen.

4. Press the [+] button on the lower right of the screen.

12-4 UNI-5 User’s Manual

Chapter 12 ADJUSTMENT MODE

5. Press the [SET] button to confirm calibration.

UNI-5 User’s Manual 12-5

Chapter 12 ADJUSTMENT MODE

12.4 DISPLAY CHECK

1. Press the “DISPLAY CHECK” field on theAdjustment Menu Select screen.

2. The Display Check (Vertical) screen appears.

Press the [-] or [+] button to adjust vertical brightnesses for the operator and customer

displays.

3. Press the [HORIZONTAL] button to change to the horizontal display check screen.

4. The Display Check (Horizontal) screen appears.

Press the [-] or [+] button to adjust vertical brightnesses for the operator and customer

displays.

12-6 UNI-5 User’s Manual

Chapter 1 BEFORE USE

BEFORE USE

1.1 SPECIFICATIONS

Items Descriptions

Use conditions Temperature: 5 to 35°C

Humidity: 30 to 85%, Non condensing.

Power supply: AC100 – 240V, 50 / 60Hz

Power consumption 1.0A/0.5A

Weight Bench type: Approx.11.5 kg

Pole type: Approx.12.5 kg

Weighing capacity 15 kg: 0 to 6/0.002 kg, 6 to 15/0.005 kg

Weighting accuracy 1/3000

Operator/Customer display 7.0 inch color, monochrome liquid crystal with back light, 480 X

234dots

Printing method Direct thermal method

Thermal head 2 inches (448dots) and 8 dots/mm

Printing speed 100mm/second, 120mm/second

Note: The printing speed may vary according to label conditions.

Printing effective size 56mm

Label size Label width: 30mm to 60mm

Label length: 20mm to 150mm

Number of label cassettes 7 cassettes

Input/Output LAN 1 channel

USB 1 channel

CF 1 channel

Drawer 2 channels

Program store medium Flash ROM (32M bytes)

1

UNI-5 User’s Manual 1-1

Chapter 1 BEFORE USE

1.2 MODEL VARIATIONS

Bench Type

Pole Type Elevated Type

Self-service Type

1-2 UNI-5 User’s Manual