IRiver Story HD User manual
USER GUIDE
STORY HD
Contains Reader®
Mobile technology by
Adobe Systems Incorporated
CONTENTS
Getting Started
Components
Device Controls
Using the keyboard
Power Management
Connecting the Story HD
Using Adobe Digital Editions
Using Google eBooks
01
02
Using Story HD
Home Screen
Viewing Books
Setup
03
Other Information
Important Safety Information
Troubleshooting
DISCLAIMER
Copyrights
Certification
Registered Trademark
Exemption
03
04
05
06
08
11
13
15
18
22
24
26
27
28
39
39
39
Components
Getting Started
Story HD
The Basics: Explains basic functions of your Story HD.
Product Warranty: Please keep this in a safe place for use during any
warranty repairs.
USB Cable: Connects the device to the computer.
03
In the box you will find your StoryHD, the Basics of Story HD and the USB
cable for charging.
The Basics
& Product Warranty
USB Cable
Getting Started
04
1
2
3
4
EPD (Electronic
Paper Display)
SD Card Slot
USB Port
Power
The EPD makes you feel as if you are
reading a paperback book.
Insert a SD card to view and would open
the files on the card.
Connect to the computer to transfer files or
connect to the computer recharge.
Turn off the power by sliding and holding
Switch to standby mode by sliding briefly
3
2
4
1
Device Controls
The specific wording on the exterior of the device may vary slightly
depending on your device's model.
Getting Started
05
1 3 6542
11 12 13 14 15 16 17
7 8
9
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
HOME
BACK
Left arrow
Down arrow
Up arrow
Right arrow
ENTER
OPTION
DEL
ENTER
Shift
SYM(Symbol Key)
Text size
Rotation
Space
BACK
Arrow keys
Move to the home screen.
Move to the previous screen.
Move to the previous page.
Move down the list.
Move up the list.
Move to the next page.
Confirm and execute the selected item.
Display the Option window.
Delete typed characters and selected items.
Confirm and execute the selected item.
Enter capital letters.
Displays number and symbol keyboard.
Adjust text size of screen.
Rotate page orientation.
Add space / Mark as a favorite.
Move to the previous screen.
Navigate in four directions.
Using the keyboard
Getting Started
06
Power Management
1. Sliding the [Power] tab when the device is on will switch the
product to Sleep Mode.
2. Sliding the [Power] tab again will terminate Sleep on.
Switching to Sleep Mode
1. Slide the [Power] tab in the direction of the arrow and the device
will boot up.
2. When the Story HD is on, slide the [Power] tab in the direction of
the arrow and hold for 3 seconds to power down.
Story HD supports an automatic power-saving feature to minimize battery
consumption. You can customize Auto Power Off and Auto Sleep settings
by going to Power Settings in Option Menu, the device will be automati-
cally turned off when keys are not operated for a specified time. (Refer to
page 23)
Power on/off
Getting Started
07
1. Turn on the computer and connect the device with your computer.
The internal battery on the device will charge automatically.
Charging the battery by connecting to your computer
Using the battery properly - Page Turn Time: Max. 14,000 page views
Do not use any cables other than the USB cable provided with the
product. It could cause the product to malfunction.
Please verify that the product is connected to a high-powered, USB 2.0
port. Some low-powered USB ports built into certain peripheral devices,
such as certain types of keyboards and USB hubs without internal power
may not provide in sufficient amount power to charge the product. If the
computer is switches to Sleep Mode, the product may not charge.
Charge and store the product only at room temperature.
Please do not expose the device to extreme temperatures while recharging.
The rechargeable battery is a consumable product and the available usage
time of the fully charged battery diminishes over time.
The battery will be fully charged on the device within about 4.5 hours.
(Based on a fully discharged battery that is and powered off).
The Charging times may vary if the device is used during recharge.
If the battery has been completely discharged and has not been used for
a long time period of time, the product will not boot until it has been
charged for at least ten minutes.
1. If the product is unresponsive to key presses, sliding and holding
the Power tab for more than 20 seconds will reset the product.
Using the Reset Function
Current time and memory data will be preserved even after using the reset function.
To avoid damaging the memory, please do not use the reset function while
the device is in use.
Power On
Getting Started
08
1. Turn on the device and computer.
2. Upon connecting the device to your computer, you will see the
screen where you can select the connection mode.
- Charge Battery: The device is currently being charged.
- Connect Removable Disk: The connection between the device and
a computer has been established for file transfer.
Connecting to your computer
Connecting the Story HD
Do not use any other cables other than the USB cable provided with the
product. It could cause the product to malfunction.
For a successful computer/USB connection, please disable all computer
or device functions. Please verify that the product is connected to a
high-powered, USB 2.0 port. Some low-powered USB ports built into
certain peripheral devices, such as certain types of keyboards and USB
hubs without internal power may not provide sufficient amount power to
charge the product.
1. Safely disconnect the product from your computer by clicking the
icon on the taskbar of the computer screen.
2. Confirm that the device is disconnected by clicking [Confirm].
Disconnecting the device
Getting Started
09
1. After selecting files/folders to copy from your computer, drag and
drop the selected file/folder to the added Story HD drive.
2. Files (or folders) will be transferred to folders below according to
their content type.
- E-Book : book - Image : image
Transferring files to the Device
Depending on the operating system, (Windows XP, Macintosh OSX, etc.)
the icon may be hidden from the taskbar. Hidden icons can be displayed
by clicking the indicator.
If programs such as Windows Explorer or Windows Media Player are
being used, the product may not be able to disconnect safely.
Make sure that the product is safely disconnected using the above steps
after all the active application programs are closed. If safe disconnection fails,
please try again later. Failure to safely disconnect could result in data loss.
Please connect the USB cable properly.
Powering down the computer and/or the product or disconnecting the USB cable
while copying and/or moving folders could cause serious damage to the memory.
The data transfer rate may differ depending on the computer or OS environ-
ment available in your region.
Getting Started
10
1. Select the files/folders to be deleted, right-click on them and select
[Delete].
2. Click [Yes] when the [Confirm File/Folder Deletion] window appears
and the selected files/folders will be deleted.
Deleting Files (Folders) from the Product
1. Power down the device
2. Open the cover of SD Card slot.
3. Place the SD card in the slot
(see the figure on the right)
and press gently.
3. To remove, gently press down
again and the SD card will eject
itself.
Inserting/removing the SD card
Other manuals for Story HD
1
Table of contents
Other IRiver Ebook Reader manuals
