62
Safety Instructions
All safety and operating instructions should be read before this product is operated and should be retained
for further reference. Please adhere to all the warnings on this product and in these operating
instructions. Please follow these instructions carefully.
Power. Only use the power source indicated on the device. Devices equipped with a grounded plug
should only be used with a grounded type outlet. In no way should this grounding be disconnected,
modified or suppressed.
Keep Away From Harmful Substances
To prevent the risk of electric shock and fire, do not expose this device to rain, humidity or intense heat
sources (such as radiators or direct sunlight). Avoid using this equipment in environments where there is
excessive heat, dust, moisture, chemicals, vibration or mechanical shocks.
Slots and Openings. These are designed into the device for ventilation and to avoid overheating. Always
ensure these openings remain clear. Do not attempt to insert anything into these openings under
any circumstances. If liquids have been spilled on, or objects have fallen into the product it must be
checked by a qualified technician before re-using.
DO NOT OPEN SYSTEM DUE TO HIGH VOLTAGE.
DO NOT IMMERSE IN WATER.
If you have any queries regarding these safety instructions or how to maintain the unit please do not
hesitate to contact us on:
Servicing. Do not attempt to service this product yourself. Should an unauthorised person attempt to
either open the covers or service our products, it may invalidate your Limited Factory Warranty. In
addition, opening or removing covers and screws may expose you to electric shocks or other hazards.
Refer all servicing to qualified service personnel.
Environmental
WEEE and RoHS Compliance. This product been manufactured and sold in accordance with the
requirements of the EC WEEE and RoHS directives. Please return all end-of-life items to your supplier, or
Interspace Industries directly, for appropriate disposal.
Packaging Materials:
Cardboard box: Grade 150K/T ‘B’ (Single Walled Corrugated- Brown Kraft)
Protective Foam: Grade HLB 22 Grey Foam (High Load Bearing)
7
Network Power.
If using the i2Net you have a couple power options. The USB power used for the unit does
not have enough energy to place power on the Network as well,
Use a computer or USB power at both
Use 12V-30V DC at either end will allow a diversity Aerial system and additional
products such as Confidence lamp and wired button.
A separate i2Net power supply can be used for local power and to help with very long
cables.
Settings
Brightness
Adjust the brightness of the screen for the environment you are using it in.
Unit ID
Shows the unique net addresses of the devices on the network - No auto hide on cue.
Diagnosis
i2Net Pwr - shows the current Voltage at that unit from (or out to) the network
Balance - shows that the data presented to the unit is in balance i.e. not a broken
cable and missing pin 2 or pin 3.
RX & TX- Data Packets sent and received to the network shows data is present.
CRC-Errors of data - corrupted data
NVM- Read/Write Cycles, to show memory storage cycles
EN
