Intermec AC14 User manual
Heading 1
Specifications
Charging Batteries Where to Find More Information
Quick Start Guide
AC1 4-Slot Battery Charger
1
2
You may need additional information when working with the AC1 and CK30 or CK31 in a
data collection system. Please visit our web site at www.intermec.com to download our
current manuals in PDF format. To order printed versions of the Intermec manuals,
contact your local Intermec representative or distributor.
Patent Information
Product is covered by one or more of the following
patents: 5,052,943; 5,195,183; 5,317,691; 5,331,580;
5,544,010; 5,644,471. There may be other U.S. and
foreign patents pending.
You can charge up to four batteries at one time in the charger. The charger fully charges
the batteries in about 5 hours.
To charge batteries
With the battery contacts facing the
charger, slide the battery into one of the
four slots.
Push the battery into the slot to engage
the latch. The Status light for that slot
changes from yellow to green or red to
indicate the battery charge status. See
“Understanding the Status Lights” to learn
what the Status light colors mean.
To remove batteries
•Press the button for that slot and
slide the battery up and out.
Electrical ratings: x12V 4A
Requires Intermec AC power supply (Model 073573)
~100 to 240 VAC, 50 to 60 Hz
WorldwideHeadquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax425.355.9551
www.intermec.com
©
2007Intermec Technologies
Corporation. All rights reserved.
AC1 4-Slot Battery Charger Quick Start Guide
*073530-006*
P/N 073530-006
What Is the AC1? Installing the AC1 Understanding the Status Lights
The AC1 4-Slot Battery Charger (P/N 852-904-XXX) is an accessory for the CK30 and CK31
Handheld Computers. You use the battery charger to charge up to four batteries at the
same time.
This guide explains how to install and use the battery charger.
What YouNeed
To use the charger, you need:
•an AC power supply (Model 073573).
•an AC power cord.
You need to purchase the appropriate power cord for your location. For more information,
contact your Intermec sales representative.
This table explains what the different colors of the Status lights mean.
Youmust use the appropriate Intermec power supply with this device or
equipment damage may occur.
AC1 4-Slot Battery Charger Quick Start Guide
1
2
Place the battery charger on a flat, stable, and clean surface that is within 1.5 m
(5 ft) of an AC power outlet.
Connect the AC power supply to the power connector on the battery charger
and to an AC power outlet. The Status light in each button turns on, showing
that the battery charger is ready to use.
To prevent fire or electric shock, do not expose the AC1 to rain or moisture.
Status light
(4 places)
Power
connector
Button
(4 places)
Color Description
No Color The battery charger is not receiving power. Make sure the power supply
is connected properly to a powered AC outlet.
Steady Yellow The battery charger is connected to AC power and is ready to charge.
Flashing Green The battery is charging.
Steady Green The battery is fully charged.
Flashing Red The battery is not charging. Try these solutions:
• Make sure the battery is firmly installed in the charger.
•Make sure the power supply is connected properly to a powered AC
outlet.
• Make sure the charging pins on the AC1 and the contacts on the
battery are clean.
Other manuals for AC14
1
This manual suits for next models
1
Table of contents
Other Intermec Batteries Charger manuals
Intermec
Intermec ScanPlus 1802 Manual
Intermec
Intermec AC4 Manual
Intermec
Intermec AC15 Manual
Intermec
Intermec TZ2400 User manual
Intermec
Intermec PB42 User manual
Intermec
Intermec Janus 2010 User manual
Intermec
Intermec AK10 Manual
Intermec
Intermec IP30 User manual
Intermec
Intermec AC1 User manual
Intermec
Intermec AC13 Manual
Intermec
Intermec CN3 Series User manual
Intermec
Intermec AC3 User manual
Intermec
Intermec AC10 Manual
Intermec
Intermec CK60 Ethernet Multidock User manual
Intermec
Intermec AC16 User manual
Intermec
Intermec CN3 Series Manual
Intermec
Intermec AC4 User manual
Intermec
Intermec AC3 User manual
Intermec
Intermec CN2 Assembly instructions
Intermec
Intermec Z2400 User manual
