www.instar.de 6
e data communication via the household power grid is encrypted to ensure your pri-
vacy. You can activate the protected communication between two adaptors (once they
are both connected to an outlet) by simply pushing the Pairing Button next to the eth-
ernet port (s. No 4 on page 3).
If you have already secured existing IN-LAN adaptor using the Pairing Button, use
the same method to integrate further adaptors. To do so, press the Pairing Button of
one of your network’s existing adaptors (3-8 seconds), then press the Pairing Button of
your new IN-LAN adaptor (3-8 seconds). at’s it - the new adaptor is now integrated
in your network. To integrate additional adaptors into your network, please repeat the
steps above.
To exclude one IN-LAN adaptor from an existing network, press its Pairing Button for
more than 10 seconds. e device will be assigned with a new random encryption key
and will no longer be able to access the network. To integrate the adaptor into a dierent
IN-LAN adaptor network, follow the steps described above.
Press the Pairing Button of one adaptor for more than 10 seconds to restart it. en
press each Pairing Button for 3-8 seconds to pair both adaptors. at’s it - the IN-LAN
Indicator lights up and the IN-LAN adaptor network is now protected from unauthor-
ized access.
How to secure the network trac ?
4. BUILDING A PUBLIC NETWORK
