Inovalley MID106 User manual
WIFI TOUCHPAD
Ref.: MID106
- User’s Manual -
Please read carefully before use.
1
This manual contains important safety and operating information in
order to prevent accidents, please read this manual thoroughly and
keep it for future reference.
SAFETY PRECAUTIONS
To use this player safely, please read and follow the instructions in this
manual carefully before use.
Never use the player while driving or when operating any vehicle, as this
could cause an accident. It is also against the law in many areas. Take care
when using the player outdoors, especially when crossing the street.
Do not listen to music at very high volumes using the earphones as this can
permanently damage your hearing.
Keep the player clean and never store it next to a heat source or in dirty,
humid or wet places. Keep it out of direct sunlight.
Do not put the player in high temperature places (over 40ºC), especially not
in a car with the windows closed in summer.
Keep the player away from strong magnetic fields.
Please don’t turn on the device in where the wireless equipment is forbidden
or when the usage of the device will cause interference and danger.
Press the player’s buttons gently. Pressing them or the screen too hard can
damage the player.
Do not use the player in an electronics-prohibited area, such as in an
airplane.
Do not use the player in an extremely dry environment, as this can lead to
static discharge, which can damage the player.
Do not subject the product to harsh impacts.
Do not drop the appliance. This may result in damage to the product.
Do not attempt to dismantle or repair this unit yourself, Repairs should only
be performed by qualified personnel only.
2
We will not be responsible for any memory loss caused by product damage,
repairs or other reasons.
Disconnect the appliance from the power source when cleaning.
In order to prevent program failure, never disconnect the player suddenly
from a PC during downloading, uploading or formatting to prevent program
failure.
Use a slightly damp, lint-free cloth to clean this appliance. Do not dismantle
the player or use alcohol, thinner or benzene to clean the surface of the
player.
1. OUTLOOK DESCRIPTION
3
2. POWER BUTTON USAGE
Starting up：Long press the power button for 3 seconds.
Power off：Long press the power button for 3 seconds →click power off →
click confirm
Screen off and on ：Short press power button to turn off or turn on screen
Mandatory shutdown: If the device has no response, long press the power
button for 6 seconds to perform mandatory power off
Notice: In case of no necessary conditions, It's better not use mandatory
power off. Power off should be performed normally according to the standard
steps.
Reset button: Press “reset” only for power off, and users need to power on
again after “reset”.
3. TOUCH SCREEN
According to following user guide, and know how to use touch screen.
Click: Click an optional icon on screen as your choice.
Longer press: chose one icon and press longer, can drag then show the
icon on desktop menu.
Dragging: Icons can be put into different screen interfaces by dragging the
icon between different screen interfaces.
☆To protect the screen, please don’t put any objects above the screen
surface.
4. WI-FI NETWORK SETTINGS
1. Since many functions need Wi-Fi connection to be enforced, Set Wi-Fi
network before using.
2. Click setting →Wireless & Network settings。
3. Choose and open Wi-Fi menu to enter Wi-Fi settings.
4. Then all usable Wi-Fi networks can be automatic searched and
4
displayed .If showed as among the Wi-Fi networks.
And then input password to connection
Click the Wi-Fi network you need →If need password then
input it →Click link
5. Press HOME button to back desktop
☆ If the Wi-Fi set is hidden, wont be searched out of itself.
Need to click add Wi-Fi network, then input relevant
information to add your Wi-Fi
5. SETTINGS
1. Connect the 3G USB dongle to the USB host of table pc. After connection
is made, the LED will be on from the dongle.
2. Make the connection settings of the local operation. Click the “settings” on
the screen of the device.
5
3. Choose below screen “Wireless & networks”, Choose below screen
“Mobile networks”
4. Choose below “ Access Point Names”, Then there is below screen:
6
5. Click the “menu” （right upper corner icon ，or the
device to press“MENU”button）,There is a below menu, and
choose “New APN”, There is a blow menu in the screen:
7
6. For WCDMA, we take our Chinese WCDMA mobile operator as example to
set the following :( for your country WCDMA, please refer to your local
standard to set the above)
7. After the setting is done, and press the “menu” button again, there will be a
below screen as shown, and click “save”, the setting is finished for the 3G
USB dongle.
Name：3GWAP
APN: 3gnet
Proxy：Not set
port：80
MMS proxy: Not set
MMS port: Not set
MCC: 460
MNC: 01
Username：Not set
Password：Not set
Server：Not set
MMSC: Not set
Authentication type: Not set
APN type: Not set
8
8. Return to the main screen of desk, there is a “3G” icon in the right upper
corner, and it means the connection is successful.
6. DESKTOP
☆Click on any program icon to run it.
☆Long press and drag icon, move it to other parts of the screen.
☆press longer and drag icon to move it from the desktop cleanup.
9
7. SCREEN LOCK INTERFACE
Can install automatic lock screen or quickly press down the power button to
achieve manual lock screen. Lock screen interface shown below:
8. PROGRAMMING INTERFACE
Click on the desktop to enter Programs interface
Table of contents
Popular Touchscreen manuals by other brands
Elecro Engineering
Elecro Engineering Poolsmart Plus Installation & operating manual
Johnson Controls
Johnson Controls IQ4 HUB installation manual
Elo TouchSystems
Elo TouchSystems ET2270L user manual
Elo TouchSystems
Elo TouchSystems ET1002L user manual
Elo TouchSystems
Elo TouchSystems 3201L user manual
Duratec
Duratec S15 user manual
