InMotion RS User manual
User Manual
Before using your scooter, please read the instructions, and keep this manual for ready reference.
Original instructions
1
Thank you for choosing the INMOTION electric scooter(hereinafter referred to as the scooter)! This scooter is an intelligent high-tech entertainment product. When
you use the scooter, there may be situations such as falling or collision that can cause injury and other risks. To reduce possible risks and ensure the personal
and property safety of yourself and others, you have the responsibility and obligation to carefully read the user manual, fully understand all the warnings and
precautions listed in this manual, and ensure that you can use it correctly. To obtain the latest feature/function information and safety guidance, please download
the electronic version from the official website. Important! Read carefully and keep for future reference.
Serial number (referred to as SN below) is a unique identifier for each product, which can be used for product warranty, maintenance, insurance claims, loss
confirmation, and so on. The SN is a 16-character numeric code that can be found on the packaging box label, the body of the product, or in the device information
section of the associated App.
GetclosertoyoursellersohecanreferyoutoanAppropriatetrainingorganization.
When riding an electric scooter, please wear a helmet, knee pads, elbow pads, wrist guards and other protective gear throughout the journey to reduce the risk of
injury.
All pictures in this manual are for reference only. Please refer to the actual product for accuracy.
GETTING STARTED
2
User Manual Quick Start Guide Power Cord/Adapter
Mudguard ComponentsHeadlights Reflectors * 2
Combination Wrench T-shaped Wrench M5 * 2
Reflector Stickers * 10
• Please carefully check whether the items in the packaging box are complete and intact. If any parts are missing or damaged, please contact your purchase point
or send an email to the manufacturer.
• Please keep the box and packaging materials for at least 30 days in case you need to ship the scooter in the future.
M5×30 Hexagonal
Cylindrical Head
Screws * 4
M8×16 Hexagon
Socket Head
Cap Screw * 1
M4×10 Hexagonal
Cylindrical Head
Screws * 4
M4×8 round head
hexagon socket
screw * 1
PRODUCT LIST
Notice:
3
Product Diagram
Handle Assembly
Dashboard
Central Control
Assembly
Horn
Stem
Front Headlight
Assembly
Folding Wrench
Assembly
Disc Brake Assembly
Charging Port
Front Motor Wheel
Front Clearance Light
Rear Turn Signal Light
Pedal
Tail Light
Disc Brake Assembly
Rear Fender
Rear Motor Wheel
Throttle Twist Grip
PRODUCT FUNCTION INTRODUCTION
4
Dashboard and Buttons
Left Turn
Signal
Headlights
Bluetooth
Connection
Speedometer
Right Turn Signal
Lock/Unlock
Single/Dual
Motor Drive
Cruise Control
Total Mileage
Battery Level
Headlights
Left Turn Signal Right Turn Signal
Horn
Power On/Off
Shift Up
Shift Down
Trip Distance
(Fault Code)
Fault Indicater
Drive Mode
cruise control [1]
[1]: Short Press: cruise control, long press: single/dual drive switching.
5
Icon Icon Name Lcon Description
Power On/Off Press and hold the power button to turn on/off the scooter. It will also automatically power off if there is no activity for
10 minutes, which can be adjusted through the App.
Parking mode 0 represents the Parking mode. The scooter defaults to the Parking mode when it turns on. Press the + or - buttons
to switch to the driving mode. You can also switch and adjust relevant parameters via the app.
Drive mode
1-4 represents drivie mode include four modes.
1 represents Eco mode with a speed limit of 32km/h.
2 represents Normal mode with a speed limit of 64km/h.
3 represents Sport mode with a speed limit of 100km/h.
4 represents Extreme mode, with no speed limit.
The modes can be switched in order by pressing the + or - buttons.
Note: The mode cannot be switched when pressing the throttle.
Speedometer Shows the speed of the scooter in real time.
Speed unit The Imperial System and the metric one,you can change the unit via the App.
Light icon Press the headlight button to toggle the headlights on or off.
Bluetooth icon The Icon lights up after the bluetooth connection is successful.
Cruise Control While riding at a constant speed, press the button to activate or deactivate cruise control.Long press to swith single/
dual drive mode.
Locking
To use the locking feature, the owner of the scooter must first authenticate themselves through the App. Once
connected, a lock icon will appear on the home screen. Click on the icon to lock or unlock the scooter. If the scooter is
moved while locked, the lights and horn will cycle and then sound a single alarm after 3 seconds.
Fault indicater The icon indicates that the scooter has detected an error. Refer to the error code table to find solutions.
Turn signal Press the turn signal button, the turn signal on the corresponding side will flash for 5s.
Battery level The battery level is indicated by 5 bars, the last bar flashing indicates a low-battery level.
Horn Press the button while the scooter is powered on to honk the horn.
Single/Double
Drive Switching
Press and hold the cruise control button while the scooter is stationary to switch between single and double drive
modes. The sequence of switching is Dual Drive -> Rear Drive -> Front Drive, and the driving mode icon will change
accordingly.
Product Function Introduction
6
Code meaning Explanation
101/201 Current sampling failure of drive controller Controller malfunction, please reboot or contact after-sales service for replacement.
102/202 Hall fault of drive motor Motor malfunction, please contact after-sales service for replacement.
109/209 Instrument did not receive data from the drive controller Communication failure, the instrument did not receive the controller data.
110/210 Drive controller did not receive data from the instrument Communication failure, the controller did not receive data from the instrument.
111/211 MOS over-temperature of drive controller The temperature of the controller board is too high, please stop riding and wait for
tcool down.
112/212 Overheating of drive motor The motor temperature is too high, please stop riding and wait for the temperature to
decrease.
114/214 Overheating of drive MCU The MCU temperature is too high, please stop riding and wait for the temperature to
decrease.
117/217 Overcurrent fault of drive controller Controller malfunction, please reboot or contact after-sales service for replacement.
118/218 Stuck fault of drive controller Motor stuck, please remove obstacles or contact after-sales service for replacement.
• The rst digit of a three-digit error code represents the faulty part, with 1 representing the front wheel and 2 representing the rear wheel
Notice:
ERROR CODE
Front/Rear Drive Controller Malfunction
7
Code meaning Explanation
003 Battery communication failure Battery malfunction, please contact after-sales service for replacement.
004 Undervoltage fault of the controller The battery voltage is too low, please charge it in time.
005 Overvoltage fault of the controller The battery voltage is too high, please stop using it and contact after-sales service.
006 Brake handle failure When starting up, the brake handle is not released, please release the brake handle or
check the brake handle.
007 Throttle handle failure The throttle is detached or the throttle is not released when starting up, please
release the throttle or check the throttle.
008 Battery error (undefined alarms, protections, and faults) Battery malfunction, please contact after-sales service for replacement.
013 Battery over-temperature The battery temperature is too high, please stop riding and wait for the temperature
to decrease.
015 Attitude sensor initialization failure Gyroscope initialization failure, please contact after-sales service.
016 Scooter fall warning This error will be reported when the vehicle tilts over 45 degrees.
Other Faults
8
产品参数
Specications Item Parameters
Basic Specications
Model RS
Overall size of the Scooter 1453 * 716 * 1320mm (default)
Net Weight Approximately 58kg
Riding Requirements
Max.imum Load Capacity 150kg
Suitable Height 150-200cm
Applicable Age Ages 16-60
Main Scooter Parameters
Normal Riding Distance [1] Approximately 120-160km [1]
Max. Climbing Angle [2] 26°
Max. Speed [3] 110km/h
Waterproof Rating IP56
Charging Time 8.5 hours
Temperature -10° C ~ 40° C
Storage Temperature -10° C ~ 40° C
Battery Pack Parameters
Intelligent BMS Overcharge, overheat, over-discharge, over-current, short circuit, overvoltage
Rated Voltage 84V
Rated Capacity 2880Wh
Motor Parameters
Rated Power 2000W*2
Max. Power 4200W*2
Charger
Rated Input Voltage AC100-240V 50/60HZ
Rated Output Voltage (DC) 84V 5A
Others
Display 4.3-inch LCD screen
Output Port USB type-C
Tire Size 11-inch vacuum tire (standard pressure: 40Psi or 2.8Bar)
[1]: Measured under the condition of full charge, 75kg load, ambient temperature of 25°C, and riding on flat, hardened road surface at a speed of 20~40km/h. The
range is related to temperature, tire pressure, road conditions, riding habits (such as sudden acceleration, suspension), etc.
[2]: Measured with a load of 75kg and full battery.
[3]: Tested on a flat, hard surface with no wind and an ambient temperature of 25°C at full battery and carrying a load of 75kg.
PRODUCT SPECIFICATIONS
Table of contents
Other InMotion Scooter manuals
InMotion
InMotion AIR Pro User manual
InMotion
InMotion R2 User manual
InMotion
InMotion L8 User manual
InMotion
InMotion L9 User manual
InMotion
InMotion SCV V5F User manual
InMotion
InMotion R1XX series User manual
InMotion
InMotion SCV H1 User manual
InMotion
InMotion P2 Series User manual
InMotion
InMotion e-scooter-l6 User manual
InMotion
InMotion T3 User manual
