InFocus LP280 Guide

LP280-LP290-RP10s-RP10x / Lamp Replacement

How do I install a new lamp? How do I reseat the current lamp?

1. Turn the projector off and unplug it. Let it cool for 60 minutes.

2. Turn the projector upside down on a flat surface.

3. Loosen the three captive screws the fasten the lamp module to the projector.

4. Lift the lamp module out of the projector. Dispose of the old module in an environmentally repsonsible

manner.

5. Insert the new lamp into the projector, making sure that the connector inside fully engages.

6. Tighten the three screws.

7. Plug the power cord in and turn on the projector.

How do I reset the lamp timer?

On the projector keypad, press the Menu button. Navigate to Basic > Setup > Service. Select Reset Lamptimer,

then press the Source/Select button. When the Lamp Change window appears, click the Source/Setup button

again to reset the timer. You can do this prior to 2,000 hours.

Other manuals for LP280

6

This manual suits for next models

3

Table of contents

Other InFocus Projector manuals

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Epson

Epson VS400 Specifications

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Epson

Epson PowerLite Pro Cinema 6020UB user guide

Epson

Epson PowerLite Home Cinema 705HD user guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual

Asus

Asus ZenBeam Latte user manual